Видео

Yep! That was my resolve. I put it on 1 and it is super responsive as if I had it at 0. Not sure on putting the dongle in the back, but assuming it would function the same. You trying to keep the front port open?

@ no I ask only if there are differences in the connection (better response time). And you can put the dead zone to 1? I have only the possibility to put it to 3 before its goes to 0. Do I need to update my firmware or ?

Ahh…yea you should be able to go from 0,1,2, then 3 in the app. Shouldn’t matter the port it is in. Try updating the firmware.

10000% agreed

Appreciate you!

Fortunately I haven’t had to deal w them as of late. What’s your experience?

Vader 4 pro doesnt have drift on 0 deadzones

@ Vader pro 4 has 5ms-10ms latency.....far worse than Elite 2......but it is cheap

Glad I could help!

Think it depends on the overall specs but if it is anything similar to my Mac mini m1, you should be fine with no overheating for as long as you stream. You just have to lower the stream quality so your audience gets a smooth view

Think it depends on the overall specs but if it is anything similar to my Mac mini m1, you should be fine. However I think MacBooks can be stronger. The chat link cable would connect to the capture card, controller and headset.

It’s a great controller. It my new main daily driver. The dead zone issue isn’t major as setting at 1 sets the dead zone at a minimum with no drift.

@@lbs ok ty for the respond

How so? This controller doesn’t calibrate like a traditional controller.

@ ruclips.net/video/ivF80D3-twM/видео.htmlsi=O0CXwDFzgFTuiDoY

@ ruclips.net/video/ivF80D3-twM/видео.htmlsi=O0CXwDFzgFTuiDoY

@ u can manually calibrate it there’s many RUclips videos on how. I had the same problem.

I agree w that all! Glad you found a great controller for yourself too!

Agreed!

@@lbs How do you select 1 dead zone? Can either be 0 or 3 for me

​@@SoulHorizon1313Did you figure it out ?

@@XEROCAR3 no. If I do I’ll let you know what I find

@xerocar3 You’re in the razer app and it is showing you only 0 & 3? What version of the app do you have? What platform are you on? Does it look anything like in my video?

1000% seems like a big oversight

I don’t have those often but when I do…they HIT!

Appreciate you sharing your thoughts

@ lol sorry maybe it was a bit aggressive, but thats my “rant” against Sony because I don’t think some things they did are fair.

@Mo_Moji hahaha…all good. I felt it was a vent aimed at them. I get like that too.

Nope. Not yet at least…

Great question! I haven’t specifically tested this, but I might dig in on it as my right stick almost felt “too responsive” out the box. But I was improved by adjusting in game settings in COD. But check out The PhotoTechy’s vid on resolution for this and other controllers. He tested and found the WV3 to be solid. ruclips.net/video/fkV3QLNQrps/видео.htmlsi=XWixp_4hyKtALjB4

@@lbs i saw the entire video , and all that makes me rethink all the reviewers showing the circularity tests and how those test don't show what PhtoTechy is showing. micro movement is specially affected by this and i believe what we saw there could vary from unit to untit , because he didn't even got the same results between the left and right stick . there should be no controller that is too responive out of the box , because they should get a linear relation till the top value. if it was improved , that should mean a curve or acceleration was added to help do micro movement, and that is never as good as a good linear sensor. the newer controllers many of them are now breaking this old numbers around the 100 like we see from different controllers in the video , the newer ones can reach even more than 1000 and have pulling rate up to 2000 Hz polling rate to report the increased numbers of signals . the problems shown in the video are not there for higher resolution sticks to begin with , and the Wolvarine controllers look so cool but the what what matters is the aim and sensors inside , and those maght not be bad , but they are by far not the best in market , beaten by way cheaper controllers.

@monderkbaeli9411 thanks for sharing your thoughts. Sounds like you made your decision. But if you end up buying and testing and making a vid/review on it please let me know. Would love to support!

Did you set it to 0 in the razer app after the firmware update? also did you update it on console or PC?

@ I only play cod so put the dead zone on 0 in the app & the game, I dont have pc so I asume it updated itself when I connected it the first time to my xbox, I got the controller like 4 days ago

@kitsunehime5630 ​​⁠thanks! Was just curious because I tried to go to zero dead zones after the firmware update on console and it didn’t quite work, but I heard Ppl updated the firmware on PC had better luck, so I was curious. Thanks!

What’s the x, y on your sticks if you’re rocking 0 deadzones?

Did that develop or was that out of the box? I haven’t heard that yet and I don’t get that myself. so I’m just curious if you might just need an exchange or something that might develop w this controller over time

Thanks for sharing! You are not wrong. I think it’s the many understand that and what sparks lots of the frustration. I think the main thing is that users in general just want companies to utilize the sticks that work (Hall effect). They don’t want to have to tinker and upgrade these things themselves. Also, I think companies mention the Halifax sticks as a feature for this reason. They understand most are using pots and this is an upgrade to that. I don’t think that they’re charging a premium based on Halifax sticks because we do have some that are as low as 40 bucks on the market , but they are charging a premium based on all the advanced features packaged together…plus brand.

What’s the x, y on your sticks if you’re rocking 0 dead zones?

@ x, y? Clarify

@ in the Razer app, it shows your “center point” for each stick when you’re in the dead zone settings. It tells you the x and y offset of the stick.

