Видео

@@jjustic you need to install it piece by piece but it's super easy to connect together and every connector can only go to one other connector

@@Dirtscootdesigns okay thank you i will probably buy but i need to wait a year for my license so if it will be still available i am your customer😅👌

@@jemrezeejemrezee9451 yep just the one side but since they are connected it basically cools both

@@Dirtscootdesigns ok ok theks does 2024 wr450f come without fan or?

@@jemrezeejemrezee9451 yes I believe it does

@@Dirtscootdesigns how much the new one?

@@onlygaming8106 you will need a pico PSU and a DC to DC step down converter if you plan on using a 4s battery set up, also check my later videos

@@Dirtscootdesigns how I am going to connect pico PSU and step down converter...in which sequence. Im planning to use a 90 watt hr laptop battery since my build draw very little power ..is going to work with laptop battery?? And what about BMS and all that charging stuff...

@@Dirtscootdesignswould a 200w pico psu be enough for my build and what sort of step down DC convertor do I need .. ?? I am using i3 12100 with 75 tdp GPU

@@onlygaming8106 they are cheap id just buy one and try it out, my setup draws 130 watts max and I use a jbd bms to control everything and also I believe my other video show the pack configuration

@@Dirtscootdesignsthank you for help it really helped me.. I think 200w psu would be enough as my setup draw 150w max under full load also I am going to under volt my setup to minimize power draw... can you provide link for the configuration video ....

@@RDEnduro that is already fused stock

@@WROHRC I saw your order! I'll be working on it along with 4 other orders from this week, tomorrow and Thursday I should have them finished up!

@@verza3512 there is an option for that on my website under Addons on the product page 👍👍

@@Rubes94 I'm not familiar with the tusk kit let me check and see how it works

@@Rubes94 if the on off bar switch has 12v coming through one of the wires when off you could tap into the opposite side that has no power when off and then ground to the chassis of the bike for ground otherwise that switch must just control the relay which is the most likely scenario and in that case you would need to connect to possibly the switch with the blinkers and stuff. My recommendation is to check the wires with a multimeter and see what you have

@@Dirtscootdesigns okay I have a multimeter in my possession, set it to the V setting? lol I’m electrically dumb But you’re saying there’s a chance the switch does not have power running to it, and I must find another cable with power. Would splicing into the horn/turn signal require use of those for the headlight to work? Otherwise I believe I’d have to splice the + right off the battery (using external 12v battery only for lights)

@@Dirtscootdesigns also thank you for got the help

@@Rubes94 the switch should have 12v coming into it somewhere for the blinkers and what not because all those switches do is control where power goes or what gets grounded one or the other. But yes set it to the v setting and there should be a up to 20 volts option or similar.

@@DjdDndnd-m4n my kit at dirtscootdesigns.com is designed off of that platform check out the DSD v2.1 kit

@@Dirtscootdesigns yes sir will do that is exactly what I need I’ll take your website into consideration. Would you recommend swapping my sprockets out to something Else considering I’m going to ride it on the road after the conversion? Something to run my gears out longer? Thanks.

@@DjdDndnd-m4n for sure switch to smaller sprocket in the rear!

@@Dirtscootdesigns cool thanks for the input!

@@Dirtscootdesigns would you happen to know or recommend a size or sprocket for my project as I’m stumped haha thanks.

@@alexveras6218 check out my website at dirtscootdesigns.com

@@ANDREWLOEBEL-g7u awesome! Glad I could help!

@@stephane5861 yes absolutely

@@stephane5861 will not work if you don't

@@RottenCottonSheep rubber isolated and what not for vibration id assume

@@Dirtscootdesigns very strange it wear quickly and more and more slack get. My others bikes are tight and rigid without some rubber

@@RottenCottonSheep add a couple washers on that bad boy and you will be good to go

@@Coco-Crisp25 I've got that exact thing available on my website!

@@r6live212 yes the kit is universal and the battery is still in development but almost ready

Great I'll be placing a order

@@jimtom4849 they allowed me to use my phone as a GPS speedo in utah

@@broedybelgarde4772 awesome glad to hear it! I appreciate the support!

@@WuFluChan sounds good I'll make that an option

@@dannygarcia6684 definitely! It'll be a little smaller and more polished when it's fully ready but I should have the rest of the parts I need to make it this week!

@@dannygarcia6684 haha you sir will be the first to get it!

It should as long as you tap into the stator or use a rechargeable battery

Check out my website at dirtscootdesings.com for my kit, I still sell similar options to this but better made

Yes it's basically the same bike, mine is a 24 450fx

That would be sweet!

You mean like the small ones that are pre built?

Thanks! And it's not an option yet but I can add that on the website if you are interested! And it should work with handguards because I let you make the last bend to whatever height you want

I do offer partial kits so I could make something happen for you

dirtscootdesigns.com/products/diy-motorcycle-blinker-kit

@jankyadventureswithjackson Thanks so much for the reply! Rare to find that from most companies. I'll be getting those pretty soon :)

This video was for a specific customer and each video is tailored to that customer but if you order the full diy kit for 150 dollars it would be step by step and how to do it and have instructions check it out at dirtscootdesigns.com

Still working great to this day

I would definitely be interested, I am actually doing some upgrades to it soon and could do something like that, my dirt bike street legal kits have been keeping my busy though

@@Dirtscootdesigns I would love to see a sort of kit that fits INSIDE the volume of the flex ATX PSU that includes a Buck & batteries to then pair WITH a pico. Maybe a standard hobby battery AND buck that could bolt together in a frame and fit INSIDE volume limits of the Flex ATX.

Anything that's a parts list and just bolts together would be killer.

@@greenprotag I might be able to put something like that together on my website

Glad to hear it! Thanks!

No problems at all they draw very little power check out my website as well, dirtscootdesigns.com

I think that in some states you can I could make it an option for sure

As long as you have a bill of sale I think you would be okay and the kits I make are 299.99 wheels run about 1000 normally for a supermoto setup

Yep plate mount is also in the works, a lot of states don't require mirrors and I figure anyone can buy those separately from Amazon instead if they need it

If you want really easy to see lights this kit isn't for you, it's basically designed to comply with laws but be stealthy and hidden. Also you can bend the mount so that the blinkers are not as close to the bars and easier to see

Also the tail light can be bolted as far back as you want to, you could actually have it sticking out from the fender

@@Dirtscootdesignsooh okay