Видео

طريقتكم العمل في هذه الحفاره يعتبر فاشله ان حفارات نحن الاكراد في سوريا فهي افضل من تلك هذه الحفاره بكثير

want to piss off your neighbors for a few days? HA!!

18:25 Wow so modern now . Back in the 70s dad wound the derek by hand and level the truck by hand also with bottle Jack's and 6x6 blocks of wood. The truck was a 51 GMC

you are very good business about water drilling to serve the people.thanks you good luck.

poor video quality

What prevents the cable from twisting up into a knot when the drill head stops downward momentum on the down stroke and "unloads" the cable? I assume the cable has a left hand (?) twist that resists the clockwise rotation of the driveline cable? What are the specifications for the drilling cable like is it a LH twist and how many rotations per lineal foot is there? Is there some sort of bevel-gear attached to the end of the cable that is driven off the end of the engine shaft? I know almost nothing about how these systems actually work. There is very little explanation or close-up camera work that helps me understand what I am seeing.

Hope they don’t charge by the hour.

Yeah the good old days

Just before I was born, a well was dug at the hilltop home I grew up in. I was told that at some point, a drill just like this one stopped making that sound while the drill head passed through a cavity of ten feet or more in height. Apparently there was a cave or cavern down there somewhere. The total depth of the well was 175 feet, and I was told the cavity was hit around half way down. It was just one of those neat things about growing up in that house.

Absolutely awesome !!

Where’s the directions?

Looks like Mack and Mya for hire!

Шош там за грунты? Чего сразу стаканом не начять?

Hi . Could you send me the diagram of this well drilling machine

It’s been over 40 years since I’ve been on a rig but I still cringed when the hand put his fingers in the end of the casing as it was being hoisted up. I know it was only a ten footer but….

That was very cool. Thank you for sharing.

The old boy has it under control and his helper still has a buzz from the night before. Welcome to well drilling y'all. I've put lots of pipe in the ground with a cable tool and don't think the rotary boys have any room to comment on this video. You make your mess and we'll make our good wells

You guys always just run 6in no 8in to start?

Can't see what is it that rotates the drill. Cant be a cable, so probably something in drill stem?

thank you for the memories. My dad and I used to drill with a 20W that sits on a Diamond Reo. He has been gone since 2012 and I just needed to hear the old rig run again. You have given me that. Nothing beats an old cable rig.

حفاراتهم خرا

Love your work and relaxed attitude when your both working as a team with this beautifully preserved cable rig. I’m down in Australia and after watching this am really keen to fire up our own old cable rig and start drilling our limestone country for more water. Keep up the good work and post more videos of these efforts. Don’t concern yourself with any negative comments coz there only watching (like me) and not actually doing it real like you guys.

I'd like to comment, but I don't want to sound cruel. You other guys? You don't dig holes you drill them. Painful video. Lol. Good drill bar.

did not those drills still existed

We had one 10 years back the boss sold it to a farmer now that I've learnt more about drilling I wish we still had it all our potential customers have water bound river gravels

Nice 22-W

شغل غلط

I wouldnt hire you based on this video. Everyone is running at half speed.

kurdistan.kobani ..kurdish ..

Damn that there is a stone age way in it

وتسابي 00213796828305

انهم لا يعرفون ان يحفرو صفر في العمل

The hood on that R Model is from the 60's, with a 73 to mid 80's cab. Tough trucks

This brings back so many memories. I believe I was about 10 when I started helping Dad. It was so cool when he started the sputter.

Tengo una igual montada en remolque pero no tengo las herramientas balde barratijera y brocas donde las consigo stay en el salva

Hate to pick on stuff but it's not the rig, it's the way it's being operated. I have 2 of these and operate them by myself - when you work smart, not hard this is a productive and profitable method. I can be set up and done in a day up to 70ft and I've had 90ft days in the right formations. Drive the 1st 6 - 8 feet or more in before you even start drilling - everything is stabilized then and not a drop of mud ANYWHERE. Throw it in gear and walk away.

