Видео

I'm not sure I understand your Question, but if you are asking about the EQ and Cue Points, It is on the Top portion if your Rekordbox Window, look to the right and the symbol looks like a EQ Sliders. Click it and it will show you the EQ and Sliders. As for Cue points they are added buy hitting the Pad at the Desired point (time). Thank you For your Question but I might suggest Looking at Chris M www.youtube.com/@ReallyChrisM he does a lot of Rekordbox Videos

I did not weigh it but I would say that the case is about 35 - 40lbs w/o Controller. (EMPTY). I usually use a cart to haul, as it can be quite bulky. It is easily handled using the Carrying handles and I have no trouble lifting it in my SUV. I still using this case and I used it for my DJ Podium Build. See my other Video about DJ Podium for Flight Case. Thanks for watching.

It cant be 35 to 40. The case is low profile. There is not much room underneath the case to store things. a Case that has more room underneath weighs more like 35 to 43 lbs. If i were to guess, This case has to be around 29 thru 32 lbs.

@@DJCalienteNYC the actual weight is 35.2lbs I weighed it on my scale

Bought on amazon here is the info: Laptop Stand for Desk, Ergonomic Aluminum Laptop Stand Adjustable Height from 7-15", Sitting and Standing Laptop Riser for 10-17" Notebook (Black) Made by VECOFO cost was $29.91 USD. Good luck my Friend

@@djazh2o Thanks

So go visit him and lend a helping hand instead

Bought on amazon here is the info: Laptop Stand for Desk, Ergonomic Aluminum Laptop Stand Adjustable Height from 7-15", Sitting and Standing Laptop Riser for 10-17" Notebook (Black) Made by VECOFO cost was $29.91 USD. The 2nd Laptop Stand I made see my other video on how to make it. Thanks for watching.

See this video for Laptop Stand: ruclips.net/video/V5qR4PEff3c/видео.html

I did not use any type of blueprint. I just designed it from something I drew up on paper. But I will try and send you more information on the dimensions I use. I hope that will help you.

Sir..here is the Link from Amazon: a.co/d/8gRbXxa

Thank You

No I just put them in my SUV separately.

I just built this for myself. Although it Looks hard, it is very simple and Only used a few tools. When I build my next one I will try to Video it to show how I put it together. But thank you for your comment.

When I used it for the First time it was great and a easy setup.

Thank you. I've used these for several projects and builds

I was thinking, you could make swappable cutout tops for different controllers rather than have multiple podiums.

Cool but controller are in to different places

@biggecaps the custom swappable top would be cut for the shape of the specific controlker. And perhaps inside have lareger velcro areas to accommodate the possible locations of different controllers'feet.

I think your idea is awesome. It would be great to have a high resolution screen to see things more clear

You say this, but I bet he STILL gets people that ask if he is the DJ.

Did you used a router at all or any special tools besides the pocket hole tool ? I’m pretty new at wood working 🤦‍♂️

I only used a Table saw, a Miter Saw and Drill and Pocket Hole Jig (Kreg). I had some of the wood cut to length at my local Hardware (Home Depot) Store.

here is the Link a.co/d/8patNKY I hope you find it...works great.

@djazh2o Thank you sir much appreciated

Thank you.

From my understanding using a DMX controller you would address them the same as any other light,. Just use the DMX settings from the Manual. DMX Control is correct from what I see in the manual. As for Master/Slave using these Lights you will make the First Light Master and set the others to a corresponding address. I Set ALL mine as D001 because I use that address for all my par lights is a RB_DMX 1for rekordbox. Also I use the First light in a series and set all other to D001. So if using the remote when the first light changes so do the rest. As for a Specific Light for a Specific address each light has to have its own Address D001 for light 1, the D008 #2 and D015 #3 as the light is 7 channel light. Then each light will be controlled from a different channel.

I'm using the AC 222. I found it on RUclips.

Again I meant to Say Behringer UCA 222 (red).

I use the behringer AC222. I found it to be easiest but there are other that do the same thing. The 2nd set of rca cable are going out to my speakers, this way i can hear what is coming out.

I meant to say that I use Behringer UCA 222 (Red). Behringer U-Control UCA222 USB Audio Interface. www.amazon.com/Behringer-U-Control-UCA222-Ultra-Low-Interface/dp/B0023BYDHK/ref=sr_1_1?crid=142CLJQZT7WD9&keywords=UCA+222+Controller&qid=1693950821&sprefix=uca+222+controller%2Caps%2C135&sr=8-1

My pleasure. Be Well Be safe - and let the music play on.☺

If you plug you phone directly into anyone of the 4 channels via RCA input you can play directly from you music files or from a other source. I use Amazon unlimited (a paid subscription).

Let me add that if you are using a DJ app such as a small mixer, yes that will work as well, The idea is to use the phone or tablet Audio output from your device thru your DDJ 1000. Thar is all you are doing. Audio out from device to DDJ 1000 and out from your controller to you Audio out ( Speakers).

Awesome, thank you for the input. Can't wait to try it out.

​@@djazh2oCan you download and keep the Amazon music or is it copy protected like iTunes? Amazon Unlimited sounds cool. I have CDs i ripped in iTunes, that i haven't found on Amazon as of yet. Will my iTunes CD rips play on my phone with the DDJ 1000? I am looking for a good back up in case my DDJ 1000 Rekordbox, and Laptop all crash out. What exact cords would you also recommend I get to run my Android tablet with music directly to my speakers. P.S. What DJ app do you recommend?

I see the cord and I understand what you're saying when it comes to hooking it up. But my Android tablet & my phone have USB C connection only. What adapter do you recommend and do I lose sound quality or volume?

YES, But remember that you will be using each INPUT for each Channel. So I use channel 4 mainly as a back up to my Laptop. If my Laptop dies I already have my cell phone or Tablet set up on channel 4. There are 2 separate inputs for your Mic's, 1 - XLR and 1 - 1/4" sockets, Also there is an EQ for your Mics and a Separate Volume control for each output (1 & 2) Also if you wanted to set up a cell phone or Tablet to each channel you could do that and have like 4 different devices in each channel. Each Channel has it's own INPUT. Also these INPUTS could be used for TURNTABLES or Stand Alone Controllers with no Mixer. I beleive Digital DJ Tips may have touched on this in their review of the DDJ -1000 / SRT (Serato Version). If you have any further questions I'll be happy to answer them and when you get your Controller you'll fall in LOVE with it. I did. Happy mixing.

Thanks again for the info. I tested this with 4 different devices connected via RCA like you mentioned and it is working like a charm. Thanks again for creating your videos, they really helped me on deciding for the DDJ-1000. Salutations from Mexico City.

@@cosmicpaladin369 De nada Senor, From Phoenix Arizona. Glad I could be of help and Information.