- Видео 50
- Просмотров 33 244
Inveno Engineering LLC
США
Добавлен 9 июл 2018
HOW TO ACHIEVE RELIABLITY WITH ELECTRIC CONDENSATE PUMP UNITS
When pumping condensate, the first choice is an electric condensate pump unit over all other pumping methods. Electric condensate pump units consume less energy than other technologies used in pumping condensate. Pumping condensate is easy, because condensate is the purest water and is not an aggressive fluid found in process plants.
With the right electric condensate pump, 25 years of reliable operation is achievable.
However, plants worldwide struggle with high electric condensate pump failure rates because they select the wrong pump for the application. These failures are a major problem in condensate system reliability.
Remember that condensate systems operate at 211°F or above. Theref...
With the right electric condensate pump, 25 years of reliable operation is achievable.
However, plants worldwide struggle with high electric condensate pump failure rates because they select the wrong pump for the application. These failures are a major problem in condensate system reliability.
Remember that condensate systems operate at 211°F or above. Theref...
Просмотров: 100
Видео
Steam Waterhammer -- Part Two
Просмотров 2813 года назад
Water hammer is never normal in a steam and condensate system, and it is totally unacceptable in today’s plant operations. Not only is water hammer is a system issue; it is also a safety issue. Understanding the nature and severity of water hammer in a steam and condensate system will allow plants to avoid the safety risk and destructive forces. A better understanding of steam system water hamm...
Steam Waterhammer --- Part One
Просмотров 5253 года назад
Water hammer is never normal in a steam and condensate system, and it is totally unacceptable in today’s plant operations. Not only is water hammer is a system issue; it is also a safety issue. Understanding the nature and severity of water hammer in a steam and condensate system will allow plants to avoid the safety risk and destructive forces. A better understanding of steam system water hamm...
Calculating Steam Cost
Просмотров 1,1 тыс.3 года назад
Knowing the correct cost of steam is very important for many reasons, and all of them have to do with improving the company’s bottom line: 1. To properly evaluate the economics of proposed steam system efficiency improvement projects. If the calculated steam cost is not accurate, many feasible energy projects may be missed or rejected, while infeasible projects may be approved for implementatio...
NPT Steam Connections Part three
Просмотров 1703 года назад
Steam leakage plagues steam systems worldwide. The top cause of unwanted steam and condensate leaks is threaded connection failures. One steam leak can cost the plant well over $2,000 per year in energy losses-and that cost does not include all the other negatives attributed to steam and condensate leakage. Despite their flaws, many industrial plants still use threaded connections for many reas...
NPT Steam Connections Part Two
Просмотров 1743 года назад
Steam leakage plagues steam systems worldwide. The top cause of unwanted steam and condensate leaks is threaded connection failures. One steam leak can cost the plant well over $2,000 per year in energy losses-and that cost does not include all the other negatives attributed to steam and condensate leakage. Despite their flaws, many industrial plants still use threaded connections for many reas...
NPT Steam Pipe Connections Part One
Просмотров 1,2 тыс.3 года назад
Steam leakage plagues steam systems worldwide. The top cause of unwanted steam and condensate leaks is threaded connection failures. One steam leak can cost the plant well over $2,000 per year in energy losses-and that cost does not include all the other negatives attributed to steam and condensate leakage. Despite their flaws, many industrial plants still use threaded connections for many reas...
Steam Quality Part Two
Просмотров 2634 года назад
Today’s manufacturing techniques of heat transfer and control and related standards are all dedicated to improving and providing the highest-quality product to the marketplace. To attain the highest quality, each manufactured component of the final product is inspected repeatedly and measured. This ensures that it meets the manufacturer’s and consumer’s expectations. Steam plays a vital role in...
Steam Quality Part One
Просмотров 2414 года назад
Today’s manufacturing techniques of heat transfer and control and related standards are all dedicated to improving and providing the highest-quality product to the marketplace. To attain the highest quality, each manufactured component of the final product is inspected repeatedly and measured. This ensures that it meets the manufacturer’s and consumer’s expectations. Steam plays a vital role in...