ran mine faster with less slack. its a bunch of fun when it is solid rock right away, starter pipe like this is used then.Need 20 feet of casing at least, must be 2 feet or more into bedrock 10 inches. neat cement grouted around casing after drilling. worst case senerio is caving sand and cobble. have driven 10 inch thick wall casing 295 feet through these conditions with a big rig coming in behind me to drive 8 inch 400 feet, then 6 inch 450 before getting acceptable water. maryland and every occupation needs a state license. was a master there and south central pa. 30 years.my best rig was one of these. is in haiti now. had six rigs in 90s. scrap metal when worn out. never wore out that 22 though. this guy didn't use 10 inch bit 2 feet into bedrock, and was real slow.drilled 100 feet in 1 day once in 35 years of drilling. most days averaged only 20 feet, maybe. fishing is a bad word

I WOULD HAVE SENT YOU GUYS PACKING. THAT RIG IS AN OLD (AND I MEAN OLD) STAR DRILL RIG MADE OVER 70 YEARS AGO FOR BLASTING HOLES. IT WAS MADE BEFORE HYDRAULIC MOTORS WERE INVENTED AND ROTARY DRILLS CAME TO BE. IF THE PRICE IS RIGHT AND THE WATER NOT TOO DEEP I GUESS IT WILL WORK WE SHALL SEE..

تنقيب.ماءالجوفيه0615955645

👍👍👍👍👍👍👍

How come everybody drills on level ground except me. That’s a walk in the par😒

Those old cable rigs were the berries in their day my dad had two wells dug that way!

Hi great video im looking for a modle that can reach 200meters with 12 inch stem i know a 36BE CAN can a22 .any advice i live in mexico most are 32 /36 any advice. Im prity good at finding water even hiting depth by 1 meter. Im working whith the guy drillig my wells. But his bos pays 10 us dollars per day.any advice on modle machine. Thanks..

I am working on this well driller in Algeria. You work very hard. Let the pitcher descend to the ground and place the tube so it is easy to work

This is the best drill rigg on the planet. Im a operator. I took it to west africa. It was the best time i had using this rigg. The experience was unforgettable. Im making plans on doing it again. Thanks for this video. Please do not take it down. Im using it as a presentation to display for my investors. You guys did a wonderful job.

This is ridiculous. A drive clamp? Before you are done with the stem guid? Cmon now. Use a slightly bigger bit. How slim can can make this hole? Why no perfs? Wt fuck is wrong with y'all?

Tough start to the hole. I heard you say the start of the well is the slowest and that is the truth. Especially when you are dealing with rocks and cobbles. Starting straight with cable tools is imperative. I've never used an internal drive head, and after seeing this I don't think I ever will. I'm not big on getting my clamps muddy. Geology is a big deal. A rig like this with enough water and a sand pump baler, can complete a screened 8" well 100' deep, in a day, in sand. A top head mudder can't do much better, and will make a lot more mess. I know cause I've done it. Years ago I watched a couple of young guys put in 100' of 8" casing through soft clay in 4 yrs with that diameter drill stem, a 6" bit, a 6" baler, and that model drill. I've done 80+ feet of 4" through marl in a couple hrs and half that time was welding pipe. I usually figure an average of 50' a day in the drift. Some days more, some less. A man elevator with 20' of travel for the assistant helps. Best I ever did with cable tools was 180' deep screened well, drilled, test pumped, and owners pump installed in two days. Best I ever did with top drive rotary was a 450' test hole with bagged samples every 5'. I once put in about ten 2" 30' deep wells with hollow stem augers in about 2/3rds of a day. You can complain about the speed of cable tools, but that's it. The wells are generally straighter, and you KNOW when the sand/gravel/rock is wet. What we have here is labor intensive. How much gas you got in you? And can you stay out of trouble?

I NEED TO BUY USED RIG PERCUSSION MODEL RUSTON BUCYRUS MOUNTED IN TRUCK THE PRICE IN DOLLAR TO MOMBASA - HOLILI PORT PLZ GIVE ME A REASONABLE PRICE AND AFFORDABLE ONE.

In response to the thisisme0214's comment, of course there are faster rigs and faster ways to drill water wells. But I defy you to find a straighter way to drill a hole. Also there are some formations where a rotary rig cannot drill. I learned to drill with a cable tool in '77. It was with a 29T Bucyrus Erie. Quite the monster.

What a joke. I can drill faster with a 10 horse engine a mud pump and some 1-5/8 pipe with a home made bit