Видео

it's nice, kind of feels like teeth smacking together with a soft blur around the edges, too bad it's not longer

Spacers are not used separately!!

@@Lalla_TS I mean do you use it with screw for top mount or only screw?

There's something I didn't understand. There's a rubber ring part between the top housing and the PCB when you fasten the top mount. I used it with the parts and screws!!

Yes, I took out all the foam. 😂😂

@@Lalla_TS you did the right thing!

No, it's better that there's no correct answer. I think it's better to enjoy it 😋😋

@@Lalla_TS Of course!

You must have worked on more.. I'm also happy that the results are good!!!!

@@Lalla_TS I almost gave up on this board until I modded it with force break. sounds so much better now.

I'm glad you're much better 👏

It would have been nice if it was a Tri-mode PCB, but this part is a shame for me too!!

@@Lalla_TS I have the wired version too. Sounds hollow if I go foamless.

@@DadTech1981 Yeah, I also felt very bad about that part. I was using it as a gasket build, then I changed it to top mount, and I taped it between the lower part of the keyboard top and bottom. It's not perfect, but it's gotten a lot better!!

@@Lalla_TS I think I'm gonna have to do some force break mods as well.

@@DadTech1981 Yes MKC75 keyboard is very demanding and lacking, so I have a lot of affection and it's my favorite keyboard!!

I think it was better because the hibiscus felt full

❤❤❤

🫰🏻🫰🏻🫰🏻

👍👍👍

Thank you 😋

I have some wobble, but it was okay for me~

이런 저두 BCP 스위치 이게 젤 맘에 들었습니다!! 근데 교체하다가 저도 망가질뻔 했네요 ㅠ,ㅠ 내구성이 좀 약한편인것 같습니다!!

Yes case reinforcement all used alu!!!

@@Lalla_TS Thank you! 🫶

Yes! There's no separate diffuser!!

Thank you!!!

Sorry for the late reply!! neo 65 no foam build pavlov seems ok with all foam build!!

답글이 늦어서 죄송합니다!!! 파블로프 디자인이 심플하고 구성품 3가지 플레이트가 기본제공이니 괜찮다고 느꼈습니다. 근데 올폼 노폼 빌드시 통울림이 좀 심하다고 느껴졌네요~ 탑마운트와 올폼빌드로 사용중입니다 통울림이 많이 줄긴 했는데 그래도 어쩔수 없는 부분이 있네요 ㅠ.ㅠ 상미니를 사용을 못해봐서 비교는 어려운데 상미니가 평이 좋다고 들었습니다 고민 잘하셔서 후회없는 선택을 하셨으면 합니다!!!

감사합니다!!! 조금이나마 도움이 되셨다니 다행입니다!!!!!

bsun sarokeys drawberry wine v2 It's an attractive switch. It feels heavy and full, so I'm very satisfied with it! In comparison, the ZUOCE LAVENDER switch was lighter and softer than the weight!!! When typing, it didn't need more strength than the drawberry wine v2, so it was a more comfortable type!!! It's my personal opinion, so it's hard to tell which switch is good!! Both switches are attractive, so~~~

Thank you!!!

Yes I think so too!! I only used factory lubrication without additional lubrication, but it's another attraction that it's squeaky!!!

Oh~~ I don't think you'll regret it if you add it to the list!!!

@@Lalla_TS maybe I'm just used to HMX price range but I'll get my hands on those

Good!!!👍🏻👍🏻

It's an attractive keyboard except that the space bar is a bit disappointing!!!!

@@Lalla_TS really? I am contemplating if I should cop this if I already have the zoom75, sonnet, and qk75n.

@@Lalla_TS Btw, nice video and you earned a sub!

@@DadTech1981 Oh, thank you. You are using a good keyboard.. Out of Zoom75, Sonnet, and qk75n, I only have qk75n right now!!! I prefer no-foam build, so compared to no-foam standard qk75n, I am very disappointed with the stabilization sound!!! It looks like you need to work on it separately!! If you are considering purchasing it, you can consider this and buy it!!!!

