Видео

Finally, someone who gives an answer other than "it depends". Thanks.

Thanks for the summary!

Love this guy!

What’s the TCM button?

Does this same issue also apply to the zoom f3 and f6?

How's the battery life of the X2T? Are you using a pair of 3000mah 1.5V battery? I'm wondering if the battery life last for months or days? If it lasts for months than I wouldn't need to buy spare batteries for this trigger.

Thank you very much; your effort in putting this video together is appreciated.

iPad 9 it’s noticeable seemingly the 24 fps at the 5-12 seconds, if you wear 2.75 reader glasses it’s noticeable to 20 seconds. On my Sony 40 inch 60hz tv all 24 fps is noticeable except the last slowest pan. The 30, 60 aren’t noticeable at all on iPad the 5 seconds at 30 fps was barely noticeable on the TV. Beyond that it’s unnoticeable

I am using a V860 III and TT658 II as backup. Never saw the need for a round head hotshoe flash, I do have the round head adapter too which came in useful occasionally. I use the AD200 Pro and 600 Pro when I do off camera. Oh ya, I love the flat-head flashes since I can potentially pack 2 in place of one round head flash. All in all, the flat ones are more practical and cheaper.. and yea, the V1 Pro is just a cash grab bring so darn expensive.

So 1 year later, whats your solution? 😋

Thx.,👍

Legend! I need to give this a go to see if it's fixes my issue

Hi, what is the difference between the Godox TT685ii and the v860 III?

Hi i have the sony a7c and the cable tetherpro usb-c to usb-c 15' this version is the 3.1? i have used capture one and ligtroom and it has been complicated i can not work with the auxiliooo heeeelp me please

Haha! You sound just like this guy. ruclips.net/video/1YCOT5LasKc/видео.htmlsi=ReIYnnO7fzneyAEq

Looking forward for your video about light setup recommendations .

Is possible use Ultrasync slate app jam sync the ultrasync blue to current time, then both tc-1 and ultrasync blue have the same time?

The App naming issue is just a software bug that can be easily fixed by any developer. Also, each time you try to select a recorder, the order of devices changes randomly, so you end up selecting the same recorder. I had to start recording 3 F2-BT at the same time and lost precious time on a wedding event. I have also contacted ZOOM for the same with no luck or interest to support. I end up build my own Android App that can handle multiple F2-BTs with proper names and aliases if i need to. But the timecode option is missing to me too.

If you are using multiple lights... With the X2T you cannot have only one light with the modelling light on. As soon as you fire the trigger, ALL the modelling lights will reset to whatever the X2T is set to. You cannot control them independently. With the xPro with the modelling lights switched 'off' on the trigger, you can manually turn on the modelling light of ONE (or more) flash head on the light itself and the xPro will not override that setting and switch it off again when you fire the trigger. Reset to controlling all the modelling lights in sync, simply change the setting on the trigger to off then on again. Probably not a big deal to most, but it confused me for a while until I figured it out!!

Gonna try eneloop again. Duracell was struggling AF even at 1/4-8 power.

Great video, lots of info and very clear.

I am going next week to Odda, I will follow on your steps , thank you for a lovely video

Hey Metal, thanks ❤❤❤❤

Excellent! 🤩

You are insanely talented at teaching!!!

Great work ❤❤❤

Cable length is 2m because a longer cable will result in loss of pulse power. )))

Ok sir I buy now

👍👍👍

👍

Thank you!

On my x2T I can change power of flash but it’s not coming back on my godox 600 the power stays the same

This helps me choose the X2 thank you

Can I put a deity tc1 on a cell phone to have the timecode?

I use the TT685ii along with the Godox PB960, I don't even know how many flashes I get out of it. Using it for Macro photography I'm only shooting at 1/64 power output on the Sony A1 - 10frames per second for focus stacking. If I recall I think the PB960 Power pack allows you 2000 full power flashes from one charge so doing the math I dare say I can get around 16000 flashes before needing to charge the powerpack up again. Using the Y cable too you can bring the recycle time right down, I would definitely recommend the powerpack if you need long use of your flash. The alternative in my opinion is to go for the V860iii with the rechargeable battery, great recycle times, 480 claimed full power shots and a lighter setup to carrying a powerpack around with you. My conclusion is to stick with the powerpack and TT685ii for my useage, while it means carrying a lot around, I can fire bursts off all day without the need to swap out batteries.

The SR1 fits any flash from any brand Godox, Canon, Nikon, even the AD200 (speedlight head). It makes things much easier for doing things like adding gels to the front of a flash. Set up a couple of different colored gels in the AK-R1 filter holders and you can just swap them out fast because they are magnetic.

I went to the camera store last year looking at the AD100. The salesmen pointed out that for a just a bit more, I could bump up to the AD200 (not even the pro) and get a lot more quality. So, I went with the AD200Pro along with a 450Pro. I definitely want another AD200Pro for outdoor work.

Thank you helped me decide on future workflow.

Thank you!

I have a TT685 II. Yes, it is slower. I used alkaline batteries, and it was about 2x slower than your video, or same amount of time slower when comparing your video at 1/2 and full power. But I still have my old AD360, which has a power pack BP960. This can be plugged into the front of the TT685ii (the newest version of V1 also has this port). At 1/2 and full power it is twice as fast as your V1 in your video. If I were using nickle metal hydride batteries, it may be even faster but I will never know because I will not be buying them. The only reason I would need to use the BP960 is if I am doing macro focus stacking with flash 12 to 24 frames, and I want less ambient light in the image and have to turn up the power above 1/32 power, which is rare unless you are shooting at noon time maybe. But that I have the extra speed if I need it is great. Otherwise TT685 II all the way baby. And I already had the round head adapter and AK-R1 accessories which I bought for my AD200.

Thanks for doing all of this and also go above and beyond by supplying separate videos to ensure the framerate stays intact. I've been encountering this after a travel trip and realized that even though 30fps with 180 degree shutter angle looks OK for static shots, when I am traveling panning everywhere, the motion blur prevents you from seeing any detail at all. Couple that with modern LCD displays lacking motion clarity compared to CRT but I don't have a CRT to confirm, maybe black frame insertion displays could help. If I was shooting a planned video or movie, sure I got the time to slowly pan or test out pans but during travels it's run and gun. Been contemplating shooting 60fps next time and I agree with you, chasing the cinematic look drives me nuts. Grading everything blue or yellow, underexposing, wide aspect ratios and grain to name a few.

Very Good Review. Thank you.

very interesting study - thank you! Viewed on my laptop with 59.95 refresh rate. The 60fps looked smoothest.

I had two - they both melted with black carbon buildup beneath the plastic lens, on the plastics that surround the bulb, and some actual melting of the fresnel plastic. Was very disappointed, especially after owned several Godox speed lights, 200s, a 600 and 300. Thinking back now, especially with the V1 in their product line, I don't know why they green lit this project.

ISO 200, SS 1/200 F8 on 24MP APS-C are Two ad100 on stand with white umbrella enough for reception, group photo.

Hi, Great video. I have a specific use case and was wondering what you would recommend. I shoot a lot of badly lit runway shows that have me at very high ISO as I can't compromise on the shutter speed. I shoot using a 70-200mm would you recommend the TT685ii for this still? (I've never used flash before) Thanks, Jack

Thank you for this - I think I’ll go for the X2

Hahaha short and sweet and to the point!! 😂

Hi! I am debating between V860iii, V1 pro and TT685ii, may I ask which you’d pick? Thank you!

Great video I need to make a decision AD 200 Pro or AD 300 Pro ? 🤔