Видео

DVI-D is what I've been using since posting this video

the "-D" is the important bit

Hey man no didn't have that issue. I would suggest that maybe the seal isn't in the proper position. Try adjusting the screws lower from where u find them at the moment and see if that helps the seal. If not maybe check if the rubber seal itself is in good condition and not dry-rotted. But I think adjusting the screws down a bit should help a bit.

I never did mine on my TT so I don’t know the system should be similar to the ones on the same year S3 cars

That’s what I said

Nothing that I noticed right of the bat, the car will adjust parameters slowly and with my cat fooler it’s probably just running rich and burning through spark plugs. I bet you would feel the difference with a tune for sure but as stock it only really made a volume change and in sport when it’s warm you get a bit of a backfire on downshifts over 4k

@@alex_aka_dev great stuff. I’ve had mine for about 2 years and it’s time to go in with the mods. What happened to the vids though bro? I was enjoying the content (it’s great to have a local that you can relate to)

@@officiallyKage Been super busy, got a job creating content for yachts overseas and its just completely taken over. Editing all week all year round makes it hard to get motivation to edit my own stuff in my free time. but comments like this definitely make me regret not putting in the effort. I have like 2 years worth of stuff filmed just not put together yet... for car content specifically I'm just away too much to get ideas. After this video I've removed my resonator and now it's kak loud xD

Still holding to today, if I pull on it the whole car moves🤣probably time for replacement but if it holds it holds

Give this a try, it should help out a lot. It works on the Q7 from what the comments say

I got these from The Carbon Bros in Joburg💪

Between 6.5L& 8.5L/100km depending on the drive

That would’ve been a great tip!😂

I tried this fix and it worked. Thank you has I had this annoying rattle for such along time. No one else is talking about this.

Glad to hear it worked Flyn! It’s so annoying

Hey man, yeah I checked my alignment afterwards and it seemed fine with no major gaps, i moved mine all the way down first time round and that looked funny but centering those screws was the move on the S3. Had to have my palm inside on the glass to lift it properly while tightening

That's epic man! Well done on figuring it out and thanks for posting it here I hope more people with Q7s find this comment. Glad I could help you out even if it was only in concept! :P

I appreciate the description, but I'm a little confused. I have a 2023 RS3 with a creaky sunroof, but it's only one panel for the sunroof, unless I'm just misunderstanding the terminology. In other words, when you say you "pushed up on the back panel" are you referring to the rear portion of the glass sunroof after it's retracted fully open? Or does the Q7 just have a different sunroof than an RS3? I've already had it at the dealership, which is 250 miles from my home so it's not very simple to do appointments. All they did was lube the tracks. It improved it for 2 weeks, but now the noise is just back again and driving me crazy. They also said the next step would involve removing the headliner, which I'd really love to avoid. Thanks again for the writeup

@hlf_coder6272 you lift up the back portion of the glass to get the two screws in the center. I have an 2014 8V S3. So you just loosen the two screws slightly to be able to shift the whole panel up and down within its bracket and then tighten. Do you have the new facelift model because I’m not sure if those have the same sunroof mechanism. Let me know if this helps💪

@@hlf_coder6272 I don't know anything about the design of the RS3, but I would assume based on my experience and this video, that there are adjustment screws somewhere that are now loose. The Q7 has two panels, the front that retracts over the rear panel. I pushed up the rear panel when the front panel was open to create more tension when closed. The front pane aligns & presses against the rear pane edge when closed. That eliminated any vibration & squeaks.

Could you add more details where to find those 8 screws? Heve a similar problem with my 4m 2016

Glad I could help Joe!🔥trying my best to keep up content just hard with work and travel, I’m backlogged like 2 years almost of content (not just car content but work now too)

Yeah, I watched those same videos but mine was extra stubborn and then lead to the cracking

No the body shape is way different :( try Ali-Express you might be able to find something

Really, maybe a dodgy mechanic did that. But wouldn’t be surprised if that mechanic was working for Audi😂glad you got it sorted, there’s no worse sound when driving. I’ve also found just opening and closing the sunroof helps for creaks if you haven’t used it in a while

23, got it as a gift from my grandfather :P There are 2 videos that both cover how I got both the amazing vehicles I was fortunate enough to own.

