Видео

Yes sure. You will need 10 pulleys

Coming

@@atletica1885When?

Got it and will do

No only 50mm

Hello, the model in the video is 180 cm tall, so you should have no issues using the Fullbody Multitrainer.

Hi, gerne in unserem Brand Store in Mainz

@@atletica1885 Komme aus Bremen :(

Yep geht.

Yep melde dich beim Kundenservice

Ja, Kunststoffrollen. Sehr ähnliche, wie die Kundstoffrollen von Technogym, Matrix sowie Gym80 in Studios Anwendung finden.

Nein ich habe eine normale Stange und klein löcherige Gewichtsscheiben. Es gibt aber einen Adapter dazu,so dass du auf groß löchrige umsteigen kannst! LG

@@kivanc19o7 Danke

@@kivanc19o7 Welche Stange nutzt du? Nehme an mit 30mm? Wie lange ist die Stange und wie legst du diese auf die J-Hooks? Hast du den R5 Cage oder größer?

Yep

hello have you found reviews ? I am also thinking about this, or the Powertec or the ATX... this one seems the most sturdy but no reviews and no other videos than the 2 from @Atletica !

@@kalanyeadamantium4603 No, not yet. Very mysterious :D

@@rollo69222 thanks for the reply :) I ordered one, I will see myself hoping it's not a scam :D

The RAPT Leverage from BRUTEforce Australia uses the exact same frame. There are more videos on that one. No reviews yet though...

I have the Rapt frame since 3years and what I can say about it is: The UPS: - The Versatility of the Machine - Possibility to work with one arm or both - The way you can use the safety bar to not being crush by it if you fail an exercice like squat/bench press - The possibility to change and updgrade your ways to work on it (like on the powertech too, go watch hacks on it on youtube on the powertech but works for this too) (For exemple I use daisy chains attached to the arms to transform any exercice into a convergent exercice) - double pulleys not adjustables but that's not a problem when you know how to train properly - 500lbs for the arms capacity and 400 if I'm correct for pulleys wich IS for both really enough - 4 racks storage for weighs mounted on it (so you wont let your weights lay on the ground or buy a weight rack at the beggining) - The Price for all the exercice you can do on it - Simple to mount (I did it alone but I recomend to ask someone for help for the mounting on the arms while screwing them to the frame) - Like it has been said the Hook to start the squat up, there is two positions - The pads to keep you sit on your bench while doing cable pull ups - The possibility to do bodyweight exercice on it like pull ups and dips using the arms (The machine isn't completely still but it doesn't wooble that much but of course it will depends on your weight and if you put some plates on the storage racks of the machine that could lead to make it more stable - The space you need for the machine, I have it in my bedroom so that's a big plus - The différents grips for pull ups / chin ups The Downs : -The grips for chin ups pull ups are a little bit to Close to the machine but you can use the arms on the highest position - for cable rowing a foot plate would be perfect (I'm putting my feet on the pads) - the attachment system to connect both arms with the bar like to do squat is good but you have to screw both sides to secure it unlike the powertech where you screw just one side and the other is automatically closed by a sping system - If there was numbers on the différents holes to adjust the arms it would be great too (even if you can put stickers on it by yourself) - If you're using the bottom pulley and if you are too close to the machine you'll have to be careful to not rub the cable of the pulley against the pads (I'm putting it up sometimes) - same problem if you're working with the bottom pulley at ground level like for rear sloulder (read delavier and Michael gundill Book) The cable can rub againt the edge of the hole of the frame of the machine so careful too, I put a concave piece of plastic in the hole that goes out so the cable slides on it) - I have a little problem on the brute force rapt frame, with the bolts that connect the bottom and the upper part of the frame of the machine, there is too much Space on the holes of the bolts so I had to untight them move a little bit the arms for them to be symetrical to the frame of the machine, but this frame made in Germany seems to be better for this point, I'd buy theirs and not brute force if it was to remake In the End: Does that machine is good? Yes it is a great machine Do I recomend it? Of course i'd buy that again if I'd have nothing yet I'd recomend you to put floor mats of 1.18 inch (3 centimenter) if you put the machine in an appartement

diese Frage wollte ich auch gerade stellen 😀

Hi, yes, this is the 200cm power rack. The athlete is 183cm tall.

No

Yes they are.

It's not specified in the description on your website and not showed in any picture or video

Yes, you remove the chrome connector bar. It also has the unique top lockout mechanism to allow squats to start ‘from the top’

Danke für dein Feedback Christoph 🤝

Danke dir 👍🏻

Hi, vielen Dank für deine Anfrage. Die R8 Bradley Kabelzug Station wird voraussichtlich ab dem 20.05.24 wieder vorrätig sein. LG

Schau auf unserer Webseite mal nach dem X10. Ist das Nachfolge Modell 👍🏻

Die R7 und R8 Spotter Arme passen nur das an dazu passende Rack.

Das freut uns 🤝

Danke dir für dein Feedback!

Richtig gute Idee 👍

Wird weitergeben und in Zukunft folgen 👍🏻

So ein Feedback freut uns sehr, danke dir 🤝

Hy, hast du dieses Gerät? LG

If you're referring to the cable on the lat tower it's steel coated with plastic.

Ich habe die längsten Schrauben genommen und darauf geachtet, die Seite der Metallstangen nach oben zu setzen, auf der die kleine Metallplatte aufsitzt. Damit kann man die Muffen fixieren, indem man die Schrauben so festzieht, dass sie auf der Metallplatte aufliegen. Am besten dann jeweils eine Mutter so ziehen, dass nicht mehr wackelt. Dann bewegt sich da nichts mehr. Leider ist die Anleitung da nicht wirklich hilfreich.