Видео

What does it mean to have a dc :002?? Please help

Hi, you got great demonstrative videos! Please tell me... Apart from Reballing a gpu chip, can the chip carrier/socket be Reballed too?

I'm going to fix a friends controller for her and this is great. I'm looking at ordering the tactile buttons, should I be ordering AC rated or DC rated buttons for the voltage? I'm thinking DC but just wanted to confirm. Thanks!

Really good video, easy to understand. Seeing the explanatino on paper then seeing the actual pieces helps a lot, thanks ! My projector has a big stain and I've been trying to find explanations on my problem and how to fix it, thanks to this I will probably be able to do it!

Please share store link if possible..i cant find it on google

No word of a lie. 100% facts and works. Tried literally minutes ago in 2024 and works a treat! Thumbs up!

Hey what was the voltage of the 30 pf capacitor and do you have a link to the led chip this would save my lights 😊

What are the RCA outputs for? … just bought one and has no instructions 😵‍💫🤷🏼‍♂️ My God I wish i had pulled it apart i could have retro fitted it instead of the hard work i went through trying to fit into limited space 😂

Not with Land Rover optical system...

"do not breathe it, it causes cancer" *10 seconds later* "Ooh, it smells" *_*

hi max I have the same problem also with mine Denon conroler MCX8000

thank you very much for the good tutorial sir..

This is so satisfying to watch. It's been years I've not tinkered with electronics

Is there any way to edit the favorite radio list? I can't find a way to edit the 6 saved radio slots

Where can I download the tally-ver-3-2.bin file

❤

Is there any way to convert benq w710st to 1080p with replacing dmd?

My VSX 521 was left outside the dumpster if you want it...I switched to Denon

Can you tell me the name of the wire mentioned in 19:20

Can we replace the wires which was connected to the coil with copper?

Can this be cleaned instead of replaced? Is this actually a dirt or mechanical damage?

Great video! I'm having a problem with the output polarizing filters on my Epson EH-TW5650. Would you know where I can find replacement filters please?

Thank you so much.

I haven't made boards since 70's shop class, and wanted to get into it again and see how they're done today. This was the perfect video! Thank you so much!

Hello, the radio knows the rds ???

Thank you

Hello, I have an Epson 697ui and the top 1/4 of the image flickers/flashes mostly green and the rest of the image is perfect. Would this be an electronic issue or is it a bad connection or bad lcd on one of the lcds in the engine ?

Excellent. I had suspected that was how it.was.done, you confirmed it. Btw t his is nothing to do with Canbus, this is analog.electronics. ( we used the same analog technique in a combat aircraft control panel in 1970s to save weight, and cost of dedicated databus..

Great video. I am wondering if you tested the wires that connect to the motor. My wires are showing mah's fluctuating in voltage. Is that supposed to occur?. Because my bin works well for a while then it stutters trying to close. Batteries are showing 9.2 volts which is normal. I'm wondering what you would say about this. I know this is an old video. But thanks for Making it.

F*ck! It's melted on 150 degree

Hi! Maybe do you know where or what to repair. I repaired close mechanism to tape but now is closing and opening again?

£1000 new!

Thanks for the video 👍

Hello, how bright should the leds be?

Hello how can I get pcb

So how do you “unspring” a coil, make long and straight again? Just same concept?

do you ever use this with liquid pcb solder mask ink ?

driveที่สองอะไรกูงงมากกูเห็นแต่มึ่งใส่driveเดียวแล้วก็ปิดฝา

Great demonstration. I'm looking to replace some bga memory chips and im watching videos to figure out how

Where is possible to buy laptop cpu chipset? Cause I’m looking for it everywhere online but nothing

thanks for the breakdown✌️

This is for those with experience fixing circuit boards. Question is it possible the moisture from the trash will rust out any circuit board.

This is wonderful

Hi Max, brilliant video, very detailed. I have a ceiling mounted epson tw7300 projector that shows a vertical blue one third left of the screen. This line appears after a few minutes of use and generally on bright mode. It clears off while using digital cinema setting. Line appears quite late when room is cold. When I play a video of full blue screen, there is no line but is immediately visible when blue screen clears off. Line shows up as blue on black screen and shows us as pink on red screen. Any thoughts which part could be faulty? Thanks in advance

Gracias por desvelar el secreto de enrollar un cable correctamente

Epson tw7300, I have a bit of red bloom in black and white (text area) but only at the top and it's very very faint.. so I wanna prepare myself and know if it will also be the same polarizer located in the prims that I would need to replace,

Nice work. I love the tip that you spray water on the PCB before putting on the Dry Film to make it easy to get out air bubbles - thank you. With Step 5 - Is Soda Ash (pH Increaser) do the same thing?

Is it possible to just add solder to the bord and chip then heat up rather than reballing?

I’ve googled for hours can’t find my head unit resistance wiring diagram. Boss BE7ACP

I want to use L3P08 L3P09 L3P010 instead of LCX111 LCX124 LCX101 LC080 in projectors is there any method or software that I can use