Видео

Good work I Like the New Intro

It's Never Easy But is Usually Worth the Effort

It's Never Easy is it?

Good Progress Things are coming along Nicely

QUESTION….I Have an 67 Chevelle that I want to install a one piece gasket on the oil pan. Because the crossmember is in the way from dropping the pan is it not possible to work the gasket around the outside of the pan? I see in your video you push the gasket through the pan past the oil pump. Any thoughts on working the gasket around the outside of the pan…? Any thoughts would be appreciated thank you.

442 is Progressing Nicely Tnx for sharing the ride too

Dang I was really hoping that this video would show our vehicles. We were that green truck to the green Challenger right next to that last car that you showed the Camaro. We had those five cars

Thanks for taking us along "Due to Technical Difficulties Beyond our Control"

Looking forward to when you Figure it out which I am Confident you will

The mobil 1 doesn't meet spec if that means anything to you...i will use oil that meets spec for sure during the warranty period. You can get a mopar filter from genos garage for 62 bucks. Also, not gonna use something that doesnt meet specs while still having warranty...maybe that's just me!!

As Always Thanks for taking us along

Thanx for Taking us along Ford and I tend to share your taste

my local dealer charges $315.00 for a ecodiesel oil change

Replacing All the Wiring may not be cheap & it is Time consuming But its will definitely save you hours of frustration in the future PS I remember when GM Division Engines were all Different

SO, Rookie (or Dumb) Question Why not just use the Whole New Floorpan ? Too Much Work?

Good job if I attempted that I'd end up Bleeding and have Non-Family Friendly comments

Enjoying the Build Looking forward to the Final Product

We’ll be there this year

Glad to see you back !!!

Any videos on how to check the logs for why My car was stalling out while driving, then it starts up again but runs rough for a few mins then is ok. Seems like a fuel constraint maybe or something with my Sniper.

Hopefully I can update using my MacBook Pro?

Hola. Do you have any ideas why I don't have spark? Everything works,I have rpm. The white wire has a power distributor rotate. I think it is the ecu.

Thanks for Taking "us" to another Car Show Congrats to you & Jenna The VW "Thing" was based on the WW2 German Kubelwagen

I hate to be a hater. But compared to the holly video.This was a joke. Plus this video is from 8 mouths ago. Your not even Uploading the 2.0 and 10 mouths ago they came out with 3.0. For those that found this helpful bully for you.For those that didn't just go to the holly site. I've never even turned a laptop on before and it was simple for me. Why am I here? Wondering if I had to resave and rename tune to go from 2.0 to 3.0

Sadly i have one of these pos trucks. Had no idea about the issues they hace until well after i had it a while. Bad crankshafts, main bearings spinning...... Mine is a 22, got it in April 2023 new (that should have told me something), and its not my daily driver. I have a small car i drive to work. Truck now has just over 3500 miles and i got 4 free oil changes when i bought it. Dealer says oil change intervals are 10k miles. I laughed. Not on my truck. Not with the known issues. 3000-3400 max. Thankfully i have those freebies because as of today an avg oil change is just under $200 if i do it myself. Ridiculous.

nice video. However, made the classic mistake regarding the oil filter. Canister oil filters that are on top, should ALWAYS be removed or loosened first, before draining the oil pan. Because all the oil from the filter housing has an anti-drain feature (eliminating dry starts). Once you loosen and remove ALL the oil in that line drains into the pan.

Why didn't you save your most current tune off the sniper before pulling you card out? If you install the update it will write over you current tune, I saw you had a sniper file but that wasn't the most current file that would have been in your sniper.

You have to have discipline and put the tools back after each job. Even if you're going to use them again, but you create the habit of putting them back.

Best place I've found for that stupid filter is diesel filters online, a place in New Jersey. 66 bucks shipped, about half what the dealer here wanted. Very aggravating that two part filter that costs likely less than 10 dollars to make is 120 bucks at the dealer. Does the 5W40 Mobile One you used meet the MS12991/API SP standards? It is not on the list I have. Just wondering.

I'm late to the "Show" But I Always Appreciate you taking us along to Car Shows

Hi. It seems you only updated the firmware on the handheld but not on the ECU. According to the instructions, after you update and reboot the handheld you should navigate to the ECU HW/FW button and upgrade the ECU... Please correct me if I'm wrong.

Hi Kamas , how you rate the filter ?

What headers are you using ? Thanks !!

I'm about your dad's age and all I know you two have very good taste. I have several cars and yes you two have really good taste!!!!!!!!!

Looks like a C-clamp 😮

Air hammer, literally 1 seconds a stud

I recently bought a 2023 ram 1500 ecodiesel so the oil filter and housing being molded into one. Do you recommend a replacement brand? please lol. Also I crawled under mine and see a nut molded on the fuel filter housing. I assumed the bottom un-screwed like the oil filter but sounds like nope?

Its called a plasma cutter.

Drink a quick beer and apply a second coat and I think you’re golden. I usually paint these vertical vs horizontal to keep the dirt from settling on flat surfaces

You mean the orangepeel or grainy finish or different directions

Not too shabby tbh

Looks good! Now I'm trying to be funny.... Cut to a shot outside with a black car on the street with paint over spray on it. 😂

What do you suppose is on the update(s)? Anything noticeable with tuning or drivability?

Also save the filler neck off you DEF jug it will fit the oil jug too

What? You read the labels and instructions on things? Whats the fun in that, thats cheating!!! :) Your gonna give the rest of us a bad name, if ya keep that kinda nonsence up... Thanks for showing the headliner installation proccess, I always wondered how it was done. Pretty cool. Thanks for sharing :)

Have a fine winter Gentlemen. Look forward to next spring. If I'm not mistaken, y'all plow snow during the winter? If so, could be fun to see some of the troubles you find yourself in. Keep at it, thanks for sharing with us.

Kingsville TX janky fuel Vick's Tire 6th street Kingsville TX 78363

4 1/4

This was more helpful than volleys own video form five years ago thank you

Yeah ya missed one buddy