Видео

It works great. I found some leaks that otherwise was totally invisible. Couldn't find any good item to plug my turbo with, I asked ChatGPT & ended up with a can of coconut milk. Thanks!

My wife carries this one in her car and purse, I have seen a surge of new videos with .327 lately and I think Taurus has their revolver that is cut out for a rmr. 4" is where this cartridge really starts to shine though, and just about everything is a 2" which basically neuters it down to a 9mm with a super loud bark

@@yota243 Yep, Taurus has come out with a 4" RDO ready revolver in .327 and Ruger has reintroduced the SP-101s in .327 too. Excited to see where things go from here.

I dunno how much e85 "helps" because that's all I have ever ran once boosted. Yeah pretty much just adjusted the fuel table with mapecu3. You can adjust timing if you take it to a Dyno, and there is a lot of stuff it has I dont use like anti lag, and auxiliary injectors, nitrous control etc, but I just use it to compensate for the injectors

I found another post where a guy got 70rwhp/40rwtq on 7psi on a 2.0L going from 93 to e85. Power on 93 was 255rwhp and on e85 325rwhp for this setup. I was under the impression that these large 50+rwhp gains on e85 were going to be 20+psi turbo setups. So you are gaining a pretty penny and it's hard to almost impossible to detonate on the e85. @@yota243

Yeah those extra 2 cylinders and extra 2k lbs had nothing to do with the outcome. I do agree I'd never buy a dodge or a gm for that matter but I have two Toyota in the driveway that run like a top and have over a quarter million miles on em. Gonna be a long time before I think about not buying Toyota

@@yota243 I hear ya cars that break down are annoying, but for some reason I just do not enjoy Toyotas. No hate against them

@@michaelstevens04 if I had to buy "American" (dodge/ram hasn't been american since 2010 or so) it would be ford; my current work truck is a an f250 and I told em if they tried to put my in a Chevy I was gonna have to figure out a parking lot I could swap trucks in before and after work, cuz it wouldn't sit in my driveway lol. I've worked out of a ton of gms and my wife had a cavalier when we first got married, I just got tired of working on everything haha. At one place I worked we seriously had an extra work truck because one of our fleet was almost always in the shop. My wife drove her 07 RAV4 from 2011 till this past November, we finally broke down and got her a 2016 4runner. But I still drive the RAV4 a couple times a month and that Tacoma is a completely different truck now, me and a buddy did a full custom turbo on it about 5 years ago. Smiles per gallon went through the roof

Good luck! Lemme know how it goes

Yeah you on tacomaworld? www.tacomaworld.com/threads/yota243-turbo-build.332595/ thanks man, but I really just went the most economical way I could find on the not so important parts of the build lol. There are a few really good sounding rigs in the turbo bs thread

Yeah bank 2 sensor 1 would periodically show up with a malfunction and I swapped it a year or so ago and nothing changed. Someone said I could have an exhaust leak but it would either have to be a cracked header or the manifold gasket since the o2 sensor is made onto the shorties

I have no idea haha. I thought I might of had some coils that were going out so I swapped some from bank 1 to bank 2 hoping the problem would follow but it didn't. My next guess is that I may have a variance in my injector flow and I may get them flow checked and see how that goes. It runs pretty good in open loop but I still have a ~10% different in bank 1 and 2 ltft

What other kind of pictures would they put on a diaper box? Haha when you have a toddler you have a surplus of diaper boxes, honestly forgot about this video until I saw an email notification sorry if my box choice was unsettling

@@yota243 I wasn't trying to pick on your choice of targets it's i just saw a utube video of a woman dialing 911 while thugs were jumping on her car with her child in it and the 911 dispatcher said that they cannot do anything about it other than contact her city officials of the inconvience it's caused her, i was furious that this democratic liberal left wing thug supporting officials would not send the police to rescue this woman and her child. the child was crying and the mother was in shock of what the dispatcher told her, im seening this here in california a older woman walking minding her own business in santa monica was brutally beaten to the ground by a young thug in front of heartless witnesses because of this police defunding is starting this lawlessness and anarchy.

