Видео

Hello there ! . I would like to know if you have the following measurements. How many microampere does it give you at the minimum value of the potentiometer, and how many does it give you at the maximum value of the potentiometer? Thank you so much.

I had (still have) EE2003, EE2004, EE2005, and EE2006. Fond memories!

You can select in the menu how long it will stop on the frequency

Hi, how much would you charge to build one for me?

_Field Day_ is an interesting use case. This antenna would sure make a good *conversation starter!* What I find really _”interesting”_ is the case of a _multi-band_ antenna that’s actually good at 60 meters but not 20! 60 tends to be a _strange beast!_ I was looking at *_end-fed random wire_* antennas, and I was looking at what lengths were good for what bands. I noticed a few lengths good for 80 meters. Then some longer ones for 160. But 60 was conspicuously absent until I was looking at 160 meters. The shortest one on 160 omitted 60. Only the next longest antenna finally took in 60 - longer than an *EFHW* specifically for 60! I can't believe this video is *3 years old* and mine is only the *SECOND* command (and *9TH* like)! Great presentation! *73 de AF6AS in **_“DM13”_** land*

Thank you. I had EE22. Very cool.

Maybe mine is different, but I found the scan resume settings under menu #17 SC-REV, set it to SE and scanning stops and stays on channel.

I heard about this...what does it really do? Can it help my son wih severe non verbal autism?

Thanks, 3 years later. I built one 15 years ago. I included a fine tuning variable capacitor which really added to its usability. I also remember it possibly having a tickler coil. Unfortunately I ended up moving and lost the receiver. Having an amateur license I had an interest in rebuilding the receiver. I could not find my original schematic and tried over time two schematics found on the internet. I could not get neither working & it might have been a bias issue as you found. I do plan on trying to build the direct conversion receiver that the SolderSmoke channel designed for H.S. students but want to start with a simple regen as a prelude. I've looked on the net and having gone to grad school for math not electronics I was confused by some of what the net offered. I stumbled on your adaptation & knowing that it will work I grabbed screen shots off my cell phone and will give it a good effort.

Thank you!!!

Where can i buy that

My adhd won’t let me make one 😅😢

Thank you for the great video. Have a great day same hoby ,New friends come with a complete package 👉🔔🔔👍

Great video! I'd love to know when it was made.

It would be fantastic to re-master the audio in stereo instead of mono, current audio seems to be left channel only.

I played again with this radio ...Again the same results..It doesn't pick almost anything...I didn't try to replace the transistor with something different because sometimes It can help..The regeneration is not smooth at all ,little bit and it will blow your ears and little less and it doesn't oscilate..I tried to replace the coil with one for shortwave. I managed to pick some morse code ,but very very weak ...I think the design its not so great because there are others with one transistor radio and they work..I guess what he is recieving in the video is a local station ... Anyway it was fun..

how to make an fm radio transmitter using RTL-SDR hardware?

152 MHz is not in an Amateur Radio band. Only FCC type accepted transmitters can legally be used on that frequency. George CT

Percebo que já existe esse diagrama com o uso de somente uma bateria eu fiz o aparelho e coloquei os eletrodos na cintura o resultado foi que no dia seguinte consegui ir ao banheiro normalmente

thx 4 top video + explaining, i worked in new gnuradio with the QT stuff and the Soapy HackRF Sink, there use SampleRate of 4e6 not 44100*100, doesnt accept and gives error results

what a 2.5 mm socket and plug for if we already have 3.5?

Does it work

A vertical coil antenna is in exactly the wrong orientation for signals from any direction. Always mount the coil horizontally if you are not going to add a wire antenna.

This device is worth its weight in Gold 👍🏼 Easy to build …

possible to make a fm signal about 33khz?

Every single part of a radio is weird and hard to come by at this point None of this sold at the local walmart

What's that? Same phrases over and over again. Weird video.

