Видео

i just ordered it on line don't remember web site measured from rail to bottom of boom and then width

@@markssailingvideo5989 Cool. Perhaps I haven't been looking in the right place.

i think i have one on their for the toe rail cracks.. I only had to fix the flat spots that were lightly cracked not to bad so was able to sand gel coat down if its in the textured part their is no way to fix other then to sand texture off lots of labor.. i have seen some people for the flat section use heavy buildup primer then sand but cracks sometimes come back... a few small spyder cracks like by the mast step can be ground out and filled then sanded... the endeavor 32 deck were really bad for cracking have a friend with one no fix just lives with it

@@markssailingvideo5989 what material do you use to fill cracks? thanks.

@@docjeffry if their are just a few grind them out and use new gel coat its only the gel coat that is cracked in most cases

I think it was spar varnish bad memory their is a video on it

sold it 3 months ago to some really nice folks by dallas tx and i am sure they are loving it I just have a hunter 28 at present

Hi I have the same color C 22. Mine need to be painted. Do you now where can find the paint for the light blue color. Thanks

seems really nice construction and easy to install not sure how it works just sold my boat a couple of weeks ago

@@markssailingvideo5989 so 2nd happiest day of your life? Getting out or changing vessels?

@@darb4091 no not really liked the catalina just did not need it right now have the hunter 28 and truthfully I think enjoyed the challenge of the refit more then anything else back on the web looking at next trailer sailor project

How do you like it after a year or so?

sailrite ultrafeed LSZ-1 does straight and zigzag i have gone thru 4 layers of sunbrella material with no problem goes thru plastic window as well they have different thead i use T-90

should be under deck and or hardware give them a call

@@markssailingvideo5989 Thanks. I found them. Had to use chainplate instead of chain plate.

its fair - being a shallow shoal keel its a more stable ride then a fin keel compared to my catalina 22 with more of a fin keel which points much better but vic has less up and down bobbing due to its keel weight being distributed from bow to stern

never have seen one but its possible since their is no rigging on the pop top but it could not extend out pass pop top edges because cleats and wenches are or right their on roof top unless you pushed it in front of hardware but you could go to sail shop and have a dodger made that went from bimini to pop top

@@markssailingvideo5989 I`ve seen a cover for the pop top when it`s up. Sorta like an all encapsulating tent over the pop top. Looks like for camping, and such. I guess that might serve as a basis to start from. Thxs! BTW that`s a great looking Catalina 22 you refurbished. I like the color.

@@markssailingvideo5989 www.catalinadirect.com/shop-by-boat/catalina-22/canvas-covers/pop-top-curtain-c-22-lt-85wscreens/

@@Nick-zz6xl could be then you would just have to add wings out the sides will limit access to bow most guides recommend not to sail with poptop up

the windows " glass are original calatlina direct has all the new gaskets if you have a broken window take the frame to local glass company and they can cut new piece

i dont even remember the inside not much

loved the vic great 1 or 2 person day tripper unless your tall nice long cockpit but benches are low for tall people.... double check chain plates and add thru bolts will never have a problem

bought it online just gave my own measurements sat in boat and just measured head room from edge and then across dont remember what site

I have the same boat and the same question!

touch base with me i can give you some insight should be a pvc homemade roller furler two little gove boxes under bench seat large back hatch loved that boat supper easy to sail

my cell 832 310 9357

The first message was from my daughter's computer lol

@@smcommander5434 have any ??? on boat feel free to contact me

@@markssailingvideo5989 I do have some questions. I tried calling the number that you listed and what it come up as some girl and said Mark Crawford did not belong to that number so I listed my number. If you would give me a call please sir.

yes most none commercial machines have plastic gears will not go thru 4 layers of sunbrella or plastic window very well have only every broke 1 needle just has the torqe you need

outside on trailer blue was sprayed with a wagner power painter ,, topside was brushed

How did it lay with the Wagner? Do you think its a better finish then roll and tip

yes with reducer added it lays like glass and is fast if i had compressor i would have used clearcoat gun remember paint is only for color not a filler so prep primer then wet sand before color is the key

material left over from hunter project i believe sunbrella was $24 a yard at 48 inches, base material around $12 a Yard 1 yard for blue 1/2 yard for base material so about $36.00 per cushion small back cushions even less... sewing machine !!!! but worth every penny

@@markssailingvideo5989 ive been heari g that the cost of cushions is expensive. In considering DIY. Thanks for your response!

@@abelzoni2138 yes can be very expensive if you have foam watch sailrite cushion video on utube then buy cheap material and do a few practice inside cuchion do not need to be sunbrella

it did sit in my shed for 2 years first... have free access to a 28 hunter so was not really exited either about the work she just kept calling me every time i went in the shed, once i started its not really that much work

1 quart will do hull with no problem 1 quart for top side smooth 1 quart for textured section tons left over

I had a Vic loved it check out my vids on it just no room for two boats supper boat to learn on