InEL FPV
InEL FPV
  • Видео 12
  • Просмотров 17 698
EVERY DRONE needs this - Thermal Camera Building Instruction - DJI, FPV
InEL IR-CAM (NTSC/PAL): shop.inel.at/produkt/ir-cam-ntsc-pal/
InEL IR-CAM Holder: shop.inel.at/produkt/ir-cam-mounts/
The IR-CAM Holder combines the best of three worlds: FPV, thermal inspection and camera drones.
The Features of the IR-CAM Holder are:
- Replaces the functionality of a flight controller in combination with the IR-CAM
- Inertial Measurement Unit for the 1-axis gimbal
- Supply voltage measurement
- Lightweight and robust design
- Easy to use
- USB to Serial Passthrough for Firmware Updates
- Mounting holes for various VTX (20mm, 30.5mm)
- Suitable for various batteries (2S-6S)
- ELRS extensibility for the usage of Radio Controls
/**** Timestamps ********************/
00:00:00 - Introduct...
Просмотров: 703

Видео

5 NEW Features - Firmware UPDATE - Mixed Thermal FPV - InEL IR-CAM
Просмотров 2 тыс.Месяц назад
InEL IR-CAM: shop.inel.at/produkt/ir-cam-ntsc-pal/ The InEL IR-CAM merges visible images with thermal images for the usage on FPV drones. Based on our experience and your feedback, we have improved the usability and functionality of the system. This enables a better usage for photovoltaic and building inspection. In addition to many small adjustments, there are 5 new features which I would like...
Mixed thermal FPV - ULTIMATE Guide - InEL IR-Cam
Просмотров 9 тыс.5 месяцев назад
InEL IR-Cam: shop.inel.at/produkt/ir-cam-ntsc-pal/ Drone Builds: rotorbuilds.com/profile/40697 InEL IR-Cam is designed from FPV-pilots for FPV-pilots. I’m Thomas the developer of the IR-Cam. In this video I want to show you all the features of the mixed thermal FPV camera and how you can integrate it into your FPV setup. Low latency of the visual camera in combination with the thermal view to f...
Fawn Rescue with FPV drone - InEL IR-Cam
Просмотров 5195 месяцев назад
InEL IR-Cam: shop.inel.at/ The majority of fawns are set in the months of May/June. The first mowing takes place at the same time. In the first weeks alive they have no flight instinct. Instead they make themselves small to be almost invisible to their predators. Unfortunately, this does not work for the farmer with his mower. Up to 25000 fawns die due to mowing operation in Austria every year....
Robust 1-axis gimbal for thermal FPV camera - InEL IR-Cam
Просмотров 4847 месяцев назад
ULTIMATE Guide: ruclips.net/video/Rx71QhLVlmY/видео.html More information: shop.inel.at/ InEL IR-Cam is designed from FPV-pilots for FPV-pilots. It merges visible images with thermal images for the primary usage on FPV (first person view) drones or other RC hobby devices. Low latency of the visual camera is in combination with the thermal view to find anything anywhere. InEL IR-CAM can be fully...
InEL IR-Cam - mixed thermal FPV camera TRAILER
Просмотров 1,2 тыс.7 месяцев назад
More information: www.inel-fpv.at Buy now: shop.inel.at/produkt/ir-cam-ntsc-pal/ InEL IR-Cam is designed from FPV-pilots for FPV-pilots. It merges visible images with thermal images for the primary usage on FPV (first person view) drones or other RC hobby devices. Low latency of the visual camera is in combination with the thermal view to find anything anywhere. #shorts #fpv #fpvcamera #fpvnewp...

Комментарии

  • @thehappycorgi
    @thehappycorgi 21 час назад

    how much is it?

