MelkMusic1956
MelkMusic1956
  • Видео 14
  • Просмотров 217 283
Tying French Horn Levers
Tying French Horn Levers
Просмотров: 4 828

Видео

Yamaha low brass valve guides
Просмотров 8 тыс.10 лет назад
Yamaha low brass valve guides
Woodwind springs
Просмотров 39510 лет назад
Woodwind springs
Saxophone key adjustments
Просмотров 6 тыс.10 лет назад
Saxophone key adjustments
Saxophone octave mechanism adjustments
Просмотров 9 тыс.10 лет назад
Saxophone octave mechanism adjustments
Clarinet key adjustments
Просмотров 47 тыс.10 лет назад
Clarinet key adjustments
Flute head joint corks
Просмотров 88410 лет назад
Flute head joint corks
Flute left hand adjustments
Просмотров 1,5 тыс.10 лет назад
Flute left hand adjustments
Joint cork quick fix
Просмотров 1,4 тыс.10 лет назад
Joint cork quick fix
Installing a water key
Просмотров 26 тыс.10 лет назад
Installing a water key
Pulling a stuck mouthpiece
Просмотров 1,2 тыс.10 лет назад
Pulling a stuck mouthpiece
Sousa Bell Dents Montage
Просмотров 15 тыс.11 лет назад
Joe Bratz takes on this dented Sousaphone Bell in: Sousa Bell Dents Montage... A montage of Joe taking out the dents. Call us at 414-771-0900 or e-mail at info@melkmusic.com Located at: 8625 W Adler St Milwaukee, WI 53214 *We do not own the rights to this awesome song by Earth, Wind, and Fire, but it is awesome*
Cleaning your Trumpet Valves
Просмотров 94 тыс.11 лет назад
Here is our video on how to properly oil and clean your trumpet/piston valves. If you take these steps and clean your valves regularly, you could save yourself a lot of money on repairs down the road. Call us at 414-771-0900 or e-mail at info@melkmusic.com Located at: 8625 W Adler St Milwaukee, WI 53214

Комментарии

  • @Istanbul661
    @Istanbul661 Месяц назад

    in alto sax, if we press which keys together with the octave key, the octave crook key does not go up?

  • @NeoSoulquarian
    @NeoSoulquarian 2 месяца назад

    Fantastic video. Right to the point. ❤

  • @Trumpetman12345
    @Trumpetman12345 9 месяцев назад

    This first time I cleaned my Bach I put the valves in the right casing but they were backwards

  • @johnfurman8211
    @johnfurman8211 2 года назад

    Blue Juice is good for clean valves. If they're dirty the detergent properties in it will flush out grime. The oil and grime mix will cause sticking. It's a good oil but I think it smells bad.

  • @basemsalha3425
    @basemsalha3425 2 года назад

    🖒🖒💚

  • @WayLAN_Media
    @WayLAN_Media 2 года назад

    Thanks

  • @paulgrimm6850
    @paulgrimm6850 2 года назад

    My new Bach was dirty with compound

  • @zacheryreeves
    @zacheryreeves 2 года назад

    My band director told me to flush out my valves but I don't know how to. Is there anyone that can help?

    • @davidbostock6933
      @davidbostock6933 2 года назад

      Get a new band director, or maybe watch the video.

  • @lindamorgan2678
    @lindamorgan2678 2 года назад

    Excellent ! Thank you so much saved a long trip to the city and solved 2 problems on my new pawn shop Clarinet

  • @evgeniiaburri2679
    @evgeniiaburri2679 2 года назад

    thank you very much, I had a problem with B low in my clarinet, and with your video I find a solution! :)

  • @lambertj.2892
    @lambertj.2892 3 года назад

    Is there no sound with this video?

  • @QCSDTV
    @QCSDTV 3 года назад

    So helpful. Thank you for taking the time back in 2013 to do this. It's still helping others like me :-)

  • @francistaylor5097
    @francistaylor5097 3 года назад

    Amazing! I'm now feeling smug because I've fixed my A and Bb clarinets.

  • @artifxcixl8684
    @artifxcixl8684 4 года назад

    Thank you so much!

  • @FanTrombone
    @FanTrombone 4 года назад

    I have a sousaphone that has over 300 dents in it...everywhere! I was going to try and remove them myself but after watching you work - no way! Great Job!

  • @eduardoangelgaribaygiordan6546
    @eduardoangelgaribaygiordan6546 4 года назад

    What did you do here? 0:37 I didn’t quite catch it...

