![The Handy Dad TN](/img/default-banner.jpg)
- Видео 9
- Просмотров 21 108
The Handy Dad TN
Добавлен 8 фев 2023
I'm just a guy doing stuff and making mistakes, so you don't have to. There will be car, house, and other DIY stuff added as they come along.
I also write and edit stories about the awesome potential of humanity on r/HFY, and you can find me there as u/coldfireknight.
I also write and edit stories about the awesome potential of humanity on r/HFY, and you can find me there as u/coldfireknight.
1994-2001 Ford Explorer 4.0L V6 Mass Air Flow MAF sensor replacement
The fast version is to simply swap out the MAF sensor itself with a T-20 Torx security bit & the 2 screws holding it in...but this shows swapping out the entire housing, which I got for the same price as just the sensor.
There was also an issue with the fuel pump relay, so both things needed to be replaced in the end.
This video was also part 10 of my TikTok series, Well That Ain't Right. Link here: www.tiktok.com/@coldfireknight?is_from_webapp=1&sender_device=pc
There was also an issue with the fuel pump relay, so both things needed to be replaced in the end.
This video was also part 10 of my TikTok series, Well That Ain't Right. Link here: www.tiktok.com/@coldfireknight?is_from_webapp=1&sender_device=pc
Просмотров: 363
Видео
1994-2001 2nd gen Dodge Ram 1500 cup holder replacement
Просмотров 5957 месяцев назад
It's actually part 9 in my TikTok series "Well, That Ain't Right". The toughest parts of this job were finding the new cup holder and not breaking the OEM plastic. #thehandydadtn
2nd gen Dodge Ram 1994-2001 headliner replacement
Просмотров 9517 месяцев назад
Showing my experience replacing the headliner in my 2nd gen Ram. Most of it is straightforward, but you can also avoid a couple of my mistakes in this video, too. The job can be done in under an hour with a very few hand tools.
1996-2001 2nd gen Ford Explorer starter replacement & install
Просмотров 1,4 тыс.9 месяцев назад
This can help you replace the starter in a 2nd gen (1996-2001) Ford Explorer V6 SOHC, VIN code X in the eighth spot. Should be pretty similar to V6 OHC, since both engines are 4.0L, just with a different starter. You'll need 8, 10, & 13 MM sockets, a ratchet, and maybe an extension to get the work done. Should take less than an hour total if you have the part handy.
2nd gen 1994-2001 Dodge Ram headlamp replacement
Просмотров 31Год назад
Full installation video for 2nd gen Dodge Rams, which also apply to Dakotas from the same era. Includes tools used. I recommend watching the full video to avoid any of the issues I had along the way.
2nd gen 1994-2001 Dodge Ram headlight adjustment
Просмотров 6 тыс.Год назад
The quick & dirty way to adjust the headlights on your 2nd gen Dodge Ram. Not every vehicle is the same, but this is a good basic technique to fix unaligned headlights, regardless of what you're driving.
2nd gen 1994-2001 Dodge Ram blower motor and resistor replacement
Просмотров 2,2 тыс.Год назад
Join me as I continue working to turn this half-ton of lemons I bought into lemonade (this truck has needed a LOT more work than I expected when I bought it). This is the full diagnostic and installation video for the blower motor and resistor for a 2nd generation Dodge Ram that I mentioned in my TikTok & Reel. The job itself should take less than an hour, and I recommend watching the whole vid...
Easy DIY storage shelves
Просмотров 30Год назад
How to build (or expand) easy DIY storage shelves with standard hand and power tools.
2012 Ford Expedition selector cover replacement walk-through
Просмотров 9 тыс.Год назад
Watch the whole video before starting. It took me less than an hour to complete, and I've never done it before. Be gentle if you're not replacing the bezel since the plastic IS old and brittle. Like, comment, and follow for future content. Part numbers: selector cover (AL1Z-7D443-AB) and black trim bezel (7L1Z-7E391-AA) or chrome bezel (7L1Z-7E391-AB) Tools used: 7MM socket w/ extension and rat...
Had the same issue with my 2014 F150, still looking for a similar video but this might be the closest thing out there. That other video didn't show much at all!
Same problem is what led to me making this video in the first place.
Excellent video, I just finished installing a new set of headlights on my ‘96 Dodge B3500 and I thought I knew what to do and your video helped me be more confident about it. It’s sure going to be great to be able to see again at night.
Glad it helped
Thank you sir you’re a gentleman and a scholar. I appreciate you breaking it down again after it was replaced.
I do my best to make content that would help *me* know the job was complete, so figured it might help others, too.
K, so this ain’t the procedure for 1995-2001 explorer. This is the procedure for 1995-2001 explorer SOHC V6 models. The OHV doesn’t look like this.
Good to know for other folks.
Thanks for such a detailed video helped a lot
Thanks man im at work and they don't have this in the wsm so this helped out so I didn't do anything dumb and break stuff 😅.
Glad it helped. When I did this, I could only find the 1 video, and it wasn't helpful so I did this!
I had the common issue of a plastic piece and spring breaking inside the shifter mechanism. I could barely get my 2015 expedition into park because of it. I was able to fix it because of this video. Thanks so much for making this!
Glad to have helped!
Where did you get the headliner ?
Lucked into a find at the local pick & pull.
eek. that's a '98 and up pickup, not a 94-97. In the earlier ones that cupholder's up above the radio. (I have two of 'em, and yeah, they're both broke).
Ah, didn't realize they'd moved it between 97 & 98, but it's still a 2nd gen. Does explain a lot of issues I had with a 97 parts truck I'd picked up at one point, haha.
Real good video. Short and to the point. Thx.
I try to keep these trimmed down to useful info.
Glad to hear it worked. I couldn't find a good video for it, so I made one.
Thank you for this video! Just used it on a 2017 Expedition XLT and everything was the same.
What is the screwdriver needed? Couldn't see but the screw looked like Philips thx
Was a Philips, as I recall.
Sorry, thought I'd answered this a while ago. Should be a Phillips heads screwdriver.
Thanks!
Hi how come you changed the motor as well?
The bearing in it was so bad, you could hear the fan wind down when it cut off.
Doing this now to mine. Same symptoms so I'm replacing the resistor and FSN. Hope it works
Sorry, mislabeled it as install