    • @InEL-FPV
      @InEL-FPV 14 часов назад

      795€ + Tax

  • @Jaceace87
    @Jaceace87 8 дней назад

    Love this so smart

  • @nickedds2907
    @nickedds2907 24 дня назад

    👍

  • @nickedds2907
    @nickedds2907 24 дня назад

    This is super innovative for the open market and affordable too, i hope to buy one when i get the time and money and I hope you're very successful and get lots of attention. Market using popular youtubers channels so more people see your product because its one of a kind and sure to impress

    • @InEL-FPV
      @InEL-FPV 24 дня назад

      Thank you for the kind words, we are very pleased. We still have a long journey ahead of us, which we would like to share with you.

  • @ondrefekete8946
    @ondrefekete8946 Месяц назад

    what if i want to use USB c thermal camera?

    • @InEL-FPV
      @InEL-FPV Месяц назад

      Unfortunately this is not compatible

  • @swifferblunts
    @swifferblunts Месяц назад

    thats pretty epic

  • @theworldininfraredspectrum8879
    @theworldininfraredspectrum8879 2 месяца назад

    Well thought out integration and informative video. The picture-in-picture is fantastic.

  • @squaddingquads
    @squaddingquads 2 месяца назад

    Oh my lord, this is the coolest thing I've seen in fpv all year!!!!!

  • @GeorgeWS
    @GeorgeWS 4 месяца назад

    Damn that price though 😂

  • @k1ortia
    @k1ortia 4 месяца назад

    I would rather use a potato as an fpv camera then this. Looks pure tripe....🤮

  • @Jandodev
    @Jandodev 4 месяца назад

    I made one of these couple years ago with a flir sensor and a switch to change directly over the analog feed! But really well done with the IC!

  • @mamont090671
    @mamont090671 4 месяца назад

    реально? такое дерьмовое разрешение за такие деньги?

  • @GramGrinst
    @GramGrinst 4 месяца назад

    Wow, impressive. Ich fliege seit mehreren Jahren DJI Wärmebild Drohnen. Da das Lust auf mehr machte, DJI mir aber zu langweilig war, habe ich mit dem FPV-Fliegen angefangen. Allerdings sind FPV fliegen (Spaß) und Wärmebild (Arbeit) halt völig unterschiedliche Anwendungsfälle. Was sich mir bei eurer Lösung nicht erschließt ist eben dieser Use Case. Eine 1000€ WB-Kamera im Copter und dann Acro-Spaß haben? Naja... Für Inspektions- oder Suchflüge ist die Auflösung dann wieder zu schlecht. Außerdem ist dafür eine DJI im vollautomatischen GPS Missionsflug doch besser geeignet als ein zappeliger INAV oder Betaflight Copter.

    • @InEL-FPV
      @InEL-FPV 4 месяца назад

      @@GramGrinst Freut uns, dass du in beiden Bereichen tätig bist. Unsere Hauptmotivation ist der Einsatz zur Rehkitzrettung. Daher auch der Gimbal, um z.B. von oben in das hohe Gras schauen zu können. Aufgrund des eingeschränkten Zeitfensters von teilweise wenigen Tagen in der Früh, gilt es hier mit möglichst vielen Drohnen, möglichst viel Fläche abzusuchen. Professionelle Thermografiedrohnen kosten mehrere Tausend €. Ist man jedoch im FPV-Hobby tätig, verfügt man bereits über Brille, RC, Copter usw., sodass eine Drohne mit unserer Lösung für unter 1000€ realisiert werden kann. Mithilfe von Waypoint Missions lassen sich auch mit INAV autonome Drohnenflüge durchführen. Die Handhabung ist zwar noch nicht so intuitiv, aber das Potential ist da. Wir sind uns sicher, dass aufgrund dieser Kombination noch viele Einsatzmöglichkeiten darauf warten entdeckt zu werden. Gebäude- und Photovoltaik Inspektionen sind im privaten Bereich sicher möglich. Die Optimierung für FPV schließt natürlich die Anwendung auf anderen UAV nicht aus.

