Geossotech Ltd
Geossotech Ltd
  • Видео 104
  • Просмотров 143 873
GNSS TUTORIAL - HOW TO LOG STATIC DATA IN RINEX FORMAT DIRECTLY
You can log static data directly in RINEX format using your Survey Master application. This tutorial will show you how. RINEX(Receiver Independent Exchange Format) data format is good when you are working with different brands of GNSS receivers.
Просмотров: 205

Видео

GNSS TUTORIAL - HOW TO USE P6H RTK TABLET AS HANDHELD GPS
Просмотров 199Месяц назад
We will show you how to use the P6H to pick coordinates without connecting to a COR station or PPP service. It will work like a conventional handheld GPS.
GNSS TUTORIAL - HOW TO USE THE COMNAV SINOGNSS P6H IN PRECISE POINT POSITIONING MODE(PPP).
Просмотров 355Месяц назад
This video shows you how to use the P6H RTK tablet in Precise Point Positioning mode. In this mode, the P6H can get an accuracy of up to 10-40 cm without connecting to any base receiver or COR station. PPP only works properly on Survey Master 3.5.0 and K8 board with 1.4.5 firmware and above. You can use Galileo HAS(High Accuracy Service) or Beidou B2b corrections or you can use them both. We no...
LASER TUTORIAL - HOW TO USE A LINE LASER FOR SETTING OUT HORIZONTAL AND VERTICAL LINES
Просмотров 135Месяц назад
How to use low-cost line laser equipment to set out horizontal and vertical lines. It is very helpful for professionals in the construction industry
GNSS TUTORIAL - HOW TO USE THE COMNAV SINOGSS P6H FOR RTK CADASTRAL AND DETAIL SURVEY
Просмотров 4102 месяца назад
The P6H tablet is a high-accuracy RTK tablet and it is ideal for GIS data acquisition. However, when mounted on a pole and connected to a COR station, it can also be used for surveys that require higher accuracy such as property and detail surveys. This video shows you how.
GNSS TUTORIAL- INTRO INTO COMNAV SINOGNSS PGH RTK TABLET
Просмотров 1442 месяца назад
We introduce the P6 High Accuracy Table from ComNav Technology. It is a game changer. It works perfectly with CORS and in open areas, it gives the same accuracy as high-grade GNSS devices. It can also work in stand-alone mode as a handheld GPS device.
GNSS TUTORIAL - HOW TO CALCULATE CUT AND FILL FOR EARTHWORK
Просмотров 2493 месяца назад
In this tutorial, we show you how to create a surface and calculate cut and fill volume.
GNSS TUTORIAL - VOLUME CALCULATION USING SURVEY MASTER AND ANY COMNAV SINOGNSS RECEIVER
Просмотров 4213 месяца назад
In this video, we will show you how to calculate sand or stockpile volume using Survey Master android application paired with your SinoGNSS receiver
GNSS TUTORIAL -HOW TO MEASURE THE HEIGHT OF A BUILDING USING SINOGNSS MARS PRO RTK
Просмотров 4866 месяцев назад
In this short tutorial, we show you how the laser feature of the SinoGNSS Mars Pro receiver can be easily used to measure the height of a building. This a very important feature and a game changer as it helps you take measurements remotely. This method can be used to measure the height of other types of structures as well.
GNSS TUTORIAL - HOW TO USE YOUR SURVEY MASTER TO GET COORDINATES LIKE A HANDHELD GPS APP
Просмотров 4396 месяцев назад