  • @patriciacastaneda6940
    @patriciacastaneda6940 4 года назад

    good

  • @darrellhowell6219
    @darrellhowell6219 4 года назад

    How to i fix my D key

  • @toniharris505
    @toniharris505 4 года назад

    I lost my screw what else can i use

  • @shashankiyer8617
    @shashankiyer8617 4 года назад

    2:16:(:(:(:(:(:(:(:(:(:

  • @IWin02
    @IWin02 5 лет назад

    What do I do if the felt is starting to fall off? Can I stick it back on somehow?

  • @scottyrproductions9822
    @scottyrproductions9822 5 лет назад

    Can somebody please help I don't have one of those Rods you put the cloth on

    • @JohnsonSmithson
      @JohnsonSmithson 4 года назад

      Use a rod with cloth wrapped around it, I used a stick that holds flower and cloth around it and the job was done

    • @davidbostock6933
      @davidbostock6933 2 года назад

      Gun cleaning kits have similar.slotted rods.

  • @lenzotrumpet
    @lenzotrumpet 5 лет назад

    Problem with The Cheesecloth is that the little fibers tend to break off the cheesecloth and then into the pistons or get in between the valve casing and the pistons cheese cloth "esta Merda"

    • @davidbostock6933
      @davidbostock6933 2 года назад

      I spell cheese cloth "paper towel" when cleaning is involved.

    • @lenzotrumpet
      @lenzotrumpet Год назад

      @@davidbostock6933 paper towel is even worse order from eBay Yamaha polishing gauze it will not scratch your pistons like paper towel does.

  • @richrossirepairslessons3100
    @richrossirepairslessons3100 5 лет назад

    You forgot to do something...

  • @mooshoe1949
    @mooshoe1949 5 лет назад

    🖒

  • @BluzLover72
    @BluzLover72 5 лет назад

    Where did you get the MDRS mount for dent machine? I have not seen that. Would love to get one for mine. Nice vid.

  • @leahlau1591
    @leahlau1591 5 лет назад

    I start middle school next year and decided to take band. (Trumpet) I'm using an old trumpet so this video was really helpful with the cleaning. Thank you!

  • @owenlover
    @owenlover 5 лет назад

    2:22 ;0; that key your adjusting might or may not be uhh kind of umm well bent all on top of the one beside it preventing me of playing any note besides F and G

  • @buckaroobonsi555
    @buckaroobonsi555 5 лет назад

    Blue Juice is terrible stuff. It has too many additives and builds up this nasty blue crystalline stuff. It does not play nicely with other oils so if you run out and try to borrow some oil from someone in the section it often will not work right until you clean the Blue Juice out wash the horn and start over. A lot of guys that buy old beat up 3 valve baritones and tuba's will use a 50/50 mix of Blue Juice and 3in1 general purpose oil. I have seen so many trumpets where the valve stems are glued in place with teal colored crystallized Blue Juice residue.It was a Horn-U-Copia recipe long ago. Blue Juice creates more problems than it solves. The more additives you put into an oil the less lubricity it has because the oil is what lubricates not the additives. At the most you might want to add a wetting agent and not much more. Oil does not interact much with things it is the additives that cause issues based on a persons body chemistry not the oil itself. The most important thing to stop stinking is periodicly cleaning the piston and the bore. Fluiding the horn with oil is a band aid fix for a dirty horn. Junk builds up in the imperfect surfaces of the piston and the bore. When you see oil bounce off the piston or run right off with out wetting the piston or bore that is a sign that those surfaces are deeply dirty or valve oil is poorly designed!

  • @Metal-Possum
    @Metal-Possum 5 лет назад

    Rotating the valve inside its casing is never encouraged. Sure, you just cleaned it, but in the event of some debris, grit, or sharp edges in there, you'll score the valve around its circumference, and find yourself with potentially major difficulties some time in the future. It's good practice to only insert the valve straight in or out, the direction it is intended to travel. If you do score the valve this way, it is much less likely to be a trap for oil and other particles, and if it is, it won't fight against the direction the valve wants to go.

  • @mayramartinez8242
    @mayramartinez8242 5 лет назад

    YESSS THANK YOU SO MUCH

  • @tashia6696
    @tashia6696 5 лет назад

    Nooo audio

  • @blebfleb2303
    @blebfleb2303 6 лет назад

    Anyone know how to sort out mixed up valves??? please respond!

    • @BandPotato
      @BandPotato 6 лет назад

      6 possible combinations ? (aside from numbers on the valves) I played 123 then i shifted 23 132 then i shifted back to 123 and traded 1 and 2 213 231 whichever sounded best was correct UNLESS the valve guide is off on any of them, then you get a fuzzy sound. That's why I found this video, to remember how to do this.