Steam Trap Sizing Overview Part Two
Просмотров 5684 года назад
Sizing a steam trap properly is critical to ensure high reliability. When sizing a steam trap there are a number of items that need to be documented and the following example will review. One of the things we need to do is come up with a sizing factor. All steam trap manufacturers will have a sizing factor for their condensate capacity charts. Example, inverted buckets sizing factor is three to...
Correctly Sizing A Steam Trap - Part One
Просмотров 1,4 тыс.4 года назад
Correctly Sizing A Steam Trap - Part One The factors and information required to size a steam trap correctly is discussed in detail in this presentation.
Steam Valve Internal Leakage Part Two 2
Просмотров 794 года назад
My name is Kelly Paffel, Technical Manager for Inveno Engineering, LLC, located in Tampa, Florida. We're a domestic and international company focused on steam system engineering and designs. Today I want to talk about steam valve internal leakage detection and testing methods (part two of a three-part series). This is part one of a series. And today I want to go through the type of equipment us...
Steam Valve Internal Leak Detection Part One
Просмотров 9564 года назад
Steam valve internal leakage is one of the most difficult failures to detect and analyze, costing plants millions of dollars a year. Testing the body temperature profile of the steam valve is only a small piece of the required investigation, and using this inspection alone will make it very difficult, if not impossible, to determine whether a steam valve is leaking. The most reliable test metho...
Steam Trap Station Visual Testing
Просмотров 1,7 тыс.4 года назад
Testing Steam Traps by the Visual Method Visual steam trap testing is a fast and easy test method, which can be easily done by plant personnel with very little training. A testing-valve combination or an inline sight glass for reviewing the steam trap discharge is an effective way to test the steam trap operation. www.invenoeng.com
Virtual Engineering Root Cause Analysis NO 28
Просмотров 354 года назад
Virtual Steam System Engineering Support is Inveno Engineering, LLC’s latest offering to support our clients during the COVID-19 pandemic and beyond. Access to plant operations can be limited because of the pandemic as well as for a variety of other reasons. The need for engineering support, however, does not change. We have developed the following program to meet the plant needs. Here’s how it...
Installation Guidelines for Steam Heat Transfer Components
Просмотров 674 года назад
Installation Guidelines for Steam Heat Transfer Components
Steam System Thermal Cycle Efficiency Benchmark
Просмотров 1835 лет назад
Steam System Thermal Cycle Efficiency Benchmark
Steam and Condensate Leakage Causes and Corrections
Просмотров 7485 лет назад
Steam and Condensate Leakage Causes and Corrections
Flash Steam Recovery Cascade and Thermocompressing
Просмотров 1,7 тыс.6 лет назад
Flash Steam Recovery Cascade and Thermocompressing
Steam Engineering - Steam Terminology Part Two
Просмотров 1446 лет назад
Steam Engineering - Steam Terminology Part Two
Steam System Engineering - Steam Terminology Part One
Просмотров 1286 лет назад
Steam System Engineering - Steam Terminology Part One
Does it matter what fuel is burning ,eg LPG or methane
Thank you
What is the meaning of PSI in steam trap
D humidification
I have 233° steam going into the heat exchanger at the condensation point I only have 86 even through the trap I’m only getting 85 and 85 but we’re having problems maintaining humidity in the server farm I don’t believe 80° water is high enough for dehumidifier Quetion or reheat
I have a Shell heat exchanger and I believe they installed the trap backwards called Hoffman gave them the model number they said the arrow was supposed to show flow they’ve got the arrow appointment in the wrong direction what is the temperature drop supposed to be through a trap if it’s working correctly is it 10°
interesting ..pls advise, what is the level height could be for the steam line to condensate line
I was just looking for this thanks bro👍
what is the reason behind setting ultraprobe to 25 khz? and how to do it?
Any opinion on testing steam traps with thermal cameras ? How accurate is that ? main problem we are focusing is on is that to find the operating conditions of Process traps - Shell & Tube, Jacket Vessels etc
Nice info , thanks