Not really I had a vacuum leak from the fuel tank because when I put a new pump in I didn't get the lid on quite right and that helped a little but I still get random misfired because I either have a intermittent vacuum issue or my coils are going out or something. Fuel trims stay 10-15% off each other from bank 1 to 2

@@yota243 looks like your running rich as your stft are pulling back alot of fuel. I've got a similer problem with my car

@@jayfpv2405 yeah I have messed with the tune a bunch but I basically can't tune it.correctly because there is such a discrepancy between bank 1 and 2. Ltft just wont get within 10% of each other so I I pull fuel to correct 1 the other goes lean and visa versa

FatKitty420 did it work

I couldn't tell you; I just use the unburned wire that was left from the original coil in this video so I don't even know how thick this was

@@yota243 Ok thanks for your reply anyway

Good eye sniper!

I took the chance going in to this that some of the quality of the knock offs were gonna be sub par, so I half way expected some of the stuff would need some tlc, but I think I paid like $60 or so for that wastegate as opposed to ~$300 for tial so i'm ok with a little extra effort for the money saved

Anton R it's a knock off; i was able to fix it with some valve lapping compound just used some where the fire ring seats

ruclips.net/video/WpQJ5c_Xseg/видео.html

lapping compound really ? lol im going to pick up Turbosmart gates right now and do same test

yeah it worked for me. another Tacoma guy recommended on3performance but it was after I had already bought all of mine and I was able to make it work. what kinda car you got?

well this is Alabama so possibly either late February or never haha

I report at least 1 comment a week as spam, and I don't have just a whole lot of traffic; I imagine larger channels that exclusively do wood working get bombarded with spam

just did the auto stabilize on the youtube editor... looks like it helps a little, but it is what it is since I filmed with a cell phone man. thanks for watching though and for the suggestions

got the ati bent bolt kit and scope mount. I drilled and tapped the receiver and put a 3-9x50mm scope on it. I did have some issues getting it on the paper because the mounts were so high that I could bottom the scope out and still be way too low. I wound up shimming the back of the scope up a bit to compensate and got it shooting straight again. meant to take it deer hunting this year but after the first few weeks of not seeing anything I decided I better take my .243 make sure I get some meat in the freezer haha

Scottie MORRIS if u pool on the footboard the vertical runners line up with the boards directly behind them and it makes it difficult to attatch those bottom horizontal boards to everything, so i offset the headboard a couple inches so i would have more to screw to

yeah just don't go overboard when you clip the spring, you could end up with a light strike. I have fired 50 rounds or so thru mine since with no issue but It may be a good idea to order a new stock spring and clip 1 coil at a time until you get the trigger light enough (I would test fire a few rounds after each clipping) or if you develop a light strick you can clip a few coils less on the new spring so u have a lighter trigger but still have a 100% fire rate. also I occasionally find ammo on selwayarmery.com but shipping is usually high and I get 5 or 6 people to place an order with me and just split shipping

hey man are you on tacomaworld? and if so what's ur username? I notice that giogutardude (who is a member) commented on one of your older vids, just curious

I think I am but let me try and see if not I'll set up one

cool im on there same name, wasnt really creeping but went to ur youtube page and saw u were kinda into guns and thought id let u know i make kydex holsters and have a link in my TW signature if u wanted to check em out.

yota243 sure absolutely

i love it. i carry it every time i put pants on. its a little bigger and heavier than most would conceal, but i can hit coke cans now single action at 30 yards and can empty a cylinder in about 3 seconds into a torso at 10 yards. im gonna try and kill a deer with it in a few months too.

been thinking of getting one I just love the taurus 66 I'm not even considering s&w or ruger, if I get a revolver THIS is the one I want.

+robert barna the only slight complaint i have is if u look where the barrel is screwed in it isnt quite perfectly square, but it shoots straight and the only reason i even noticed it is because i rear on the net someone else had a taurus revolver that had the same issue so i was looking for it, so sorry that u have now know. ive put a few hundred rounds thru it looks now and the only issue ive had is some tulammo swells and is konda hard to extract but brass casings are just fine

I just put a link in the video description down at the bottom.

Sweet thanks

+Smith Sights no i clipped the coils and that's what reduced the pull weight.

hey no worries i double checked everything when i got home today and everything was perfect according to that tool. i checked just like in that video linked in the other comments.

Funny enough, the dodge looks to be older than the toyota and theyre tied. Anyways, tug o war is about traction, not power...

Kingswood7189 funny dodge has a v8 and Tacoma has v6

You know whats funny the dodge has a v8 more weight in the back and the toyota has less power because its v6 but its long stroke so it has lots of low end Torque so you tell me what you want lol