In this tutorial, we will show you how to get coordinates with your Survey Master application without connecting to any receiver. Survey Master will use the GPS in your phone or controller.
GNSS TUTORIAL - TRANSFER YOUR DATA DIRECTLY TO FLASH DRIVE
Просмотров 1388 месяцев назад
GNSS TUTORIAL - TRANSFER YOUR DATA DIRECTLY TO FLASH DRIVE
GNSS TUTORIAL - SURVEY MASTER STANDING SURVEY FEATURE
Просмотров 3338 месяцев назад
GNSS TUTORIAL - SURVEY MASTER STANDING SURVEY FEATURE
GNSS TUTORIAL - HOW TO CONVERT STATIC SURVEY CNB FILE TO RINEX FILE
Просмотров 1,1 тыс.8 месяцев назад
GNSS TUTORIAL - HOW TO CONVERT STATIC SURVEY CNB FILE TO RINEX FILE
GNSS TUTORIAL - EXPLORING THE ACCURACY OF COMNAV SINOGNSS VENUS LASER RTK
Просмотров 7799 месяцев назад
GNSS TUTORIAL - EXPLORING THE ACCURACY OF COMNAV SINOGNSS VENUS LASER RTK
GNSS TUTORIAL - COMNAV SINOGNSS MARS PRO LASER RTK ACCURACY TEST
Просмотров 1,1 тыс.9 месяцев назад
GNSS TUTORIAL - COMNAV SINOGNSS MARS PRO LASER RTK ACCURACY TEST
GNSS TUTORIAL - INTRO TO COMNAV SINOGNSS N2 RECEIVER
Просмотров 1,2 тыс.10 месяцев назад
GNSS TUTORIAL - INTRO TO COMNAV SINOGNSS N2 RECEIVER
GNSS TUTORIAL - SETTING UP YOUR COMNAV SINOGNSS MARS PRO RECEIVER
Просмотров 1,6 тыс.10 месяцев назад
GNSS TUTORIAL - SETTING UP YOUR COMNAV SINOGNSS MARS PRO RECEIVER
GNSS TUTORIAL - MARS LASER PRO RTK RECEIVER INTRO
Просмотров 2,6 тыс.10 месяцев назад
GNSS TUTORIAL - MARS LASER PRO RTK RECEIVER INTRO
GNSS TUTORIAL - VENUS RTK LASER SETUP
Просмотров 93011 месяцев назад
GNSS TUTORIAL - VENUS RTK LASER SETUP
GNSS TUTORIAL - INTRODUCTION TO VENUS LASER RTK FROM COMNAV TECHNOLOGY
Просмотров 25811 месяцев назад
GNSS TUTORIAL - INTRODUCTION TO VENUS LASER RTK FROM COMNAV TECHNOLOGY
Mars Laser RTK
Просмотров 123Год назад
Mars Laser RTK
TOTAL STATION TUTORIAL- Surveying with COMNAV C200 using ANGLE AND DISTANCE METHOD
Просмотров 487Год назад
TOTAL STATION TUTORIAL- Surveying with COMNAV C200 using ANGLE AND DISTANCE METHOD
TOTAL STATION TUTORIAL- COMNAV C200 COORDINATE METHOD
Просмотров 638Год назад
TOTAL STATION TUTORIAL- COMNAV C200 COORDINATE METHOD
TOTAL STATION TUTORIAL- HOW TO SET OUT POINTS WITH COMNAV C200 TOTAL STATION
Просмотров 717Год назад
TOTAL STATION TUTORIAL- HOW TO SET OUT POINTS WITH COMNAV C200 TOTAL STATION
TOTAL STATION TUTORIAL - RESECTION WITH COMNAV C200 TOTAL STATION
Просмотров 274Год назад
TOTAL STATION TUTORIAL - RESECTION WITH COMNAV C200 TOTAL STATION
TOTAL STATION TUTORIAL - HOW TO IMPORT COORDINATE FILE INTO COMNAV C200 TOTAL STATION
Просмотров 338Год назад
TOTAL STATION TUTORIAL - HOW TO IMPORT COORDINATE FILE INTO COMNAV C200 TOTAL STATION
TOTAL STATION TUTORIAL- HOW TO EXPORT DATA FROM YOUR COMNAV C200 TOTAL STATION
Просмотров 359Год назад
TOTAL STATION TUTORIAL- HOW TO EXPORT DATA FROM YOUR COMNAV C200 TOTAL STATION
GNSS TUTORIAL - HOW TO CHARGE YOUR BATTERIES WITHOUT CHARGER
Просмотров 548Год назад
GNSS TUTORIAL - HOW TO CHARGE YOUR BATTERIES WITHOUT CHARGER
WHY YOU SHOULD GET YOUR OWN SINOGNSS RECEIVERS NOW
Просмотров 617Год назад
WHY YOU SHOULD GET YOUR OWN SINOGNSS RECEIVERS NOW
GNSS TUTORIAL - SINOGNSS T300+ TILT COMPENSATION ACCURACY
Просмотров 1,4 тыс.Год назад
GNSS TUTORIAL - SINOGNSS T300 TILT COMPENSATION ACCURACY

