Hiiii! Nice video! I am thinking about doing the same to my c220, can you please tell me the dimensions of the final muffler part? That would be a great help! Thank you!
For anyone thinking about doing this, please don’t be cheap and not finish the exhaust all at once. I cut my muffler off, no tip no nothing and damn nearly melted half my bumper off , solution? Cuz everything from the res down , now I have a mid pipe, next is the 2 cats and a hoodstack 🤣
Bought a new headlight assembly, bought new leds and an adapter to only later realize it’s impossible to convert the stock HID to led’s since the car is wired up to support it. Thank god I found your video as I guess I’m just going to replace the headlight lens like you did. Returning everything back would be a pain. Own a Mazda 3 2009 GT
Good call, i was looking into LED as well but unfortunately i am not so electrically inclined. Also disclaimer, the HID ballast is removable, so you dont have to heat it up with the ballast attached.
@@kar2k i bought the whole headlight, and removed the clear lens from the new mazda3 one and swapped out my current lens, im sure i explained it on the video, if not i apologize
Dude , watching this vid helped me out. My dumba$$ put the back inner coils with that black piece under the coil instead of on top. Never smoke and then work on the car. Always smoke after kids. Lol Lessened learned. Lol Also, I bought black horse racing rear camber adjustment. Awesome feature to make the back wheels flush again. But I agree it not needed unless you have inner wheel rub on lowered stance.
@@Wildz True i just had to make sure it was not the kompressor, but i did a muffler delete on mine, it has a very deep rumble. Perfect for me, i just cut and then put 1m long pipe with clamps and done 😂
so i put these on yesterday but now its a pain in the ass to lower the spring in the back w the knuckle breakers the sent , so anyway how u do it? its hard to spin the collar for me on my mazda 3 because the car parts dont get me enough leverage
Sorry i never saw this comment and im sure you figured it out by now. You have you unbolt the control arm and lower the arm so you can get to the adjustable part
ik i ask a lot of questions but i just bought these and have heard mixed ideas , they call them bouncelands and stuff , how is the ride quality with these ultimos?
If you dont mind using the spring compressor to use the OEM top hats then go for it. Buying the set with top hats makes it easier to install since it prevents another step to install.
I have the same car this whistle sound is when you start the car this heats the car in cold regions I live in Lebanon it's kinda useless because the lowest here it can get to 9 degrees Celsius. Anyways when it turns on wait for it to turn off before you take off it's like an indicator when the engine is ready to spin if you know what I mean. Hope this helps❤
I’m sure this video has good information, but something has to be said about the damn sun making it difficult to see what you’re talking about. I remember making a video and the position of the sun at the time I shot the vid, made things extremely difficult.
How much does it cost for straight pipe bro?
Hiiii! Nice video! I am thinking about doing the same to my c220, can you please tell me the dimensions of the final muffler part? That would be a great help! Thank you!
Sounds like a Subi. Love if
Dead stream lmao
M111?
What's the pipe size.?
You still have those mini mufflers
I ragequit quietly with kindness and didn't break my gaming accessories. Then I drank some water to calm myself down. 😇
i had this today
❤️ 𝓟Ř𝔬𝓂𝔬𝐒ϻ
I straight pipe mine all the way w/ a long tube custom headers made by myself. It's loud af and won't stop shooting flames w/ a tune
That's not fully straight pipe!! I can see the 2 cats side by side. You just cut the mufflers and resonator. That ain't str8pipe
What you just said has been in my description for 5 years.. lmao
Yet another AFK farmer. Only this time, they arent AFK. Maidenless
4:30 when im at the area
🚴🚴🚴🚴👍👍👍
What temp so you have oven set to ?
190 degrees F
@@Wildz thanks good video bro
What brand is the Coilovers or can you send me the link because the one you have here doesn’t work
raceland.com/product/mazda-3-ultimo-coilovers-2004-2009/ Sorry bout that, it worked when i first posted
Update: the ballast can and probably should be removed prior to throwing it in the oven. Just need to unscrew it and unplug the cable inside
This just happened to us in cyber....
Happened to me 5 months before, that's a fun glitch :D
For anyone thinking about doing this, please don’t be cheap and not finish the exhaust all at once. I cut my muffler off, no tip no nothing and damn nearly melted half my bumper off , solution? Cuz everything from the res down , now I have a mid pipe, next is the 2 cats and a hoodstack 🤣
This is super dope. 🔥
Cool 🔥🔥
Sounds MEAN!