    • @GramGrinst
      @GramGrinst 4 месяца назад

      @@InEL-FPV Ist sicher ein Anfang, aber die Auflösung der verwendeten Kamera halte ich für die Kitzrettung für nicht ausreichend. Angefangen habe ich mit der M2E Dual mit vergleichbarer Auflösung, da musste man zur Kitzrettung ziemlich tief fliegen, um etwas entdecken zu können. Hierdurch werden natürlich die Flugbahnen eng und die Flugzeit steigt, außerdem sind Hindernisse am Feldrand (Bäume) und kleine Strommasten, die mit höherer Auflösung auf 50m einfach überflogen werden ein Problem. Inspektionen gehen schon mit der Auflösung, aber hierfür muß das Bild dann onboard aufgezeichnet werden. Ein analoger Video-Stream wird keinen Kunden begeistern. Ich finde euer Projekt sehr interessant, Kanal aboniert. Freue mich auf weitere Videos und Weiterentwicklung hierzu.

    • @JuryLoecker
      @JuryLoecker 4 месяца назад

      ​@@GramGrinst du hast da einige Punkte richtig erkannt ! Die Flughöhe in kombination mit der Auflösung bringen einige Vorteile. Aber da bist du bei DJI oder anderem "Profigerät". Mit sowas wird klassischerweise ja auch die Rehkitzrettung betrieben. Allerdings legt man da mal gerne min. 3K€ .. bei DJI 5-6k€ auf den Tisch. Das funktioniert auch nur mit einem >=2-Achsen stabilisierten Gimbal .. der auf einem FPV-Copter nicht sinvoll zu realisieren ist. Unsere Idee war dahingehend, dass ein FPV-Pilot das ganze "Setup" bereits hat, und für <1k€ einen Copter nachrüsten kann .. dann evtl. noch einen Monitor für 150€ für die Retter. Das Problem ist doch, dass wenn das Wetter passt, alle gleichzeitig Mähen. Daher ist es fast wichtiger, möglichst viele Copter am Start zu haben... als wenige "Profigeräte", so zumindest unsere "Denke". Zum Usecase .. einer ist besprochen, der nächste wäre PV-Inspektion. Da werden wir bald ein Video dazu machen.

    • @EEMtube
      @EEMtube 4 месяца назад

      @@JuryLoecker Sehe ich auch so. Wer 5k+ hinlegen kann, soll es tun. Dazu teure Akkus, teure Ersatzteile und die Kamera ist nicht auf anderen Plattformen nutzbar. Wer die Kosten weiterverrechnen kann: gut für ihn. Hier wird eine Lösung angeboten, die es wesentlich mehr Menschen auf wesentlich mehr Plätzen möglich gemacht, etwas Gutes zu tun.

  • @KittFPV
    @KittFPV 4 месяца назад

    dayum!!!! I've wanted thermal on an FPV rig for foreverrrrrrr, so sick!!!!! 😻😻

    • @JuryLoecker
      @JuryLoecker 4 месяца назад

      we also .. but it was a long and hard way .. now we are happy 🙂. I hope the pilots value the "package" we made. In the moment i have the feeling, the IR-resolution and FPS is the "only" spec that are seen. Like lipstick and high-heels .. after some time you find out, that there are more important properties ;-)

  • @Fenweekoh
    @Fenweekoh 4 месяца назад

    i have zero need for this, have never flown fpv but damn i want it lmao

  • @defconuser799
    @defconuser799 5 месяцев назад

    yeah its a nice product but a little to expensive. a solution for fpv car and waterproof will also be cool i think. great work, i love this !

  • @dragonoffmsk
    @dragonoffmsk 5 месяцев назад

    I will assume that this is a camera without an IR filter with post-processing. it cannot be a full-fledged thermal imager.

    • @InEL-FPV
      @InEL-FPV 5 месяцев назад

      We use a longwave infrared sensor (8μm to 14μm) with uncooled VOx microbolometer.

  • @Rothammel1
    @Rothammel1 5 месяцев назад

    120x160px ist nicht gerade viel

  • @Rckid28
    @Rckid28 5 месяцев назад

    Wouldn’t it be much easier to use the walks now digital system with their thermal camera?

