Видео

Quite useless if your viewer is not able to see the results of your work.

So in short, you failed to find the exact apot and you failed to demonstrate what your title says.

Where can I get a torture image like this?

Use a fine torch tip of butane torch or Acetylene and oxygen torch as well with a very small flame.Use fine wire .018 silver with at least 99.9& silver with a special white granny flux for silver,not the clear flux. Clear flux will not adhere to the metal and is harder to solder to it.

it's most likely silicone oil or mineral oil to cool the resistor. To fix the metal to metal outside resistor is to silver solder it together and you'll be fine,it might read 51.0 ohms when done.

that foreground noise man....oof

Thank you!

What oil did you use, could you get the manual for it?

Now your car has cancer. Unless the emissions go into remission.

The transmission mount usually has no issues. I'd love to know why it needed to be changed.

Really helpful, thanks :)

Freakn rockstart dude, this is so useful!

What do you think, how do i find an OEM battey for this tablet on aliexpress or ebay?

Which tv is it

I have a Lexus es300 01, I need to past inspection? What things should I fix asap Motor mount Both front axle Steering alignment? Water pump Top engine mount Rear breaks He told everything to 345 But 159 his labor fee but he called me today n said my parts are 400 do this sounds right ✅ this car is beautiful but I just spent 700 on getting my windo fix window regulator

COME ON. SHOW US HOW TO DO IT !

Which mount would it be if going in reverse

What brand struts did u put on it?

Amazing good work

What is the diameter and length of the resistor in millimeters? You will not restore the resistor. We must look for a replacement.

Can I ask, are you in California by any chance? I have this tablet, would love to get it fixed!

Your car smokes expensive cigarettes lol

You guys are funny 😂

Very good Sir! Best tutorial i‘ve seen so far.

Nice!

All Hisense TV's unless they have a 10bit panel will only show a max of 4:2:2 chroma. Even the panels with 8bit and dithering to make it 10bit are still 4:2:2. The 7 series is 10bit but for some reason will still only display 4:2:2. Must have something to do with their panel tech.

Another pos talker..wasted time..gtf off you tube

Dios que plasta de tío que tranquilo explicando casi me quedo dormido

Yes I did it with 180 grit and red gray and white scotchbrite as well as a sharpening Stone and razpr blades on a 2000 Ford zx2 DOHC zetec which had a tsb for technitions that were having trouble installing new head gaskets and it worked perfectly and I've done it twice from swapping heads so that I could daily drive it and have a head to build and it works very well if you have the patience to literally get it to a mirror finish where ur reflection is in it.

you just fucked your engine up !!

Is this a KLDE or is it the miller-cycle engine?

so essentially you make sure it is set to pc mode if I understand this and my research correctly.

So you spent all that money and time for yourself or a customer?

Thanks 😸😸😸😸😸😸😸so useful !! So should i get a 43inch or a 50inch tv for pc and ps4 pro which one is the best choice for me????

Green slime = grease

I didn't see you do the work all i hear you talking only doesn't help me any good

Can you make a video step by step on how you made this smoke machine?

Hello . so is there total of four mounts all together

How many motor mounts are there total

My husband was having the same issue like you said getting to 33%. He bought his brand new and was having to issue. So we called Samsung and sent it to them. They replaced the battery and set a new power cord. Was still having the same issue call them and let them know had to resend. Haven't had an issue since

Actually, never mind my last comment. I followed your advice of using a flat tool and was able to get it off. I was trying to use this curved thing that New Power 99 sent me. Does not work well at all. I ended up using a butterknife and had much more success.

I have a Samsung Note Pro 12.2, so basically the same as yours but just with a stylus. I am trying to replace the battery right now but I CANNOT get that damn back cover off. It is very difficult to get underneath it and pry it away from the tablet. If you have any easy tips for this, I am open to hearing them!

Hey so did u have to unbolt the front motor mount to get the left transmission mount to go up high enough to get bolts to clear frame or how did u do it ????? I don't have a car lift ,but I could not get to go high enough ... Please reply thanks wayne

Could you please tell me from where I can buy the genuine Samsung battery for this tab

Valve Lapping Compound ???

Hi. I have the Samsung Galaxy Pro 12.2 tablet. I was watching the screen blink and restart at times. But when I put it with the charger plugged in it works fine. Will the battery be? Thank you hola. tengo la tablet samsung Galaxy pro 12.2 . estuve viendo que parpadea la pantalla y se reinicia a veces. pero cuando lo pongo con el cargador enchufado funciona bien. será la bateria? gracias

Normally when you put game mode on it reduces resolution, looks like it stayed the same on yours. Kinda makes me wanna get this TV now.

Good! Keep it up!

thanks for this video. Fix my problem.

Great video!