- Видео 20
- Просмотров 31 380
Joe
США
Добавлен 14 сен 2011
11th Gen Honda Civic Si PRL High Flow Intake Unboxing
This will be my first unboxing video. I will be going over some of the upgrades I have made to the car so far and some future plans once we install this high flow intake in my 2023 Honda Civic Si.
Просмотров: 59
Видео
Glock 45 Field Strip and Cleaning ASMR
Просмотров 695 месяцев назад
In this video, I take you through a quick field strip and cleaning of my Glock45 pistol after a day at the range. This is not a tutorial. This is one of my first videos I'm posting around guns and would appreciate it if you would provide ideas for future videos and lastly, Like, Comment, and Subscribe. Thanks for watching.
Griot’s Garage DI Water System Review and Test
Просмотров 27 тыс.3 года назад
I recently purchased this DI Water System by Griot’s Garage. My TDS readings were 163 from the tap. Once I installed the DI Water System everything changed!
Subaru BRZ Cinematic
Просмотров 985 лет назад
2016 Subaru BRZ Cinematic Video. Shot on a Canon Rebel T7i with a FeiyuTech A2000 Gimbal.
Wekiwa Springs DJI Osmo
Просмотров 235 лет назад
DJI Osmo at Wekiwa Springs State Park. Song Post Malone- Too Young remake instrumental
Ninja 650 Cinematic
Просмотров 3275 лет назад
2018 Ninja 650. Still playing around with Premiere Pro. Disclaimer: I do not own the rights to the music. Credit to Apashe and Cherry Lena- Felling Good.
Punta Cana
Просмотров 586 лет назад
Majestic Colonial Resort located in Punta Cana, Dominican Republic. I do not own the rights to this music. Credit to Chuki Beats.
Dodge Charger Strobe Brake Light
Просмотров 9406 лет назад
Strobe Controller for 3rd brake light on my 2012 Dodge Charger. I ordered this controller for $9 on eBay.
The Golden Girls Intro
Просмотров 3727 лет назад
An intro I made since my wife loves the Golden Girls more than anything. Disclaimer: I do not own the rights to this song. Credit goes to the Golden Girls Theme Song.
Chevy Colorado The Hills
Просмотров 1617 лет назад
2005 Chevy Colorado Xtreme. Filmed with Canon Rebel T3i Song is Radioactive by Imagine Dragons. I do not own the rights to this song
a.co/d/bGdYu0Q
Where did you order your TDS meter from if you don’t mind me asking
a.co/d/7ZuFLWK
Thats a nice setup.
Hi, I have this product. When I'm done using it do I have to empty the water from the tank or leave it sitting in the tank till next week's use? Will it damage the resin?
great video thanks for that! where did you get those wall bucket mounts?
They are Gladiator Gearwall panels and hooks.
This is great but how long does it last? How do you regenerate the tank?
It all depends how much you use it. I’ve had it a few years but don’t use it every weekend and I think it’s time to replace the resin. The resin is about $95 and it comes in a bag that you pour in the tank.
It's really cool bro
Bro what is the name of this product? I NEED IT ASAP
Just a tip. To prolong the life of your DI tanks make sure you pre filter the water as chlorine is the number one killer of the DI resin. Filtering 99% of chlorine out of the water and other impurities like metals and other minerals will highly prolong the life of any DI filtering system.
Are there any pre-filters that you recommend? Thanks
@@robertsheffer1989 yes. The clear source rv 3 way filtering system. It’s the one I got.
@@JCKICKS213 Awesome. I will check it out.
Wheres the link
In AZ that first reading you got is our water after going thru Brita filter. Outside faucet water is close to 300. The spots are ridiculous no matter how fast you dry or how much shade you’re in. Definitely need one of these.
I purchased one but the seal was broken where the 2 bypasses connect. They’re sending me another one. I wonder can you use this with a on demand pump connected? Or will it be to much gpm for the tank?
Their customer service is top notch. I had the same issue and they replaced the connector l. Also it has a lifetime warranty. Now as for the on demand pump, I’m not sure.
How did you realize the seal was broken where the 2 bypasses connect? Like the plastic was literally broken, or the TDS was roughly the same between when using the bypass vs. not?
I bought this for a solar panel cleaning business, I LOVE IT , I also bought extra resin sand with it overall I paid almost 500$
How many gallons can you use before changing the resin.
@@lel3450 I just go off the houses instead of gallons maybe 40 to 50 houses before refilling it with the sand from the website, I only use it for the final rinse to help conserve it
Thanks for the info, sir. Do you find that a pump is necessary to get the water up to the roof for decent flow?
How did u wire them?? Im trying to do both of the sides cuz i have 2 kits but it has 4 wires and i have no idea how to know which is which
How's the DI system holding up so far? Any idea how many gallons you have gone through so far?