    • @InEL-FPV
      @InEL-FPV 5 месяцев назад

      They are bigger and have more weight. The view is narrower. I think that they cannot measure temperature and display it. Besides all the solutions we have added, the biggest advantage of our system is the picture in picture approach.

  • @fellpower
    @fellpower 5 месяцев назад

    i loled because of the price and the bad image quality ^^

    • @InEL-FPV
      @InEL-FPV 5 месяцев назад

      But have you ever seen such image processing with a latency of less than 100 microseconds? ;)

  • @서빈니007
    @서빈니007 5 месяцев назад

  • @Trule2456
    @Trule2456 5 месяцев назад

    Great product but FLIR Lepton is 105 bucks, where did the 800 euro markup come from? Unfortunately will be very hard to compete when 256x192 25fps sensors are avaliable in cvbs and usb for 200 usd.

    • @InEL-FPV
      @InEL-FPV 5 месяцев назад

      We use the best Lepton currently on the market and it's definitively more expensive than you mentioned. Don't forget the other components. In comparison to alternatives it's an FPV solution which consists of many different parts and features to be able to fly accurately and detect thermal hotspots. For more information see the video description.

    • @JuryLoecker
      @JuryLoecker 5 месяцев назад

      I think more realistic is 400USD for a CVBS IR cam ? But how you fly while the shutter is closed ? Also for pure IR vision 256x192 may be to low resolution for FPV flying ? For search and rescue, you need to identify your "target" .. is it a hot stone, or a dog ? .. with IR 640x480 you will know, but what is the price, and what is the size ? So finding a hotspot with "low-res" IR and identify it with the standard FPV cam, is the idea behind the System. fyi: i am the boss of the company, how dumpt a lot of time, effort and money in this project, mainly for our local hunters and farmers.

    • @joedatuknow
      @joedatuknow 5 месяцев назад

      If theres an a stable mode on the drone you can save 🔋 an fly longer by having the olption to tern off the tracking up an down lock target an fpv tilt the 6 min of flying time over 10 or 12 min is a bummer take care great ideal an i think this product is needed on the market with better battery life an longer flying times this will inly get better

    • @Trule2456
      @Trule2456 5 месяцев назад

      @@JuryLoecker Infiray tiny1-x is very good cheap thermal sensor used in all those cheap usb thermal cameras. Its also not subject to export restrictions like FLIR products.

    • @JuryLoecker
      @JuryLoecker 4 месяца назад

      @@Trule2456 yes, we know this sensor. It is cheep and has good resolution and FPS. We tried to contact the manufacturer about the datasheet and the electrical interfacing. But till now no response .. So in the moment it is no option, because the missing information, sorry.

  • @NitronNitron
    @NitronNitron 5 месяцев назад

    Hefty price.... but it's an unique sollution.

  • @TheAfricanpoofly
    @TheAfricanpoofly 5 месяцев назад

    I hope this is used for peaceful purposes :(

    • @InEL-FPV
      @InEL-FPV 5 месяцев назад

      We hope too. That is our intention. Have you already seen our fawn rescue video? 🦌

    • @EEMtube
      @EEMtube 4 месяца назад

      DJI is not blocking the usage of their products in a war zone. They restricted the selling in RUS and UA only, which is a joke. For DJI it does not matter if the product is bought in Poland or anywhere else and than carried. UA even droped the import tax on drones. Drone operators love the "find and rescue" abilities. The problem is not just the manufacturer, it is more likely the user, politics and loss of common sense.

  • @DaveSmith-cp5kj
    @DaveSmith-cp5kj 5 месяцев назад

    The resolution and refresh rate is way too low for the price. Unless the sensor is manufactured in EU or sourced from US cores, then it makes sense. I do love the PIP display approach though.

    • @InEL-FPV
      @InEL-FPV 5 месяцев назад

      I'm glad you love the "Picture in Picture" A US thermal core is used. Due to export restriction it's limited in its framerate. Because of the combination with the visible image there are no constraints. To reach the needs of a FPV pilot, we have focused on a low additional latency (<0.1ms). The system is manufactured in Austria.

