Видео

Pwede peru konti lang po. Di katulad sa ibang brand.

Yes sir

Sa likod sir, right side.

Bagong bili lang din po ng ram hyperx po

Sir sana ma verify natin f ok ang ram. Peru bnew naman xa pagbili mo. Check din specs ng stock ram and compare specs sa new ram mo. Black screen means bad ram or bad hdd, hindi xa nag boot.

@@aqmgameshobbies8165 nacheck ko na po siya sir bali ok naman po siya compatible naman po huhu

Kahit anong brand sir na gusto nio. 2.5 inches physical size, 500 GB SSD.

​@@aqmgameshobbies8165 thank you po sir

Select the 5.1.2 audio channel configuration if you want 7.1 surround. If your movie is Dolby Atmos, select auto surround or pure direct.

@@aqmgameshobbies8165 tank you ı Will use dolby atmos

@@aqmgameshobbies8165 ypao do you need it?

Made in Vietnam

Dili na collection boss kay hapit na magoba cge gamit😆

For the update sir I just found out that at max volume it sounds bad, scratchy. I used an av receiver for this test maybe i messed up something with the settings.

Sir add nio lang 1x DDR4 4GB 2400 MHZ. peru pag wala ka makita ok lang naman 2666 MHZ. Sa SSD naman kingston brand, 500 GB ba maximum?

@@aqmgameshobbies8165 mabuti naman po kung ganon po sadyang tig 2666Mhz lang po available na 4GB DDR4 sa official store ni Kingston sir. Maraming salamat po.

@@aqmgameshobbies8165 up to 1tb naman po ang pwede daw po.

Pang office works lang kc to sir so far ok nman xa. Peru for gaming i will not recommend.

@@aqmgameshobbies8165 thankyou! last question po, magkano niyo po nabili? and thru shopee or lazada po ba?

Parang entry level lang to sir for gaming @ 100hz refresh rate. Hindi nya ma max out c ps5 na 120fps kaya. Mag 144hz monitor ka na meron nman affordable brand.

​@@aqmgameshobbies8165 yung isang monitor boss yung may GO sa dulo ka252q GO 120hz yon, kaya ba 120fps non sa ps5?

​@@aqmgameshobbies8165yung acer ka252q GO boss yung isang monitor na may GO sa dulo 120hz yon ma unlock kaya and 120fps nyan sa PS5?

Ka252q GO

Yes sir according sa specs it supports AMD Freesync hindi ko lang na try kc integrated graphics lang gamit ko.

Yes sir according sa specs it supports AMD Freesync hindi ko lang na try kc integrated graphics lang gamit ko.

@@aqmgameshobbies8165 Thanks boss!

Hindi sir. Ma tilt lang xa

Sad i dont have the temp before. But i can get the temp now by stress test using msi kombustor.

@@aqmgameshobbies8165 all good! current temps is fine :)

Response Time 1ms

Good day sir. Max is 4GB 2400 MHZ DDR4 RAM. peru pwede naman xa kung meron ka 2666 mhz, e downgrade lang nya ang speed.

@@aqmgameshobbies8165 sige boss, thankyou, have a great day ahead:)

Nice to hear it from you sir. Babolat does not make that model anymore. It has a roddick signature in it.

How much?

Whatt?😄

180 grit only sir

@aqmgameshobbies8165 thanks! And how long did you wait to put the cover back on the stereo after painting? Did you wait a few days so it could completely dry?

Sa ngayon ok pa naman po

Sorry for that sir but its only used for office works now. Ill update next time when they plan to use it in Auto CAD program

Just here in our place. local pc store

@@aqmgameshobbies8165 do you have link for your store? I would like to also buy anchor plastic buckles

LED Switch is for those PC Case that has its own Fan RGB Control Hub or Controller. There is also a LED button in the Case.

Sir tingnan mo c hdmi port ng motherboard, minsan kc naiipit ng I/O shield ang hdmi port ng motherboard. Try lang.

Thanks

Yes it sounds the same as the stock tweeter.

Its a brand new cpu/cooler. Just the stock thermal paste sir

How to be like you trader

🤕😶

From i wanna be a trader to vlogger

* Acer A314-32-C83Q

4GB DDR4 RAM lang po sir. Meron na kz xa stock na 4GB. Not sure if nka solder sa board. Total 8GB if you add d 4GB. Ayon sa specs nya, maximum 8GB RAM only.

28 po lahat sir

Is it the RGB SW or Rgb Switch? Is it located in the front panel ?

@@aqmgameshobbies8165 it's for the fans light I can light to single color

@@aqmgameshobbies8165 it's RGB sw

Yes. If you have the right thickness go for it. I used a good brand pads so its quiet expensive for me thats why I combined pads.

Yes it can be moved up or down

Thanks buddy

Yes sir. Install it at the M2P_CPU slot because your WD NVMe is already a PCIe Gen 4.0 and in the 2280 form factor.

No sir. Just the RAM. Thanks

Yes you can sir. Me i go 1/2 size higher for this model.

In the specs, its 2. 1 PCIe 4.0 x4 & 1 PCIe 3.0 x4 M.2 NVMe.

Yes sir its the PL -A350B model and I already purchased online 2 sizes of belt but its not the right size😔

@@aqmgameshobbies8165 I got this turntable used and restored the automatic stop mechanism. It came with a 5mm x 28.5mm**¿? and works fine. Just purchased this size online as a spare. As soon as I install it, let you know if works. ✌

@@aqmgameshobbies8165 5 x 28.5 mm This is the measure that works for me. My previous band is a little looser (maybe 29mm) and had variations in pitch. With this one it remains stable all the time.

Update sir: I tried the 5mm x 272mm belt and its almost similar to the stock. It works but its thick compared to the stock which is thinner.

@@aqmgameshobbies8165 Thank you! Stock one is about 4mm?

Naka solder sir sa motherboard hindi xa pd e upgrade. Wala rin nabibili na laptop cpu

Its just for me, 7. Good for low wattage speaker.

May be next time sir. I do not have Ti version. Thanks for watching

🙏 thank you sir. When will you have your setup?

Thanks for your input sir. Theres an indicator "UP" label in the plastic cover. Also I think airflow is going up not down since the evaporator and louver in your car is at the top of the blower. And when in recirculation mode, the air goes back and sucked in the blower.