Видео

Those settings didn’t work for my Houston acrylic 😢

Only problem I see, is since the camera can't be directly above where you're engraving you will get a fish eye effect. So it's not exactly accurate. Camera would need to be right on the gantry

Never had a problem with my WEN 3921. I think you need to learn how to properly install and tension the blade.

You are a GREAT teacher. Can you please show how to design it in photoshop? Thank you so much!!! Enjoying your tutorials 😊

Hey thanks for the demo! May I ask what brand/model of laser you use?

🌸🩷🌺

Operator error not the saws

might want to learn to use a tool before you review it

Great video. I have had my laser for 8 months. I need to install my camera

What do you typically charge for a bag tag?

I have a 3921 and the blade replacement is my main issue. I am going to try a well-placed light and see if that helps. I have yet to break a blade. I had the same amount of training you had (out of the box), and I like mine pretty well. I am sorry you have had so many problems.

No disrespect intended but that’s 100% pilot error. I’ve had the WEN for 3 years. Zero issues. Great scrolls can be cut with it. Was plug and play….🤷‍♂️

What is the new scroll saw you love? I have the wen and would really like to know what a good step up would be. Thanks.

This is a great video! Thank you!

I finally got my Thunder Bolt set up. I have so much to learn. My daughter and I are really interested in cutting acrylic. We will definitely follow along with this tutorial. Video's like yours are so much help! Thanks for sharing!

Nice Thank You!

I did everything step by step but my camera did not cut on once I was done. Where do I go to turn it on to see it on lightburn? Thank you!

At what point do you get to the tutorial? You can't create a tutorial if have a couple hours experience on a machine. Trying one craft project doesn't make you a teacher. The blades only break with age or tension. They are brand new, which means your dong it too fast or incorrectly. Edit your title and call this an UNBOXING.

I use the camera to help do the setup to cut up the offcuts into manageable pieces. Just do line cuts at the skinniest sections of the offcuts. Then keep the salvageable pieces in a bucket. Save space. Loves the camera.

Just want to ask what kind of foam are you using

❤

excellent video. what would you recommend for cut settings on 1/4 inch acrylic on a 100 watt thunder

Beautiful project! I’d love to recreate this, looks so much nicer than that standard pegboard. Only thing that could make this better is including some pricing as well. Thanks 🙏🏼

I just found your channel tonight after looking for laser stamp tutorials. I was diagnosed with lupus in 2011. It does suck trying to manage the disease. Hope you’re doing well.

I searched your video playlist and didn't find a follow-up on ' the scroll saw the you really like '. What is it?

Corina, I absolutely love this video. Love the detail that you go into especially the layer settings for your Thunder. I just made a prototype with your settings and worked great. I'm making a set for my son-in-law who coaches grandson's team. I'm going to make up a flyer to see if we can get other coaches interested in purchasing. Could you indicate about how much you sell them for? I know it depends on cost of materials and where you live, but if I could get a ball park figure. Thank you.

Hi first of all thank you so much. I have a question my laser name module head 40Watt for diode laser machine. Does the library file work with my laser, Or i have to make a new library ??

Thanks for the video. Where do you buy the thin foam that goes between the wood and the rubber?

I love my WEN scroll saw and have had zero issues. Sounds like alot of your complaints are user error im afraid. Ive had quite a few scroll saws in my 30+ years of woodworking and this IS a decent saw. Ashame you "missed" the footage of you actually scrolling so we could critique and give pointers on your technique

What is the brown masking paper called?

Thank you for sharing!

Can any model of Ruida motherboard be connected to a camera?

Hey, would you mind sharing your settings?

I have always been a great fan of Thunderlaser's great machine design and engineering quality along with their many videos as they attempt to make laser cutting easy for the masses. The matrix test card is a great beginners tool to get you working but it is like training wheels on a bicycle, once you understand how to balance, you remove the trainng aids. If you look at the small details of this test matrix you wil hopefully ask yourself several questions: 1) With the cutting test, once the pieces drop out you lose a lot of valuable observational data. However, look closely at the 25mm/s cut speed and note how "smokey" they are in relation to the 5mm/s cut line. Why? Its the same lens, the same focal distance and the same powers. 2)Compare the width of cut (the kerf) between the 25mm/s cut and the 5mm/s cut. Why is the 5mm/s cut twice as wide when its the same lens, the same focal distance and the same power? 3)With the engraving test, I have always been perpexed at what it shows you. It seems to show that as you increase power the colour gets darker. This is a fallacy because if it were true the colour would get darker ON THE SURFACE. Look closer and you will observe that increasing the power is making the engraving deeper and smokier. Again you should ask yourself why this is happening? How useful would this be on thin card? 4)The width of the burnt laser engraving line changes with speed and power. There is no compensation of line spacing in these tests. Slower speeds and greater power means thicker lines and double burning as lines overlap. 5)Focal distance set to the manufacturer's OPTICAL specification rarely gives optimal cutting or engraving performance because your laser beam has an INTENSITY focus that changes with speed, power, material and position on the table. So.these test patterns need to be done at different focal distances to find optimum performance chracteristics. If you never observe these issues, ask questions as to why and look for answers, then you will for ever be stuck with your training wheels. Great as Thunderlaser are they do not really understand the technology they sell beyond skin deep. To extract the best performance from your machine there is so much more to understand. Please watch this video to see how misleading the test matrix can be. ruclips.net/video/Na5_6okUyKg/видео.html This may whet your appitite to understand more about the technology you have invested in. It is truly amazing and your TL machine can do much more than TL ever imagined.

Great looking sign!

Beautiful sign!! I purchased the same Wen Scroll Saw, I had the same issues as you... The only difference is, my saw is sitting in the corner of my shop collecting dust. I am not sure if I will ever use it again.. HA HA HA

That is such a great idea to use the ring to organize your cut cards.. Thanks!!

Thank you so much! I just got my thunder and my brain is mush from all the info and just trying to get started. Following and subscribed 💖

Wasn't enough they get the vote, allowed to drive, now this. Women with Lasers

Interesting method! If you didn't already have a thunder machine, would you opt for a 3D printer and use pla filament instead? I'm a newbie and was wondering what machine would be most time efficient and cost effective in the long-term when making 3D keychains. Thanks!

What about focusing. Also did you not have to print out the circle calibration card. Not just the targets

Looking forward to installing mine. New Thunder owner.

So, i am waiting on my 51/130 to arrive. Good video.

Sorry, can see others trying to figure out that "duplicate" section. I'm really struggling with this. I'm trying to watch what you're doing and process what you're saying. It just don't make any sense... It looks as though you're making a frame and then pressing duplicate!? Still don't show up as an inverted layer for me to preview how the stamp is going to look...

You are amazing! I have wanted to do this for my laser and couldn't figure it out until watching your video! Great explanation and I appreciate you!

Does your neighbors complain about the smell?

Where are the links to the items?? I see all the links for your camera/electronic equipment but not the pantry items

would love to know where you get your acrylic? Thank you

When I click duplicate it does not invert. What am I missing?

What adhesive is that? Wondering if it’s more cost effective than 3m. Thank you for sharing your settings. I always have issues with that lol