Видео

Apart from different individual implements, are there any improvements in the Arc's basic frame and plier that make it better than the P4?

Good comparison, one note about the two sweat guards, the vedder would interfere with the manual safety hellcat, tulster looks like it rides right below the safety, maybe by design, so could be a pro for some. Also looks like tulster can accomodate the threaded barrel and comp.

that white insulation is on all these trucks, iDK why

Yes I have one on my raptor also a retrax.

You can set the 935 up to listen to local emergency stations. I also have ham repeaters set to listen to on my 935. My 935, actually registered 6 watts on a test.

nice set up dude!

Some people want to buy and ready to go, some people dont have dremmel to make adjustments bro. Tulster all the way veddor sucks. I love my profile its perfect

Even those benchmades dont have bearings

Thanks for the video! This is exactly what I was looking for a battery backup solution. Now I can use a lithium battery and my own charger and not have to buy a complete system that didn't have a compatible charger. I know I could have bought a complete system and not plug in the charger transformer but then I would get alarms because it would think I had a bad battery.

So it looks like the Hydro check doesn't have a charger which is good because it wouldn't be in conflict with my lithium charger. However, it appears to need AC power to work. Does that mean you have it plugged in to your inverter in case the power to your home goes off?

Did you remove the Watchdog monitor/charger? If so how is the float switch on the backup 12 volt pump connected to the Lithium battery and how is it activated?

I also have both the P4 and the Arc. Both of them are so much easier to get to the tools. Like you, the P4 became my favorite knife, over the Wave+. I like the textured surface on the P4 scales better than the Arc. It hides scratches so much better and looks premium as well. The Arc's Magnacut blade is truly supreme, and because it has a little hole in it for the thumb stud instead of a larger cut-out, the blade is even stronger. I also like the awl on the Arc better. It has a tip. What was up with Leatherman, selling an awl with a blunt tip (on the P4)? Before I got the Arc I was convinced that I would always carry the P4 instead of any of my other Multi-tools, but the Arc has won me over. Cheers, my friend.

Bravo. All IT guys think in the same way. Nice setup. In my case 1st 1/2hp pump is on city grid directly and 2nd 1/5hp pump is on 280AH lifePo4 battery + 2kWt inverter/charger (with passthrough mode when city power is on). In this case 2nd pump is working only in case of emergency when no electricity or 1st pump failure. From my experiences when sump pumps failed , it still draw some current, so you need to keep a 2nd pump on different line and rely on water level only.

You could still use longer ones, but you have to remove them before folding it back, correct?

how does this compared to King C?

These Begleiters have incredible action. The detent is perfect, it does sort of feel assisted, especially for the reverse flick. I have the tanto version and absolutely love it

I like Ameriglo sights but.when I stand in shade and the target is is the sun, I can’t see my Ameriglo sight at all. Thanks for making such a clear comparison in this video.

The ash pans go in the FRONT slot NOT the side. That's why you couldn't get it in the side properly.

The .76 is the best razor I have ever owned. Amazing.

Too bad you don't carry a multi tool to adjust your multi tool holster.

Hi bro, can you link me with where i can get these for my Glock 19 and 17 gen 3? I have been searching everywhere and cant find out the blacked out rear ... Are they discontinued? I can't find them on Ameriglo website....

Nice setup. I have two Pumpspy inverters and four AGM batteries three to five feet up, on a heavy duty metal shelf. In case of total failure or if the water heater leaks, hopefully it will keep them dry, until I can get the generator hooked up.

I wonder what your thoughts on the Wouxun KG Q10G would be?

Hey, the Merkur ist really nice, I also have this one. The head of your Edwin Jagger is the wrong way round.

I’m just posting this as possible advice for new campers: These things look incredibly cool, but as far as cooking performance, they’re pretty poor. You’re constantly feeding the fire, or adjusting it, so you don’t burn or undercook your food. You really want a tripod cooking grate to adjust height, or a stake-in-ground grate that’s height adjustable and swings away. And if you’re going to need that, you’re better off using a gasifier stove like a Solo Mesa or other. Much more efficient burning and you can use pellets. I myself bought the $40 WalMart clone, the 7” diameter Ozark Trail model. It’s a pleasure to operate and cook with.

