Видео

@@20dsm The only way to find the true reason is to remove the gearbox and check all the parts in there: clutch, flywheel, all the bearings, input shaft and etc. Watch my newer short that I show what was the reason in my case, it was damaged input shaft and clutch disk spline both.

@ the cars had a flywheel and clutch kit. And still knocking but I Don’t think the guy who done it checked other components literally just swapped out and put back together. And then told me he thinks it’s bottom end knocking but I really don’t think it is as it stops with slight foot pressure and pushing on gears when in neutral.

@@20dsm The same story as me. Some mechanics don't check everything, they just replace the clutch and install back the gearbox. In my case the mechanic didn't found that the flywheel was failed and the input shaft spline was damaged, so that damaged the new clutch disk spline. So I repair the car myself, but I have enough experience to do it. The sad thing is that even good mechanics don't do their job as expected sometimes.

@@20dsm It's possible the knocking you hear is coming from the input shaft bearing inside the gearbox and there is also another bearing between the input shaft and the secondary shaft. Also, there are cases of not tighten enough flywheel.

@ cheers thanks for that, I just really don’t think that it’s the rod knocking like few have said already. Will drop the box soon and see what’s going on.

@TheOneWhoMotivates223 No, for me they are more than enough. Of Course it depends on your needs.

@SVN345 well for normal use ofc I asked, how's it's build quality

@TheOneWhoMotivates223 The build quality is very good, it's massive with perfect airflow. Only if you want fans that can be controlled (LEDs and speed) you have to replace them. Also the GPU max size is 340mm.

@SVN345 what does that mean for gpu size?

@TheOneWhoMotivates223 I mean GPU length, sorry.

@@zombiedeutsch Also the games were more interesting, nowadays have incredible graphics but poor story and experience.

@@TonyStorytimesOrginal Maybe. There should be installing instructions, from where you download it.

Thank you!

@@meno4672 Glad I could help 😊

@@DarsDaKing What do you mean that new folder with(1) explain please?

@ I can’t explain exactly but I think I was trying to run two different versions of the game. I figured it out now.

@@DarsDaKing Make shure that the original game is v1.4 before you install the mod and try to disable antivirus if you loosing files.

@ST0RM_MUSIC_fr Don't worry the e46 m3 is still there. 😃

@@SVN345 phew thats a relief 😮‍💨

zamunda.net/banan?id=632198&t=game You have to register.

@@SVN345 now what I downloaded "Need for Speed Most Wanted Black Edition [FullHD + Widescreen Fix].exe.torrent" from the website

I don't have any problem with the game.

@@juggliuk_3195 zamunda.net/banan?id=749791&t=game You have to register.

Hi

@mendyshelios0451 Yes, you are right it's better.

@mishlydacosta8869 zamunda.net/ Register in this website and download it.

@mishlydacosta8869 zamunda.net/banan?id=749791&t=game That is the torrent I'm using.

@mishlydacosta8869 Yes, that's the installing instructions of the mod because that is the latest version and it works on collectors edition 1.4.

Yea

@mishlydacosta8869 No, it's graphics mod only but maybe you can add some.

@mishlydacosta8869 I don't know. Try it and text me back, I'm curious!

no it doesn't work on collectors edition shows error 😢

@mishlydacosta8869 But wait, now I found that I had it installed on collectors edition and it works. What is your error maybe some .dll file missing or what?

Did you delete the scripts folder and is your game version 1.4 ?

@@محمدالشهراني-ك7م3ف Yes it is.

@@JorgeSJARG4Ever There are many ways to make it. I also had different ideas but this was the best for me with the materials that I have at home.

@@telewiin I don't know. I don't think it is possible in your case, because one cable powers both the fan motor and RGB. The thing you can do is to replace the fans with others that can be controlled with fan controller or directly by Motherboard if you have that function in yours. The harder thing is you to do what I did in the video with 4 pin but not sure for 3 pin molex fans.

@@7lkakashi288 Start to disconnect each fan one by one till LEDs start working but connect back last one you have disconnected before you remove the next one. If that doesn't work tell me do you have fan controller or they are connected to Motherboard.

@SVN345 I recently bought two fans that only have a molex input, but when I plug them in, they turn on white for a second and then turn off. I don't have a controller, and when I tried to plug the input in only partially, it worked, but it's not stable. When I plug it in a little more, it turns off, so I don't really know what the problem is.

@@7lkakashi288 Are both fans doing it?

I mean when you connect only one of them?

@@SVN345 Yes I got them recently they are the same thing but the fan that comes in the back with the case works fine

@@izhanahmed5458 The airflow is perfect!