Комментарии

  • @olzbayarlutbayar5238
    @olzbayarlutbayar5238 3 дня назад

    Thanks a lot. Good luck

  • @Manan-y9w
    @Manan-y9w 10 дней назад

    Hello sir how can I contact with you.

  • @Manan-y9w
    @Manan-y9w 10 дней назад

    Nice

  • @mohammedhussen2443
    @mohammedhussen2443 10 дней назад

    This total station asked me pasward. Let me fill it with hate

  • @normal4711
    @normal4711 14 дней назад

    Thank you, your videos have been helpful

  • @normal4711
    @normal4711 16 дней назад

    Thank you for sharing your knowledge

  • @lesterlopezaleman
    @lesterlopezaleman 21 день назад

    Hello friends, can you make a video about how to stake out a point?

  • @lazarousbwambale7514
    @lazarousbwambale7514 25 дней назад

    This was very helpful

  • @GaudenCalonia
    @GaudenCalonia 28 дней назад

    Puwde tagalog

  • @UshieThomas-kd9kv
    @UshieThomas-kd9kv Месяц назад

    Please make a full video on how to proceed static data from the beginning to the final stages thanks in advance

  • @youssoufcoulibaly6243
    @youssoufcoulibaly6243 Месяц назад

    bonjour, maître j'ai un problème de mon l'appareil UFO 3Plus quand j'ai connecté la Base à la lienzon il sa fiche deux types seulement Radio Externe , Radio internet, l'autres sont masque s'il vous plaît aidez moi résoudre le problème

    • @geossotech
      @geossotech Месяц назад

      UFO 3Plus ? De quel appareil s'agit-il ?

  • @UshieThomas-kd9kv
    @UshieThomas-kd9kv Месяц назад

    Great ❤

  • @kwandumakayi8784
    @kwandumakayi8784 2 месяца назад

    I accidentally swapped the external battery (car battery) terminals and tried to switch on the external radio. Does it immediately damage the radio?

    • @geossotech
      @geossotech Месяц назад

      Please do not make that mistake again. Red goes to the positive terminal. Red is positive(RIP). Black goes to the negative terminal.

  • @mennabababah76
    @mennabababah76 2 месяца назад

    Your receiver is saying internal radio mode

  • @geossotech
    @geossotech 2 месяца назад

    This is very educative

  • @ezeugochristo1174
    @ezeugochristo1174 2 месяца назад

    Please what kind of Rover is that

    • @geossotech
      @geossotech 2 месяца назад

      It is a network rover. It can give 8mm-1 cm accuracy when connected to a COR station. It can give less 1m accuracy when working as a stand-alone GPS

    • @faruqshamsideen1247
      @faruqshamsideen1247 2 месяца назад

      @@geossotech can I please get your number sir ?

    • @geossotech
      @geossotech 25 дней назад

      ​@@faruqshamsideen1247Good afternoon sir ,you can contact us via WhatsApp on 07061769934

  • @rodolfoeduardomittersteine249
    @rodolfoeduardomittersteine249 3 месяца назад

    can you tested under big trees? regards bro

  • @atebapaul
    @atebapaul 3 месяца назад

    Thank you🙏 Please, can you reduce the music volume while recording the video?

    • @geossotech
      @geossotech 2 месяца назад

      Okay.Thank you for the feedback

  • @lesterlopezaleman
    @lesterlopezaleman 3 месяца назад

    Hello my friends, Where i can get the user manual for this total station ts c200?

    • @geossotech
      @geossotech 2 месяца назад

      No detailed user manual yet. If you have something you want to learn you can let us know and we will make a video

  • @iulianstefan9005
    @iulianstefan9005 3 месяца назад

    Hello, I cannot connect the antenna to the controller wirelessly. Do you have a suggestion? Thank you.

    • @geossotech
      @geossotech 2 месяца назад

      Connect through bluetooth

  • @grp77
    @grp77 4 месяца назад

    hi, can I CHANGE A ESRI GDB's procection permanently?

  • @diatmikakade6514
    @diatmikakade6514 4 месяца назад

    hello when i choose fw update but there is notice "cant upgrade in current mode" how to solve that?

    • @geossotech
      @geossotech 2 месяца назад

      Maybe you need disconnect from your work mode. Dont perform any other operation while doing firmware update

  • @henryolimini3926
    @henryolimini3926 4 месяца назад

    How much for it

    • @geossotech
      @geossotech 2 месяца назад

      You can check our website or instagram for our contact information

  • @weltonsilvacardoso1967
    @weltonsilvacardoso1967 5 месяцев назад

    Where did you get the firmware file?

    • @geossotech
      @geossotech 2 месяца назад

      You can ask your ComNav local partner who you bought the equipment from

  • @gorandiaye50
    @gorandiaye50 5 месяцев назад

    Thank you brother for your excellent video.

  • @WilfriedUlrichStephaneDion
    @WilfriedUlrichStephaneDion 5 месяцев назад

    I am in Ivory Coast. How can I get it please?

    • @geossotech
      @geossotech 2 месяца назад

      You can check our website for our contact information

  • @WilfriedUlrichStephaneDion
    @WilfriedUlrichStephaneDion 5 месяцев назад

    The price please

    • @geossotech
      @geossotech 25 дней назад

      Good afternoon, for prices of our equipment you can contact us via WhatsApp on 07061769934

  • @WilfriedUlrichStephaneDion
    @WilfriedUlrichStephaneDion 5 месяцев назад

    do you sell comnav devices? the Mars laser rtk?

