- Видео 6
- Просмотров 29 237
Henry Panza
Добавлен 22 июл 2016
C Notch Install Panza 2024
Install video AD-S10 bolt in c notch. Available for $150 shipped at coffeeandcustoms.com
Просмотров: 821
Видео
AD-S10 KIT explained June 2019
Просмотров 25 тыс.4 года назад
Explanation of my AD-S10 kit that allows you to swap a 47-55 Chevy AD truck body onto a modern s10 chassis. Affordable, professional and versatile. Bolts on with no welding required. Made in USA by Henry Panza
1954 Chevy Truck_Geronimo LS engine
Просмотров 1,1 тыс.6 лет назад
Carbed LS engine with 4L60E trans controlled by EZ TCU by TCI auto. Full frame off build, completely rebuilt engine, paint wiring etc all done in house. Upholstery is coming soon along with final assembly. Truck should now drive on its own, once snow melts I'll take it out. Need to make an install the custom tach and speedometer, wrap up the wiring and put the rest of body back on, do glass and...
air ride 1951 chevy truck
Просмотров 1,6 тыс.7 лет назад
finally putting air suspension on my personal truck. redoing alot of things on this as time and money permits. moving onto the rear suspension next. I'll be building my own triagulated 4 link and or a 3 link.
Carbed LS engine Geronimo
Просмотров 6147 лет назад
Second start up, full rebuild, stock cam, heads, pistons. Holley midrise intake, edelbrock 600cfm carb, MSD 6010 ignition controller.
Carbed LS engine 1954 Geronimo
Просмотров 5917 лет назад
Carbed LM7 aka LS1, MSD 6010 controller, Holley midrise intake, edelbrock 600 cfm carb. Full rebuild. Stock cam and heads. First fire up, I know idle is way too high and exhaust sux. Will fine tune it and repost. Was out of time and video for today.
Is this kit still available ?? I’m working on a 53 Chevy
Can I do a swap with a extended cab without cutting
Do you make kits for the 58 apache?
What headers do you run on a regulator 350 with your kit?
Where do I order
I want the cabe monts only
Email me from my website www.coffeeandcustoms.com
I want full kit
I want it
How much does a skit cost
I’m looking for a kit for my 1951 Chevy truck. I stumbled on your video while I was looking at the 504 kit. Looks amazing!
Where i can buy the kit for the swap s10 frame
How much is your kit?
Hw can I order ur kit
Hi nice job . Is original frame? Nice to see how yiu doing...lol. thanks
This is s10 chassis. first truck I built back in 2010. Im completely redoing it. Been off the road for 5 years, but Im doing full air, custom suspension.
Hacen envio a chile necesito un kit para una chevy 3100 año 56
Sorry late reply, did you email me? anyway, I don't offer stuff for 55-59.
Did you ever make a video of the install of your kit?
Sorry I don't get notifications on this, install vid should be coming this fall.
Are your kits only for s10 to Chevy cab or would this work with a 55 Ford cab as well
Sorry, no I don't believe that would work. But not familiar with 55 ford cab specs.
are you still around. I'd love to get a kit
Yes he’s still around. I just bought a kit a couple months ago.
sorry, don't get notifications on here. Yes making kits everyday. www.coffeeandcustoms.com
Great products. Only issue I had was the new clam shells were 3.5"while a small block chevy is 3 7/8 or 4"wide. Thankfully I had another pair on the shelf. Unfortunate part was I had to pull the motor again to change the clam shells. Double check fitment before final install.
Sorry late reply, did you buy my kit or motor mounts? any concerns you can email me or PM on social m. www.coffeeandcustoms.com
Do you have a kit for a 46 chevy?
No sorry I don't
@@henrypanza62492:22
Wish i new about your kit before i bought the 504 one !! Now I'm changing half of the brackets to lower my cab and everything else. This kit is 10x better hands down!!!!!
sorry late reply. code is a great company but yeah for air you cant touch boards. When you build another hit me up! I will have other products launching for suspension hopefully late 2022, its been alot of work getting to where Im at now, so time is very scarce.
How much for the kits
sorry late reply, as of 8-22 FULL kit is 1250 shipped. you can check my site for updates also www.coffeeandcustoms.com
Is this kit any good if I want to bag my truck?
sorry I don't get notifications on here, kit works great for air ride. Im working on other parts for air ride also.
I'm doing a 49 GMC with a s10 swap. Basically need all body mounts. I'm using the original drive line from the s10 so no need for any of that. Can you quote me this.
Hi, do have a kit for 56 chevy pickup?would like to purchase one.
Sorry late reply, I don't get notifications. I have done a few things for the tri five trucks but I don't really offer them right now.
hi, nothing on a kit for 47 chevy sedans at this time uh?, with an s10 donor of course...
How much is the kit
Full kit does all body, engine of choice, trans, both bumpers, hardware and bushings included $1100 shipped. www.coffeeandcustoms.com made to order right now.
So do you remove all original cab and bed mounts off tge s10 frame
yes I supply a frame prep page. plenty of info on frame prep on the net too.
@@henrypanza6249 how can i purchase a full kit with ls motor mounts
Hey Henry. This truck are 4 or 6 inches off frame?. .do you notch tie rod and rear diff too?
this truck is 4" off frame, small notch will be in rear, keep stock control arms, no tie rod notch 26" tall tire. If you have bigger tire you may need to dehump LCA or use aftermarket and or mount body 3" off frame
Too bad he is sold out of everything, I’ve been looking for a lot like this! 😪
Everything is made to order, contact me if you want on list. thanks www.coffeeandcustoms.com
Do you have a kit that would work on a 1953 Suburban
www.coffeeandcustoms.com/ad-s10-kit--fab-parts.html
How can I get in contact with you
sorry IG, FB or coffeeandcustoms.com
Still available the kit
How can i get in contact with you?
www. coffeeandcustoms.com
Honest question how much and where can i find this kit. Also i heard your name dropped from a guy on here that put an ls 5.3 into a s10 for his AD that allows the stock truck oil pan. Is this true if so id like to know about that to please and thank you. Your product looks killer definitely beefy as all hell !!!!
Looks a lot more beefier than the stuff that code504 is selling. Currently working on my own 1950 Chevy pick up truck debating on where to go original or get the S 10 frame which I’m most likely going to do wondering what would be the cost for the kit
its been just over 1 yr since this young man has put this kit out to the public . He has figured it all out for you ,put all his efforts into this kit (and more) that he makes by hand and sells . I bought one of his kits this past summer 2019,for my 1951 Chevy 3100 ("35 year dream truck " I've wanted since I was 17...)and I'm still slowly working on it given my time and funds hold out. So far it has been pretty spot on as per his instructions . Only a couple times Ive had to ask Henry about something that came up I didnt understand and only once there was a manufacturing thing on GMs part . I had to notch out and re-plate in a tiny angled spot on the frame where a motor mount bolt would not pass through , but thats all. I keep in contact with him as I work on mine as a blog of sorts to give him the end user/customers view of how his kit goes together so he knows his parts and instructions work as intended for a specific height application most guys will use. Hes a very nice guy to work with . Hes a one man shop and his quality is incredible. Plus, he is constantly coming up with more ideas and products for us . If you're considering doing the S10 frame swap for your AD Chevy /GMC project , use this guys kit.
First to comment