I’ll give it a go thanks man!

Hey man, no just a cat fooler💪

Thanks a Ton man!💪 glad it could help! Please share more tips cause my rubber on the glass seems to be squeaking now and adjusting the screws don’t seem to do much!

@@alex_aka_dev thank you mate. I’ve read that for the rubber parts and seals we can use some rubber products. I am actually testing the Nextzett Rubber care stick which should treat and protect the rubber. So far it so good but I didn’t have any issues with my rubber seals to begin with.

Few weeks in and to be honest I am still having the rattle noise. I will try to troubleshoot this with the delearship :(

@@georgiosvogiatzis1039 unlucky man let me know what they find. Mine comes back then I just readjust. My rubbers however are noisy but I just need silicon spray

Worth checking if there are any alignment screws u can adjust the glass with

@@alex_aka_dev yeah I've heard about the screws. It seems that they are behind a cover. I'l check it next weekend. 😅

Always a pleasure man!💪🔥

Thanks a ton Nico!🔥🔥

Still one solid, Sun rain or shine it stays on. even handles highway speeds very very well ;)

@@alex_aka_dev that’s great I was worried about doing high speed and it blowing off, all ordered now will see how it sticks down 😀

Just use a ton of tape if u do a lot of high speed it might be worth looking at securing it with something else. But mine has held up fine

@@alex_aka_dev will make sure I do, I have bought 3m tape which other people have recommended for holding spoilers down

@@alex_aka_dev would you recommend waiting till warm weather to install as in uk has been cold and wet for last month

I have tried hard to find them crashed this side... Service is about R900-R1200 dsg service etc gets more expensive

Now that’s the real question my friend… maybe one day😂or maybe it will happen one day when you play rocket league sober again😏

had to do it man! No other Choice would look as good!

@@alex_aka_dev It looks really dope, I wish to get it when I can afford it too..

They’re super hard to find depending on where u are. It took me months to find this one and any of the other mods too

Hi Kayla <3 Bly om van jou te hoor! :P

Not too sure if the the rear hatches are the same but it should I don’t see audi making another shaped hatch for a 3 door🔥

I wanted to get those too but now I’m scared to take these off again😅😂 and yeah it’s a 2014 model so I assumed everything has been baked by the sun a bit!

Thanks for the long time support my man🔥have considered it however it’s super expensive. I’d also change the wheels and add spacers to make it a bit more aggressive. Plus it doesn’t scrape!

Dankie Andrew!! Appreciate it buddy! El kort net tyd om dit actually te maak

yeah that's a bit of a tough one... have you tried putting some rubber care products on the seals? maybe check other parts too to see if there is any adjustment that can be done to set the height of the glass

I’ve never looked at those ones yet however it’s worth a shot if you can find 2 set screws with some adjustment try centering them and tightening them well

Have you tried ? Did it work?

Did it work?

2014 8V1 S3 (pre-facelift, <2016)

@@alex_aka_dev mine is 2016 bought new only has 55k km

Nice man! Congrats these are amazing cars!💪🔥

Not sure on the exact naming but I believe they are the previous Generation RS3 rims (8P RS3/S3)

Thank you Dyl🔥🔥

Howdy Mr SubUwU😉🫡

Thank you flow flow❤️

Hey man I did it at Kyalami exhausts in Joburg🙌

@@alex_aka_dev do you know of any place around kzn that does this

Unfortuntaly not my friend but just look for any place that does exhausts for GTI/Golf R it’s the same as the S3🔥

@@alex_aka_dev thanks my friend

Always a pleasure bru it’s durban there should be tons of places that do GTIs and S3s💪

Knowing that Skoda and Seat share parts I hope it gives you as much peace as it did me😂since this video mine needs a re-tighten

Yes, just a catless downpipe💪rest is 100% stock

@@alex_aka_dev no change ? Red delete 🤣

Planning on it still ;) just haven’t done it yet!

@@alex_aka_dev i have decat and res delete and stock final box, the sound is horrible.. bad sound

Any drone on highway with the res and downpipe? And yes stock sounded like a vacuum cleaner xD I also have a video where I show the decat of this car