Видео

@@RatPoison-t2m wall ride-or-die poisonaut!!!

@@BaStAgE ahhhh I know what youre saying!!!! Yeah I have this game on the steam deck and can show just the screen, but this is on the actual hardware in the garage, something nostalgic about using the real hardware and not an emulator. Also don't want to drop $$$$ on something like a signal passthrough to the pi that my camera is sending it's image to specifically for av cables

yo seriously, thank you for speaking up! turns out there's a 9 dollar converter that I can hookup the sega to and then use hdmi passthrough to send it to the pi. My setup simply uses the in browser youtube studio to send the signal directly to the stream, but I'll look into obs again to see if I can use multiple camera sources so it behaves like an actual livestream and you see my face and a good view of the screen, or just my voice and the sega :p

@@gerikmeyers5523 I didn't manually scale it up others did and accounted for those differences. What I did do was to use a heat gun on tough sections and I accidently tried the wrong ball socket on the abdomen section. Maybe I can take it apart and try to use the heat gun and clamps to tighten the joints, otherwise ive seen people mention to use clear nail polish to tighten the tolerances

@@frankenmintahh gotcha, good luck with the nail polish! I might have to remember that trick for the future

@@Sick_Flip thx for the heads up

@ Wanna play soon?

@@Sick_Flip maybe a little later I was about to try some retro gaming in the garage, I'll reach out if I'm online later tho, thanks for keeping an eye out for me fam!

@ ok

I just tried to look into this based on your reply. I'm not finding anything to match what you're saying here. Also I'd argue the amount of xantham gum actually used per blunt is miniscule compared to the amount of tobacco leaf and cannabis used. I've found that if anything, the tobacco is cured improperly on the grabba leaves and CAN taste God-Awful. It did not impact the taste, but I will say that it let you use more tobacco than you would have wanted so the blunt itself was harsher. I try to use as little as I can but without running into an issue that the blunt gets unraveled constantly because I cut the leaf too small. More like pectin is terrible to use because it is often bitter. All I could find was that xantham gum powder was not meant to be combusted and it may be an irritant...but tbh so is tobacco leaves, it can be too much or taste awful if cured improperly, the amount of xantham gum used therefore is not enough imo at least to cause issue, if it is, you should consider a different method of ingestion besides smoking

@@frankenmint No, you should not smoke xanthan gum. Inhaling xanthan gum can cause flu-like symptoms, nose and throat irritation, and lung problems. Xanthan gum is a polysaccharide secreted by the bacterium Xanthomonas campestris. It is generally safe to consume in the amounts found in food, and in doses up to 15 grams per day when taken as a medicine. However, it can cause side effects such as intestinal gas, bloating, and digestive upset. -Google AI

@@JamesLeeRebudz next to a wood pile in dark spaces... This tracks ngl

@@sailorsheffield9128 Jesus I'm pretty sober right now. Check back in about 43 minutes fam

No they aren't. Try talking about something you actually know about instead of making up bullshit

@@Liberty4Ever if I wasn't already neck deep in printers I would consider it for sure it seems awesome from what you've described

@@frankenmint - There is no perfect 3D printer, but our choices are so much better now than even a year ago. There are a few breakout printers that have caught my eye recently. I liked the features of the Creality K1 Max but was concerned that it wasn't ready for prime time, but many people are surprised at how nice the K2 Plus looks. I'm sure it'll have some teething issues, given its complexity, but Creality seems to have stepped up quite a bit in their new flagship printer. FlashForge just announced the AC5X which has a clever four filament feeder that can feed 95A durometer TPU, and it's a reasonably priced coreXY printer. Prusa just announced their Core One coreXY printer. It has some very interesting features, is clearly their response to Bambu Labs enclosed coreXY printers, and is reasonably priced by Prusa standards. The SV08 appeals to me because it's fairly simple for a coreXY printer so it has the potential to be reliable, or at least maintainable and repairable, it has open source software and hardware, and it can be modded fairly easily and the community is stepping up to do that. Sovol seems to want to sell me a printer and not examine my designs on a cloud server or otherwise monetize my privacy and security and that's important to me. Others have different 3D printing needs and wants so they'd rightly make a different choice. Choice is good!

yeah, i noticed that! I think I swapped the first replacement battery into a different controller and now it's working okay once I got it to take a charge and now they charge as expected

yeah it turned out that the file I put into the x1c made my supports too strong and so those parts were a dud still... I ended up going back to the sv06 to get them done. back in 2013 I built a reprap prussa mendel 2 and that experience sort of sucked so I'm tempted but would prefer to not mess with a voron anytime soon, unless I could perhaps inherit someone else's failed project. I also have a large (2.8mm filament) conveyer belt printer to work through and get done so I'll jump on that at some point in 2025

I think my controller failing to charge on the dock is the culprit. I originally had a replacement battery inside, but swapped it for a different one and as I said, the usb-c cable seems to be working to charge it from usb hub in my office. I'm using the controller now to drain the battery and see if it will work with the charger when its lower/almost dead. The first replacement battery was fully drained so I swapped that with my 2nd dead controller that was fixed (due to the face buttons not working) and that IS CHARGING on the charging station dock (fingers crossed!) I'm going to replace the broken microphone ribbon cable inside it, then assemble it fully and begin testing it (I'm marking it with a red bottom, the one that failed to charge has a blue bottom). These are the batteries I bought and they do seem to work for the units I did fix. so far I've replaced three batteries amzn.to/3ATN61X

I didn't expect them to retool The sv06 first, good point. Id wager if they did one it's not due till after lunar new year

@@coachkelly8641 some context I recorded this but also made one for my buddy Joe 😂 I've gifted one to my buddy Joe and I had this in drafts for maybe 3 weeks. Wrecking ball uses it and loved it. He'll see your comment soon enough, do us a favor and subscribe to him so he can get in on the live streaming bandwagon youtube.com/@jackrowe8804

@@sallyidol6281 I did make a caprese salad edible earlier, but I swear I feel sober right now!

She pooped in the dirt bucket... NOW I KNOW WHY I INSTINCTIVELY BANNED HER FROM THE GROW SPACE

@@richardmartin2471 I'm not doing that. If you look at what happens the water only the cold line is going through the filter. Yeah you have to find a specific filter to do that like the filter that goes in line to the water heater and then the water heater processes the water, but you're still getting impurities from the water filter itself and the heating element and the stuff in there