    • @DaveSmith-cp5kj
      @DaveSmith-cp5kj 5 месяцев назад

      ​@@InEL-FPV The price is perfectly reasonable then.

  • @AndiGFPV
    @AndiGFPV 5 месяцев назад

    Super Arbeit. Aber 1000 Bucks is scho zach...

    • @InEL-FPV
      @InEL-FPV 5 месяцев назад

      Danke! Man bekommt dafür nicht nur eine Wärmebildkamera, sondern eine auf FPV spezialisierte Lösung bestehend aus mehreren Komponenten und Features.

  • @crazy_doge3972
    @crazy_doge3972 5 месяцев назад

    Great work

    • @InEL-FPV
      @InEL-FPV 5 месяцев назад

      Thanks :)

  • @i.i.iiii.i.i
    @i.i.iiii.i.i 5 месяцев назад

    Ukraine right now 👀

    • @Trule2456
      @Trule2456 5 месяцев назад

      They will never use this, 4x as expensive and worse sensors available on the market currently

    • @EEMtube
      @EEMtube 4 месяца назад

      @@Trule2456 than they should do, they got a lot of money to do that. But the fact that UA drone "experts" like you are watching this confirms the lack of thermal (and other) drones in UA. see first hand front reporting from the UA ruclips.net/video/kKmPUj4r9gM/видео.html beside that: make peace, not war.

    • @Trule2456
      @Trule2456 4 месяца назад

      @@EEMtube you have no idea what you are talking about and all your information comes from a RUclipsr payed by the UK government. If you read my other comments you would see I linked the thermal sensor that is being used.

  • @daich
    @daich 5 месяцев назад

    amazing stuff

    • @InEL-FPV
      @InEL-FPV 5 месяцев назад

      Thank you!

  • @campilottv
    @campilottv 5 месяцев назад

    Sehr schöne Lösung 👍🏻

    • @InEL-FPV
      @InEL-FPV 5 месяцев назад

      Danke 👍🏻

  • @hi_desert_rat
    @hi_desert_rat 5 месяцев назад

    Would love to try that out here in the desert.

    • @InEL-FPV
      @InEL-FPV 5 месяцев назад

      Sounds great! We expect to be able to ship to more countries within the next few months 👍🏻

  • @WestFPV
    @WestFPV 5 месяцев назад

    love this video, thanks for making this possible

    • @InEL-FPV
      @InEL-FPV 5 месяцев назад

      I'm really pleased

  • @sanitoeter69
    @sanitoeter69 5 месяцев назад

    Habe mir schon öfters gedacht, dass man FPV Drohnen dafür nutzen könnte. Cool, zu sehen wie das gemacht wird.

  • @zenrider_9622
    @zenrider_9622 6 месяцев назад

    Can you name all the parts and everything used with this setup including that screen, im new to drones so idk much but id lime to make this setup.

    • @InEL-FPV
      @InEL-FPV 5 месяцев назад

      You can find our latest build here: rotorbuilds.com/profile/40697 More builds will come in the future

  • @alainassaf
    @alainassaf 6 месяцев назад

    Great job guys ! You bring a lot of virtue to our hobby :) Self proclaiming to be your first fan by the way !

    • @InEL-FPV
      @InEL-FPV 6 месяцев назад

      Thank you! Our hobby can be so rich in variety :)

  • @certopacket1312
    @certopacket1312 6 месяцев назад

    geiler scheiss hobts an nachfolger in planung?

    • @InEL-FPV
      @InEL-FPV 6 месяцев назад

      Haha Danke :D Wir werden erstmal das aktuelle System etablieren. Dann kann man weiter schauen.

  • @alainassaf
    @alainassaf 6 месяцев назад

    Good luck guys !

    • @InEL-FPV
      @InEL-FPV 6 месяцев назад

      Thank you! :)

  • @eprohoda
    @eprohoda 7 месяцев назад

    gorgeous . have a great day~

    • @InEL-FPV
      @InEL-FPV 7 месяцев назад

      thank you, have a great day too :)