That’s the ?
for the free spot I have to buy the two filters or just one and how many cars can I wash with that?
Can I use one of those and run the whole house and have clean water but with 2 of them connected?
Great video! Thank you I have a 65 gallon water tank for mobile carwashes.. can i lay the tank On its side when im not using it?
Thank you. I would not recommend laying it on its side because the resin is like sand. Find a good location for it upright and it should serve well.
How often do you refill the resin
Time is probably not as accurate as how many gallons or washes have you done with the variable being how high the tds is where you live.
what pressure washer did you get?
How many gallons do you have to run thru the system, after soaping with hard water, before you get back to zero dissolved solids when turning the valves back on for the tank? 10 gallons everytime? Curious if you measured that too (or can and comment), tks.
I have not tried this but I will next time I use it and let you know.
@@NYAJoeJr tried on mine. About 1 gallon to flush.
Where did you buy that wash bucket wall mount/holder? I can’t find it online anywhere. Many thanks!
It’s Gladiator Gear Wall. They have hooks.
Where did you get those bucket wall holders?
How many gallons can you get off that ?
It depends how hard your water is to start. I believe I can get 4000 gallons before I need to replace the resin. I only use it for the final rinse and when I’m using the foam cannon.
@@NYAJoeJrI think your 0 button got stuck
How should I store this for winter time? thank you for the video
I just run some water through it if I’m not using it at least once a month. I’m in Florida though so I use it year round.
Great video, how many washes can you do before you change the resin? This is not bad for $300 dollars, I might order one.
I think about 4000 gallons so it all depends. I myself bypass the filter when doing initial rinse. I use DI water for foam canon and for final rinse only. This helps save the life of the resin.
@@NYAJoeJr thank you for getting back to me. I have looked at other systems and l keep coming back to this one. Iam set on buying this one for the price and the amount of gallons of what’re it provides. Thanks a lot and happy detailing.
@@cal88usa it’s definitely worth it and is the best system out of all the ones I spent weeks researching. Being able to bypass the tank with included valve makes it the simplest and cleanest look without having to buy a bunch of other PVC to build your own bypass. No brainer here.
@@NYAJoeJr 4000 gals??? Do u have that # right?
Appreciate the video and the replies. When you are by passing the DI filter for pre-rinse, and initial rinse after contact wash, what sort of bypass are you using? I can't imagine that you're actually disconnecting/connecting the hoses from the bib and DI system to the pressure washer each time?@@NYAJoeJr
I dont know if you ran into the same problem i did but first time i hook up the deionizer to my active pressure, a decent amount of resin started to clog the hose inlet, i thought it was the pressure washer not working or something but it was the resin, hopefully i find a solution to it
The orientation is correct? I did not run into this at all. Call Griots if you have the same unit. Their customer support is top notch.
Did you make that small hose?
No, I ordered it on Amazon.
Flexzilla Garden Lead-in Hose,... www.amazon.com/dp/B01D51VBFS?ref=ppx_pop_mob_ap_share
Any update after pressure washer system? 163ppm from tap is good. I'm at around 600ppm from tap. I'm guessing would get like 5-10 rinses from this system.
I will test today. For an update. It stayed at 0 after pressure washer but today I will do a test for a 5-6 month review
@@NYAJoeJr I imagine it'll still be really good. According to griots spec's you should get like 1000 gallons out of it due to your low ppm tds. I'm looking for solutions with my super high ppm water. Patterson, CA has some of the worst public water in the state! I've never seen over 600 from tap and my tds meter reads 612-631ish. With our RO system under the sink I get 16 with a 2 year old filter.
@@snooka2484 ayyy I live in patterson too and the water is trash!!! Even using an RV filter and still doesn’t do good.
@@kuksgarage2715 @Kuks Garage Small world...and town. Yeah man I'm looking into a prefilter of some kind now before just throwing in the towel and using it lol. Is the whipple coyote yours? I'm running a whipple Sierra. I have it in the shop in San Jose for fueling upgrades...trying to break 700hp. Damn truck is too heavy!
@@snooka2484 lmk what you go with cause im tired of it and idk what to do. Been going to a car wash in modesto that you do on your own and the water is good there with all the filters they got lol And yes i drive a whipple coyote in town lol but broke the tranny so its out to get rebuilt and hell yea thats gonna be crazy!!! Just becareful with all the shits thats going around. Sideshows and cops cause they arent playing around anymore out here. You can follow my builds on IG @fox_yote302
What is the spec on the resin bag ? I mean is the resin are all the same ? I live in Canada and I'like to buy some. Thanks.
You want Di mixed bed resin any online water system company sells there are my kinds of resin but for spot free rinse you want "Di" resin makes no difference where you buy it. Sold in cubic foot bags about $200 usd.