@@Fhjdkigff-n7p 4.5kg without package.

@SVN345 thanks dude

@@oyasumii If you have 4pin molex connector, yes it is. Just pull out the pin or cut the cable and the rgb will be stoped. If your PSU cables are not colored find which one is the 5v.

@@Out_of_Sync_Perspectives Thanks! It does its job very well. Brake cleaner spray removes paint easily, but dries the skin.

You can try removing the molex RGB pin(you will find it in the bottom solely at corner)to temporarily disable RGB

@@stickyboi00070 You can just cut the 5v cable that powers the LED or better remove the pin of the white molex connector that powers it. If you do one of those things fans will work with no light.

@@Rocket1t You can't do it with stock fans. Molex connectors are powered directly by the PSU, so fan colors and rpm are fully automatic (cannot be controlled). You have to replace the stock fans.

@@oiredle6558 Yes just light On and light Off. But if I instal button that connects the two ground wires it will freeze the colours when I turn it On.

@@qax-ru1zq Turn on the PC, open the case back panel and start to disconnect each molex connector of each fan one by one. When it start to change the colors the last fan you disconnected is the one that causes the problem. I will upload a video how to deal with this problem.

I didn't know where to put the SW LED input.

@@odihafiz4926 You can't use the LED button with the stock fans, because they are Molex only. They are powered directly by the PSU and colors are automatic. If you want to use the LED button you have to replace the fans.

@@AliflynxX Yes you can, but don't forget to isolate the cable!

@@SVN345 if 4 pin rgb fan? Which one should i cut for the rgb?

@@AliflynxX en.m.wikipedia.org/wiki/Molex_connector The 5v red cable. If you don't have colours look at the form of the connector ( male/female and the angles to match the pics)

You welcome!

Remove the tempered glass and metal cover on the other side. Then try to squeeze the clips of the front mesh panel and pull it out.

I don't think so. It can't hold the contact when is not pushed. It's the same as the LED button.

You can't use LED button with stock fans because they are Molex and directly powered by PSU. To use the LED button you have to connect it to Motherboard (not every Mobo has this option) or some LED controller. But you have to replace the stock fans with others that have the smaller type of connectors like CPU fan 3 or 4 pin.

Yes it connects directly to power supply. Watch this for the RGB. ruclips.net/video/P6uOVFymbwo/видео.htmlsi=QoJK7L0wj3rjigcW

@@SVN345 ah i see thanks

It is the pre facelift key. This one is from my 1998 bmw 528i.The E46 pre facelift key is with the same remote control till 2000.

@@SVN345 TIL…

If you want to control the colors you have to replace the fans.

Cut the 5V red wire that powers the LEDs and put a button switch between the two parts of the cable. Sorry that I did not film how actually doing it..

@@SVN345 ok thanks

No, Molex connectors can not be controlled with software because they are powered directly by the PSU. Sorry... :)

@@SVN345 so i can not change the rgb modes what so ever?

click reset buttom.... i think

@@Smallz911 ruclips.net/video/P6uOVFymbwo/видео.htmlsi=Ucq2SCUhp0_CTVzA Watch this video. Here I explain how to make the RGB light turn off and on. And the only think I found is when you connect the two black ground cables the RGB LEDs stop changing their color. Unfortunately there is only one RGB mode that is auto and you can't control it.

​@@SVN345 thanks dude, i really appreciate it

I don't plan to use it again. 😃

Yes, for the money is perfect. But pay attention to stock fans, they are molex connector only. The speed is 1000rpm and LEDs are auto color changing, they work always when PC is on. In my another video I explain how to make them turn On/Off. But you can also replace them with others.

@@SVN345 Does it have any problems for this price? There must be some problems that you faced because I will buy it if it is excellent and i got high end pc so i must be so carful about change

@@ImaCrash I think the only problem is that you can't control the fan speed and LED colors. Also the max lenght of GPU you can use in this case is 340mm, but the airflow and cable management in my opinion are perfect.

@@SVN345 thanks much♤

@@ImaCrash You welcome! If you have other questions just ask me. ;)

Did you connect them to the PSU molex?

@@SVN345 nope

Are the fans spinning?

For me not. They are quiet enough.

ı know ı am asking a lot but what is your specs asking because of tdp

My build is low end. i3 10100f RX580 But don't worry the airflow of the case is very good you can use performance build in it. I bought it for future upgrade.

Thank you!

The stock fans of the case. Model is Xigmatek X20F with 4pin molex only.

I am really glad to be of help!