You asking what I prefer for the stick sensitivity on each?

Thanks for the questions. Appreciate you. That is awesome! Would love to hear how it all goes, especially with the Pro.

Me too...I just said "eh screw it, I get paid Friday" and I bought it today....I get my pro next week. This controller really is fantastic

A marriage made in heaven, I’m blown away by both ! No regrets 😅

How are you set up to stream from your phone?

@@lbs elgato with obs on ios device

@RUclipsYudhveer I’ve never set up that way. What cord are you using to connect to your console? I would think that it would be a frame rate mismatch.

How do you calibrate the sticks? Thank you

How do you calibrate the pro version. There is a video out on the te version.

@@shawnzilla83 where? Thanks

Thanks for the comment. Yes this info is not widely known. How are you recalibrating the sticks for this version?

@lewisM1984 His link to this is in the description of this video.

Agreed. Seems like something they can add later via the software if they get enough feedback. But I like this ability too with the es2 as I like true diagonals there

Yes! I still use it and love it

@@lbs just sent back a g7 due to having nothing but poor picture problems.. hopefully I’m happy with this monitor thank you 🙏

Very light!

where you got it for $160?

100% update on PC if you can

So you’re saying the updates are different depending platform?! I will test

@@lbs idk it could be that I got lucky because my controller has 0 drift and it’s centered perfect at 0 deadzones after update

Update fw and left stick drifts.

@@Mrchiefsayggwhat the hell man. I’m at 0 deadzones and I get some stick drift. Even made sure to update the firmware

Thanks! Appreciate you!

I haven’t done this on my end yet, but are you looking to just cast the Quest to your TV so others could see around you? If so, you should just be able to do this via the app or headset (pending the TV comparability).

​@@lbsI'm looking to cast Xbox to Quest

Thanks for sharing your experience with both! I haven’t experienced the WV2 but always heard great things about it and why I was pumped to try the v3. Yes! I agree w/ remapping thumb stick buttons. Great tip! Appreciate you!

I’m on Xbox when playing. Best is to experience it in person. You have a good retailer near you that might have it on display or allows seamless returns? I know it’s more work, but worth it considering the investment (from all angles)

10000%

Appreciate you! 🙏🏾

It should pulsate a few times before going dark again when it is charged

@lbs yes, blinking yellow light a few times,you too？how to know about full charged status？

@vipervft when the battery indicator light is solid green for a few seconds. Or check the battery status icon when you’re connected to your Xbox.

@@lbs thank you very much

Do any controllers work with Synapse? I didn’t see any supported when I checked. But I’m newer to this ecosystem.

@@lbs no. its one of my biggest gripes besides dealing with their support lol

Nope. App is just to set up/program the controller

@@lbs appreciate the reply big dawg

@Neon_Jru3skiii appreciate the support and you checking the vid

@@lbs hey honestly having it at 2 for the sensitivity for the sticks is kinda perfect for me still really responsive I play apex on none and it’s so good

@Neon_Jru3skiii I feel you on that. I find it pretty responsive at those levels as well . Just would like to be as close to 0 as possible

They do feel natural even w a standard grip. Assuming you have bigger hands as well.

I have no idea why Razer markets them as "claw grip buttons", can actually someone who plays claw show the ideal grip for that? Because the position is perfect in the normal style grip without playing claw

I’ve yet to experience the v2, but if it satisfies everything for you, you probably shouldn’t upgrade. Only main difference I do know is the placement of the back buttons. Maybe some hands on experience will help.

if mechanical triggers, bumpers, and paddles are important to you this is definitely an upgrade. the te basically has all the bells and whistles the v3 pro has besides wireless for half the price. both v3 have all the features (minus gyro and touch pad) of the v2 pro plus the he sticks and triggers. i have the v2 chroma and the v2 pro. its night and day for me but the mechanical stuff is important to me. if you are happy with they way your v2 feels and its working fine i wouldnt bother upgrading until you need a new controller. after that: they are basically the same price and the v3 has a ton of improvements just no lights

It doesn’t for me. Im speaking to when its only connected via the hub

@lbs Oh I didn't catch the hub part. That's my bad. I just perked up when I heard it didn't power on the console and I was like wait, mine does lol Either way good video and review bud 👍

Yeah. I don't know why they made it so small. This is not how an Xbox controller should be 😢

Thanks for sharing your thoughts! I will definitely come back w more after I get some time with this thing. Great things to look into. Thanks!

I felt the same way regarding the handles. I also felt like the left thumb stick was slightly too close to the Dpad which made my hands cramp up even more. I ended up returning it

I have to agree I had to return my razer because the handles are so damn short, not to mention it's really uncomfortable to hold and the back buttons are so sensitive. I bought another Scuf because they are comfortable for me

I have small hands this might be my fit at last 😂

Great suggestions! I just fear swapping while trying to shoot w that setup personally. But could make swapping faster. The firmware was updated, but there is still a slight drift at 0 unfortunately.

@@lbs Yeah, I've been using that configuration since the first wolverine. And yeah that sucks, they really need to add a setting to calibrate.

Appreciate the feedback! Anything you having trouble seeing in particular?

@@lbs no nothing else !! great review thou I subscribed !! thumbs up

@RisingLazarus appreciate you and the support! 🙏🏾