One year later do you still like your sentinel?

What bit kit are you using to extend the screwdriver? I was just gifted a Suspension NXT & wanted to increase its usability for everyday tasks.

Does it scratch it tho

Hard to pick a favorite, but I have a Green Swiss Champ that has all kinds of stuff, including a hook remover, magnifying glass (plastic), pliers, saw, scissors, ball point pen, et al the good stuff. As for starting a fire with a magnifying glass, it can be made easier during certain months of the year when the sun is higher in the sky, and darker wood/paper will work best . Keeping the focused point of light is easier said than done too! Enjoyed your video.

Cool item. I preder the 3d printed option, because I have the ratchet and bit kit, so I need the aditional storage.

I am from Bangladesh. Can you provide me??

How many tools on the SAK do you actually use? If you say you use more than 3 you are lying to yourself. Leatherman has what you need and nothing that you don’t.

Just ordered this for the copper scales. I hope they patina well.

Word of caution for international customers. I’m in Canada and bought this based on this review. I wanted to directly support the company and not buy through Amazon. They redirect you to the international site. It ships from China postal and in the shipping fine print it says it could take 1-2 months. Mine has gone dark for 10 days with no shipping info once it was “on the plane”. Next time I’ll pay the extra 30$ and get it from Amazon. I wouldn’t mind so much if it was better traceable.

I carry 4 blades in my Surge sheath. Not the original one. 2 for wood, one for metal and one in kukri style for rubber or dirty things i dont want to touch main blades. Ive got Speed Wood and Basic metal from Bosch like you and a Progressor for wood. Ill look for the Carbide Edge, thank you.

Can't beat the game changer.

I don't have one, but you should try the Lupo .72. It's apparently more efficient than the GC.84. At least according to Italian barbers Razor chart. The Lupo is based and sort of a copy of the Wolfman WR1.. which is like a $300 just for the head. (Lupo = Wolf In Italian) I wouldn't focus too much on blade gap either. Rockwell on plate 5 is only like .69, but definitely more "aggressive" than the GC.84. I returned my Rockwells (6C/6S) due to QC issues and Blade gap bias.. + head was also too big. Did NOT enjoy that one, but you may be different. Lupo .58 is also more aggressive than GC .68. Ill prob grab my Lupo .72 soon.. Few things I want to order from IB.

TATARA- Let's make a complicated looking razor & slap a hefty price tag.

I have a Vedder for a Glock 43 and love it. I have the Tulster for a 43x. Both are quality. My problem with Vedder, however, is they nickel and dime charge for everything. Want FDE? $5. Need it optic cut? $5. Want the claw? $5. By the time your done and want this extras, it’s 15 to 20 more than the base price, which then makes it a overpriced (IMO) compared to similar holsters. However, the Vedder is the more comfortable and easier to use one. I’d take the Vedder

i've never seen victorinox broken pliers , but mexico made newer post 2017 leatherman has several on reddit

if the sog powerpint was made by victorinox, it would be the best tool ever made.

the p4 misses a diamond file for me, and the t shank or bit adapter

the P4 is the only one with QA and made in usa, not that i'm american, but there is a difference, they don't put the usa stamp on these days, sicne they make them in mexico on the other models

How’d it perform relative to the GameChanger .84?

How’s the display in the day / sunlight? I’ve seen some negative reviews of the Wouxun displays compared to others.

You think the scissors of the Arc can be replaced by the serrated blade of the P4 and the Scissors of the P4 replacing the can opener in the Arc?

Been looking for a video on this... curious to know if those "springs" that push on the back of the Arc to keep it secure will scratch up/wear on the tool alot...

I love the Ameriglo spartan with the orange .. have them on all my edc's

MagnaCut blade makes the difference between Arc and P4 atleast for me because I like the P4. The construction is top notch too.

im wanting the arc soon! and yep i agree the quarter bits from ali express are stupid money! i would like one but i cant pay like 60 bucks for that lol