    • @geossotech
      @geossotech 2 месяца назад

      Yes. You can check our website or instagram for our contact information

  • @elvisbwalya6057
    @elvisbwalya6057 5 месяцев назад

    good work man your videos are nice and educational

  • @israelortega5869
    @israelortega5869 5 месяцев назад

    Excellent video very well explained

  • @paigebriggs3147
    @paigebriggs3147 5 месяцев назад

    How do I inbox you

  • @paigebriggs3147
    @paigebriggs3147 5 месяцев назад

    Good evening boss. How do I chat or call you privately?

    • @geossotech
      @geossotech 2 месяца назад

      You can check our website for our contact information

  • @advika2921
    @advika2921 5 месяцев назад

    Lpe6 batteries only 2:30hr working in base station. Very irritating 😢

    • @geossotech
      @geossotech 24 дня назад

      Our SinoGNSS receivers have batteries that works for 2 days without charging.

  • @advika2921
    @advika2921 5 месяцев назад

    I tried this power connection to my T300dgps. But Base was continuously restarting. No one supporting to my problem.

    • @geossotech
      @geossotech 2 месяца назад

      Maybe you need to change your power source

  • @MrAlexisIbarra
    @MrAlexisIbarra 6 месяцев назад

    Hi sir, where I would get this software?

    • @geossotech
      @geossotech 25 дней назад

      Good Afternoon sir, The software comes with the SinoGNSS flash drive when buying the receiver, it can also be gotten from the SinoGNSS website. You can also Dm us so we would send it to you free of charge.

    • @jonathanacostamatos5216
      @jonathanacostamatos5216 23 дня назад

      @@geossotechI’m interested too

  • @reyargieninom.4096
    @reyargieninom.4096 6 месяцев назад

    Waiting for actual performance review on how much time it will fix from float with heavy canopy

  • @mosessukari711
    @mosessukari711 6 месяцев назад

    Nice

  • @appalanaiduchitikela1827
    @appalanaiduchitikela1827 6 месяцев назад

    Howmuch coast

    • @geossotech
      @geossotech 25 дней назад

      Good afternoon, for prices of our equipment you can contact us via WhatsApp on 07061769934

  • @jasvindersingh318
    @jasvindersingh318 6 месяцев назад

    how i will get corner location point with this tilt ?

  • @noobkin997
    @noobkin997 6 месяцев назад

    You need to turn the music down, I can’t hear what you’re saying

  • @naeemalsaleh9215
    @naeemalsaleh9215 7 месяцев назад

    where can I download the COM E software sir?? can you share it if possible? thank you in advance

  • @refkenniefx1385
    @refkenniefx1385 7 месяцев назад

    the video isnt clear

  • @emmanuelgodfrey9013
    @emmanuelgodfrey9013 7 месяцев назад

    Inputting of data into the instrument

  • @emmanuelgodfrey9013
    @emmanuelgodfrey9013 7 месяцев назад

    Great job Sir, please kindly do video on sitting out and imputing of Data

  • @AbsoultMMA2
    @AbsoultMMA2 7 месяцев назад

    Any ideia when the c.r.u crash using t300 CNB base file?

    • @geossotech
      @geossotech 7 месяцев назад

      What version of CRU are you using?

  • @quidproquo4510
    @quidproquo4510 8 месяцев назад

    Well done

  • @reyargieninom.4096
    @reyargieninom.4096 8 месяцев назад

    Can you try it in the woods with dense canopy? Thanksss

    • @geossotech
      @geossotech 24 дня назад

      There are receivers that can have stable fix under canopy, also it depends on the type and thicknesses of the canopy cover. But yes you can use SinoGNSS N series receivers under canopy

  • @jmonk2011
    @jmonk2011 9 месяцев назад

    Great tutorial video, thanks for making this demo and explaining how to add in a boundary shape.

    • @geossotech
      @geossotech 8 месяцев назад

      You're very welcome!

  • @bhushanhire9400
    @bhushanhire9400 9 месяцев назад

    No Bass conect....?

    • @geossotech
      @geossotech 25 дней назад

      The video illustration was for connecting to a COR Station. But the same process can be applied to connecting to a Base.

  • @amarmaheta9031
    @amarmaheta9031 9 месяцев назад

    it is nice and useful video as i m dealing and operating eSurvey DGPS in India.but total station i have just started so kindly upload any video about how to stake out of already stored points in a particular job(means i dont want to add and stakeout) it is already in any job no 1 or 2 or 3 for example how i can select co-ordinate from a running list and do stake out in eSurvey E3 Model and if i want to check list of co-ordinate which i measured and stored in any JOB,i tried but couldnt find that option.if you know and can help kindly let me know.if any video u have made pls share link.Thank you.

    • @geossotech
      @geossotech 24 дня назад

      So sorry we no longer have the E3 total station but there should be a place where you select from the coordinate data already on your current job to stake out