    • @Metal-Possum
      @Metal-Possum 5 лет назад

      Just observe the holes and where they go, and put them into the right valve casing accordingly. I'm guessing because they never taught you this in high school, you never had the mental capacity to figure it out for yourself? On many instruments, the valves are even numbered.

  • @lonzoball5758
    @lonzoball5758 6 лет назад

    What's the tuning slide on that instrument I have i think the same one but I don't know which ones the tuning slidr

    • @Metal-Possum
      @Metal-Possum 5 лет назад

      Sorry to sound awfully rude, but you sound particularly thick. The main tuning slide on any brass instrument is the one that's on the main length of tubing, and not on one of the extensions of tubing attached to the valve(s).

  • @cmccombs23
    @cmccombs23 6 лет назад

    Thx needed that so badly #Bighelp

  • @chipsmash6921
    @chipsmash6921 6 лет назад

    Mine just not making sound at all but I know how to play it

  • @Gator1699
    @Gator1699 6 лет назад

    Glue some leather on those plier's it save you from marking the key.

  • @spicy8710
    @spicy8710 6 лет назад

    What happens if the valve doesn’t click and how do I fix it ? I tried oiling it more, and making sure it was facing the right way but nothing worked. Also, the spring inside the valve, what if it falls out? Is there a certain way to put assemble it back in? PLS HELP ME

    • @duolingobird9244
      @duolingobird9244 6 лет назад

      Rachel Y! You're probably okay by now, but if the spring falls out simply put it back in. If the valve doesn't click in the right place, try putting it in the wrong place and twisting it until it gets to the right place. It should fall into place and you can then screw the valve on. If it doesn't fall into place, you'll have to get it checkout out with an instrument repair shop.

  • @oldtimedrumcorps
    @oldtimedrumcorps 6 лет назад

    Chopsticks wound with soft no lint cloth work great on valve tubes . La Tromba syn oil , best on mkt Lasts long but dont mix and clean off valves before converting

  • @didelox1
    @didelox1 6 лет назад

    thank you so much, my a key was all weird and the angle of the camera hinted me the exact position. Now i don't squeak anymore

  • @thomasma8179
    @thomasma8179 6 лет назад

    5-6 drops? thats a litlle overkill...

  • @ignatiusDOWN
    @ignatiusDOWN 6 лет назад

    I use Hetman's Synthetic, great stuff

  • @abrasal1460
    @abrasal1460 7 лет назад

    Exactly what I need man, except I lost the screw, that's a bill for me now ;-;

  • @torreybrave9836
    @torreybrave9836 7 лет назад

    thank you so much for this! It helped me a lot.

  • @tonypark2601
    @tonypark2601 7 лет назад

    Thank you very much for this video. Very simple yet a lot of information.

  • @vigidriver6281
    @vigidriver6281 7 лет назад

    Always clean a new brass instrument thoroughly before you play it for any length of time. There will be a lot of construction "dust" inside the instrument. Do not mix Synthetic Oil with Petroleum Oil or you will likely create one gummy mess. Choose one type of Oil and stick with it.

  • @dougmoran3340
    @dougmoran3340 8 лет назад

    I don't hear any sound with this video. (Other videos on RUclips all operate OK for me.) The video covers a topic that I a desperate to know more about, as the screws on my tenor needs attention. Is there any way the sound can be added ?

    • @petevasquez776
      @petevasquez776 4 года назад

      Whats the use of showing if you have no sound.

  • @AnthonyUFOLundell
    @AnthonyUFOLundell 8 лет назад

    Hi. this brings up my question; the circular ring part your bending isn't centered on the pin (on my Sax). when I center it, the mouth piece and all is pointing left. is that normal, or something I can adjust?

    • @mr.coolypoody1646
      @mr.coolypoody1646 5 лет назад

      Hey! I've been having the same problem, my octave key faced a certain direction and it was difficult for me to transition from some high notes. There should be a screw on the octave key that you can tighten, try untightening that screw, placing the key in the right direction, then screwing the screw back in. Sorry if that doesn't help

  • @وداللخهودالسيد
    @وداللخهودالسيد 8 лет назад

    لو الطريمة صوتها كاتم كيف أحل هذه المشكلة.وكيفية تقفيل اماكن خروج الهواء من النفس

  • @veganschmegan
    @veganschmegan 8 лет назад

    Great video. Thank you!