@@Lalla_TS same here, trying to avoid foams as much as possible. but there are boards that are well presented with foams in it. for the qk75n stabs, i just used the owlabs that came with it. maybe sometime in the future, i'll swap it out with something else. i am happy with its current config.

NEO65 is a very cost-effective product!!!

Thank you for watching the video!! I think the stem length is about 13.65mm😅😅

감사합니다!!! 기존 보다 압이 있어서 타건시 힘이 좀 필요하긴 한데 저는 오히려 압이 더 있는게 좋은거 같습니다!!!😛😛

Thank you!!👍👍

과찬이십니다!!😂😂

Thank you!!

I'm satisfied with the package because it includes PCB Plate! I feel a lot of pain towards the backspace key when building no form, so I'm a little disappointed in this part!!

@@Lalla_TS do you mean the sound without the foam?

@@petergriffin414 I prefer no foam build to all foam build!!!!

I use Discord website SNS!! Among them, I use Discord a lot!! There are many good keyboards, but I buy them at a level that is not too burdensome for my standards!!! Spending time with the keyboard is a fun and enjoyable time for me!!!😂😂

감사합니다!!😂😂

앗!! 구독 정말 감사합니다!!😍😍 히야신스 매력있는 친구죠 ~~ 히야신스랑 비슷한 느낌인데 푸딩이 좀더 쫀득함과 묵직한 소리를 들려주는것 같네요!!! 히야신스 사용하신다면 푸딩도 사용하시는데 무리는 없이 보입니다!!! 다만 로우피치 보다 하이피치에 가깝다 보니 사용하시는 취향과 환경이 어떠신지 몰라 저도 판단이 어렵네요 ㅠㅠ 이 점 양해 말씀 드릴께요!!!😭😭

얘도 하이피치에 가깝나보군요 ㅎㅎ 답변 감사드립니다^^ ​@@Lalla_TS

감사합니다!!😂😂 HMX 스위치 사용하면 다른 스위치들이 왜이렇게 아쉬운지 모르겠네요~ 😢😢

좋게 봐쥬셔서 감사합니다 😂😂

Thank you!!

키감이 상당이 부드러운 느낌이네요 PCB랑 하우징 때문인지 라벤더 스위치 보다 사운드가 더 좋게 느껴지고 꽉찬 느낌입니다!!!

워블은 좀 있긴한데 거슬릴정도는 아닌것같습니다!!

스위치가 가격이 저렴해서 궁금해서 사용해봤는데 워블도 적은 편이고 스프링소리도 괜찮은 것 같습니다... 기대이상이네요!!!

Keyboard : NEO80 PCB : Non flex Cut Mount : PCB Gasket(dumb-bell) Foam : NO Foam+Lower Foam Plate : Alu Plate Stabs : TX AP PCB 1.6mm(screw-in)(205G2,BDZ) Key Cap : SW PBT+ABS GRAPHITE Double Shot Switch : MZ Z1(205g0,105)

I built it using only the lower foam, not the all foam build. Neo 80 products tend to have a clacky tendency... I also prefer no foam to all foam! I haven't used GMMK PRO, so I'm not sure if clacky will look good on me😢😢

@@Lalla_TS ahhh okay, did you leave the lower foam just due to the spacebar being louder? Also have you ever lubricated your keycaps or any of your keyboards before?

All no-foam is fine, but I used the lower foam for sound and static protection. Stevils and switches come out well in basics, but I tend to use it with extra lubrication!!

넵 폼다빼고 하부폼만 사용했습니다 스위치가 좀 아쉬운 부분은 어쩔수 없네요 가격으로 위안 삼아봅니다~~

꽉찬 느낌이 아니라 가벼운 간질간질 재밌는 느낌이네요😂😂

저도 궁금했었는데 이정도로 괜찮을줄 몰랐습니다!! 상당히 괜찮네요~~😂😂

I liked that the switch was not expensive. I think it was soft and comfortable when typing. It might be more regrettable than the HMX type switch, but I think it's a good switch considering the cost

Thank you!!!😂😂😂

😅😅😅