Hi I love what you have done here. I am not technically minded, but would love this device. Is there a way I can pay you to build one for me? Thank you.

The title is misleading. This video does not deal with "Double band bazookas" It talks abot two separate single band double bazookas.

Could a vertical dipole for VHF/UHF/220 of a mobile fashion be added on top without causing parasitic interference in the hf antenna?

why would use wide band requency modulation to modulate a signal thats being de-modulated using single side band Amplitude demodulation? And also, I tried it and it worked 😆

nice audio file lol

This video is originally mine, and for your reupload to be compliant with the Creative Commons license of my video, you MUST credit the original author.

Thank you very much for the video!! Note: The Bulb1 is for the schematic of the colloidal silver. this one has only the LED

Thank you VERY VERY much. I would not have had a CLUE of how to wire this up. You are very clear. But what threw me, to which I had to sift through your examples, is when you substituted both a brown and later a black wire in your examples for red wire 'out' for number 1. I've been suffering from super resistant scabies. I'm hoping that this BobBeck device may 'execute' them. When I read the testimonials on the bobBeck site, I'm surprised out how many people, with differing ailments have been helped. There is a saying 'there may be a purpose for everything'. - I don't necessary hold to it, but in this case of long suffering, having applied many 'remedies' that have not worked, even making a Hulda Clark Zapper, but with no satisfaction, I've been completely stumped. I figtured then that I needed a much stronger 'zap', to which, searching the Net, I came across the BobBeck blood purifier, then your RUclips instruction section. Due to your help, I shall now go to work, make one of these and see how it 'fairs' out. I'm not sure how the 'colloidal silver' gadget side works and also wondering as to how the two stainless steel 'pins' are to be applied. I'm wondering at how many ailments that this gadget can help. There is much sickness out there. As a senior, for lengths of time I've suffered a throat infection that hangs on. But when I began using my home made Hulda Clark zapper, I've noticed that my throat has improved. You may have noticed that many seniors develop 'crackly' voices. It is this same form of throat infection. Both the sinus and the throat contain a pocket each to which such infections 'set in' and hang on. By the way, my name is 'Jerry Mecham', and I live in Perth, W.A. While watching your video presentation, and looking at your hands, I noticed that your hands look VERY MUCH like mine, shape, and even skin spots! - which gave me a giggle. Thanks again Oh, if you can give me any tips about the colloidal silver maker/circuit/ making, I will appreciate it.

really very amezing sir thank you so much sir

Great tutorial. Thank you, comrade.

Hi is it also possible for you to make a video how to build bob becks magnetic pacer? thank you

Thank you so much! I built one with your help. You are a Star!

Wow that is great knowledge I like it

Cant get this to work. No squeal from my 3904. Weird

I will be without this very important device & Colloidal silver 👍🏼 ruclips.net/video/EDk3Jlf5lGI/видео.htmlfeature=shared

Can you show me how to make one using 450v15mb

You need grounding rod, and better longer coaxial cable connected antenna to see how this wonderfully works. With similar design I got perfectly all AM stations that I can pick up on Sony ICF 2003 receiver. Antenna was 25 meters, good grounding, and gimmick capacitor connection to the coil.

I didn't get it. Ithought there should be 2 op amps. Also didnt get that mono vs' stereo. The output is mono so what is the point of the middle stereo ring connection ? Thank you for your work.❤👍

Great video!

On the parts list it says stereo and in the video you use mono. I ordered stereo which I believe will work if I use a jumper to the other side. Do you concur?

I wish I could purchase one of these.

Thanks for the video. It would have been nice if you would have let it focus before removing the board from view.

Hey friend, I have the flashing green light which turns off when I put the plug Jack in, like it's supposed to. I'm getting a small voltage down the one terminal but zero on the second. I know we're supposed to be measuring 3.92 Hertz which my tester won't do. Should I assume I'm getting the right Hertz measurement because I'm getting the flashing light?