Видео

🤣🤣🤣

Thanx ;)

Merci à toi 👍

Şükrü Korkmaz thanks! Gopro session 5

@@lehussardfpv thanks...

Yes je te fais ça quand je le brancherai sur beta ;)

Merci :)

Eric Robinson Hi, thanks, the music is « in the house » , « in a heartbeat » (from 28 days later soundtrack)

Loved this one, nice for cruising mid range, and easy to tune . Now i fly with the iFlight HL7.

@@lehussardfpv could you add specification for your HL7??

@@matismatis-jy2ny HL7, brotherhobby avenger 2507 1850kv, F4 flame AIO, esc metal F3 80A, runcam rotorriot 2, tbs unify pro hv, crossfire nano rx, battery tattu 5s 1800mah, props HQprop 7x35x3

Hello Aaron. Sorry but i cant send you the PID's because both of my 7 inch are running a Helio Spring... and as you know there's no PId with helio spring... only Q filtering thrust... all my (yaw roll and pitch) are on 2600. Soon i'll try on the HL7 betaflight, then i'll send you my PID's 😉

My best flight with 5s 1800mah, Hqprop 7x35x3 and smooth flying = 10-12 minutes With 4s 2300mah infinity 8min.

@@lehussardfpv why don't use 300 mw 1.2 ghz or 2.4 ghz ? these frequencies are very efficient in video !

Şükrü Korkmaz yes i know, but not so easy to integrate it in my fatsharks?

@@lehussardfpv the video receiver and its antenna to the flight glasses or you can connect to the flight screen. look this is my flight video ruclips.net/video/Xi03mV-_GcI/видео.html

Thanks, Nothing changed, all stock settings!

That's The beta 85x HD with the stock caddx turtle v2 cam ;)

4S.... 😇

Le Hussard FPV meant mah, trying to find the weight sweet spot.

4s tattu long size 450mah

@@lehussardfpv thanks!

Achète donc un cinewhoop et viens !

@@lehussardfpv ça me tente bien 😊

Next time i'll try the ND8 and ND16 filters

Merci! Oui un bien bel endroit avec des arbres magnifiques.

Je l'aime trop ce 85x 😍

yes i used the 75x tuning video and lowered the P for 4s because of full throttle oscillations

No Dont worry he is a friend!! Yes im still running these motors i love them. I use them with 4s 2200mah infinity and 5s 1800 tattu.

Stock props, but tuned PID's (lowered the P because full throttle vibrations with 4s)

Le Hussard FPV thanks!!!!

Flight time up to 12 min with 5s 1800mah and hqprop 7x3.5x3 and with smooth flight But it can reach only 3 mins with dalprop 7x5.6x3 and full throttle...!!

Hi! To solve the vibrations issues, you have to balance your props precisely. Dont use 2 blades props, but 3 blades props (like HQprop 7x35x3). Check the tracking of your props too, they have to move exactly in the same plan.And to eliminate all vibrations, i use the stabilisation of the gopro hero 5 ;)

What size motors are you using? My first 7 inch was with 2306 motors and I had vibes no matter what.. you need a more stout motor with a bigger stator volume to spool up a large disk load like that... switch to some BBBHOBBY 2407's or some Avenger V2 2507's and itll be smooth as your 5 inch

Yan Dachs thanks! :)

Le Hussard FPV Il est situé ou? Je recherche un club pas trop loin de chez moi

jojo grisy suisnes près de Coubert

Le Hussard FPV J'ai trouvé une adresse c bien sa?

jojo non non, rue du bois du parc, 77166 Grisy-Suisnes. Nous organisons un concours voltige si tu veux passer ce week end!

Le Hussard FPV Haaa ok sa me fait 33km de chez moi. Je pensais que vous étiez plus près. Je recherche un club pas trop loin de chez moi. En ce moment je fais 46km pour aller au terrain de vol. Je serais bien passé vous voir ce week-end mais je travail.

Steven Smith hi, no i didnt test it more than this video... the module fried with a 3s external lipo. and thats the 2nd who burned with the external power... on the manual is written : external power: 4v-12,6v.....so enough with that, i’ve buyed the crossfire!!

@@lehussardfpv frsky says that you should be careful with a 3s lipo because it can be more than 12.6v. They give an advice use only 2s lipo dude :)

@@dmitriyp7701 you're right.... but since i leaved for Tbs Csrf ;)

Charles Lamoureux sorry, but i never saw this issue...

No problem, no one else has seen it either ...I’m thinking likely bad receiver

And what lipo and props? Thanks.

On these videos it was the hawkeye firefly q6 from banggood. Now i broke it and buyed the runcam3.

Lipos: Dinogy Graphene ultra v2.0 1300mah 80c and tattu race series 95C Props: Rcaerstar 5x4.8x3 and kingkong 5x4.5x3 ;)