Bruh you didn’t even explain nothing
Other comments say otherwise.. yet here you are
Bought a new headlight assembly, bought new leds and an adapter to only later realize it’s impossible to convert the stock HID to led’s since the car is wired up to support it. Thank god I found your video as I guess I’m just going to replace the headlight lens like you did. Returning everything back would be a pain. Own a Mazda 3 2009 GT
Good call, i was looking into LED as well but unfortunately i am not so electrically inclined. Also disclaimer, the HID ballast is removable, so you dont have to heat it up with the ballast attached.
@@Wildz did you place the headlight directly in the oven or you placed it on top of something so that the metal of the oven doesn’t melt the plastic?
@@juliotheflame directly on, at 190° it wont melt the housing
happened to me today, almost nuked, had 27 killstreak
Custom games headshots option enabled
This was a public match though. Not private
Where did you get the clear lens replacement!?
First link in description, its entire headlight unit for mazda3
@@Wildz yea but you just changed the lens cover alone
@@kar2k i bought the whole headlight, and removed the clear lens from the new mazda3 one and swapped out my current lens, im sure i explained it on the video, if not i apologize
@@Wildz lol oh shit, no sorry I skipped through parts of it. Lol my bad
Condens
How did you convert from HID to halogen?
This is not a conversion. This is a clear lens replacement
Dude , watching this vid helped me out. My dumba$$ put the back inner coils with that black piece under the coil instead of on top. Never smoke and then work on the car. Always smoke after kids. Lol Lessened learned. Lol Also, I bought black horse racing rear camber adjustment. Awesome feature to make the back wheels flush again. But I agree it not needed unless you have inner wheel rub on lowered stance.
Thanks bro. Quick and simple explanation. 6:23😂😂
Can it raised higher?
your mercedes have a sound so beatiful look my mercedes on my channel
Nice! Remove the muffler and it will be way louder haha
anyone know how to put in the metal top piece for the rear coilovers
What top piece ? The top hat?
Is it a kompressor? Im thinking of doing something similar on my E230
Its not kompressor but it should sound nice too
@@Wildz True i just had to make sure it was not the kompressor, but i did a muffler delete on mine, it has a very deep rumble. Perfect for me, i just cut and then put 1m long pipe with clamps and done 😂
What’s a good Lowering coil over in Brian I for a 2006 Mazda3
Bc racing has a set for a decent price
What kind of exhaust tip is that?
Custom, unbranded
so i put these on yesterday but now its a pain in the ass to lower the spring in the back w the knuckle breakers the sent , so anyway how u do it? its hard to spin the collar for me on my mazda 3 because the car parts dont get me enough leverage
Sorry i never saw this comment and im sure you figured it out by now. You have you unbolt the control arm and lower the arm so you can get to the adjustable part
Sounds like a subie 🤣❤
Just way more reliable haha
ik i ask a lot of questions but i just bought these and have heard mixed ideas , they call them bouncelands and stuff , how is the ride quality with these ultimos?
how long did installing take you
About 3 hours going in blind.
hey im bought to buy these rn the exact same ones is it worth getting the top hats and why
If you dont mind using the spring compressor to use the OEM top hats then go for it. Buying the set with top hats makes it easier to install since it prevents another step to install.
My c230 makes that same high pitched whine. Any idea what that is?
Couldve just been AC, or it was just because of cold start. If I remember correctly it goes away after a few min but I dont have the car anymore
It’s fuel pump. Mine does the same thing.
As Vaughn Doughty said, its the fuel pump; perfectly normal.
I have the same car this whistle sound is when you start the car this heats the car in cold regions I live in Lebanon it's kinda useless because the lowest here it can get to 9 degrees Celsius. Anyways when it turns on wait for it to turn off before you take off it's like an indicator when the engine is ready to spin if you know what I mean. Hope this helps❤
Nice video, do you think there is much change with the suspension in the 2014+ Mazda 3? I have a 2015 and the wheel gap is ridiculous stock.
It shouldnt be too different, i now have an 08 speed3 and the 2nd gen is similar
Is this legal?
Yes, still has the catalytic converter
JustPerfected ahh word
kathalisator delete ?
No, resonator and muffler. Catalytic converter still there
@@Wildz interior drive is loud ?
is the check engine burning? Is the exhaust system loud? greetings
Check engine light doesnt come on for resonator + muffler delete. Only if you take off the cats. And yes it was pretty loud
@@Wildz thanks for answer :)
I’m sure this video has good information, but something has to be said about the damn sun making it difficult to see what you’re talking about. I remember making a video and the position of the sun at the time I shot the vid, made things extremely difficult.
Agreed, this was the first instructional video i did so i didnt consider the sun lol
My first video sucked too... audio was crap and the sun made it worse... had shadows, crazy reflection up the ass