Видео

where do I find the binding instructions for the 25amp esc in the NASCAR, the directions say either bind button or use a bind plug. There is no button or bind slot on the rx/esc???? part #spmxse3125rx

where do I find the binding instructions for the 25amp esc in the NASCAR, the directions say either bind button or use a bind plug. There is no button or bind slot on the rx/esc???? part #spmxse3125rx

where do I find the binding instructions for the 25amp esc in the NASCAR, the directions say either bind button or use a bind plug. There is no button or bind slot on the rx/esc???? part #spmxse3125rx

Ditto! I've gotten nothing but a runaround. WORST customer support system ever! Will NEVER buy from them again.

This was so helpfull, i needed this to install the EXB servo mount on my Mojave 6S. thank you.

Body slides back and forth on body post! Is it supposed to do that?

Dissapointed. It It automatically sets charge to 3A but takes 2+hs to charge a smart G2 2200mAh connected to a 12v 5A source, the same source I use with a couple of IMAX pumping 2A each to batteries that charge pretty faster.

I watched this video every few months to refresh my memory. Well done 👏

So after I changed end points now the steering DR knob works and AVS automatic gyro works automatically

Can you show how to get the battery indicator on the transmitter to work?

I have the NX7e and the USB port is the same used for charging the battery, is it the port to connect to the PC?

Hay, just to let you know AVC is working in REVERSE.

My wake 36 (not v2) has virtually no speed even at full throttle,how do I calibrate the original wakes ESC ?

What app has to be downloaded on the computer? I cant find it when I search.

Can you bind an SL2 remote two a sr215 receiver

How do you remove the shell from the yellow box athearn genesis sd70m? I want to do a board swap and cant seem to remove the shell.

Where do I get the extension?

Where can I get the cables to connect them together?

Beast

That’s no wrench!😂

Man my hull cracked after 5 runs

THANK YOU SO MUCHHHHH😊 EVEN THE rc shop was clueless thanks man

That fixed it, God Bless You!!!

I have a s665 servo and I started experiencing issues and I open it up and notice that center pin that holds center gear broke in half where can I get a replacement one ?????

What's the best size battery to make it have some good power for speed and hovering?

You are a jerk and need to go find another JOB!!!!!

Super freaking helpful thanks :)

Your battery could be dead

Plain and simple. Thank you.

Why pdf Plane differs with BNF model from Spektrum download files ? BNF: Flaps pos1 elev 25% pos2 elev 33% PDF: Flaps pos1 elev 16% pos2 elev 30% ??? Thanks in advance

Arrma CEO , hello! Please offer a roller with a clear body. They would move like hit cakes. $100 you still make money. No radio No Receiver No motor You know what I'm saying. I'll buy 10 or more right now 😊 Thanks for listening

Wilson Ronald Robinson David Thompson Elizabeth

I decided to move up the ESC just a tad and attach an M.2 hard drive heat sink with thermal tape to the top. It’s a computer part that costs a few dollars but I figured would work great to disperse heat in this application too. I then added a zip tie to the engine lines to gently keep things in space. I’m hoping this will significantly reduce my ESC temps on flights with my 4S batteries.

Thank you

I changed motor and esc after this happened and it has the same problem, I then took a different receiver from my other car and it still wouldn’t go, I’m struggling to enjoy rc cars now with all the faults, does anybody know what to do,help would be greatly appreciated

all the .05" screws holding the battery compartment seem to be stripped? I have a brand new wrench and it barely catches on any of them. I've tested the wrench on other screws and it works fine.

So will 2 batteries last longer in the car?

You didn’t tell the people that the gear ratio in the rear differential had to me changed to the same as the front differential or the front changed to the same as the rear differential either way they have to be equal or burned out gears are on the menu 😢😢

I’ve updated my v2 programming card to the latest Monster I think it is and the esc when I look it says no available updates My issue is the spektrum 120 black and silver Mojave esc is going into lvc with my lipos barley at storage voltage and almost a lack of power 4s feels like 2/3s at best My firmware is B5.12 Data base version 12-11-2023 tho I brought the car last week😳 Has anyone got sound advise please

Yea this didn’t help at all

Can you please tell me can the DX6E be programmed to the turbo timber evo to be used with all the available functionality such as Flaps, reverse throttle and safe (beginner, intermediate and experienced modes) with out compromises like safe will only work when flaps are down or sharing a switch etc. I hear that safe can be programed without using a channel these days? I also like the DX8E but I hear they have been discontinued? My next choice is the NX8+. thats a bit more money and the DX6E is on sale right now. Please help. Is the DX6E enough?

This video is completely useless!!!!

I do not have and ESC cable that looks like that???

Need to get you fat dang figures out of the way and tell what channel you are connecting everything to!!!!!!!!!!!!!!!!!!!!!!!!!!!

Not the plane I have, wing is in two parts, this must be the wrong QR code. Where is the one for STS 1.5 METER?? Hopefully the product is better than your wrong video!

I just purchased 2 brand new arrma infraction rc cars while on special. Both arrived with broken Spektrum esc's Extremely disappointing experience

It's too dark I don't know where to put the bind plugm

Pitch curve. You didn't review the settings for mode 1 and mode 2.

Lose background music. If you're doing high and low rates only why would you use a three position switch. Why not use the A switch.

Lose the background music. If you're only doing high and low rates why would you use a three position switch. Why not use a switch A 2 position switch? Your instructions don't work for an nx8 Plus