Видео

Hi there. Those look like a really good size. I was wondering how much you are able to sell them for? Thanks

Building two of these benches this week for our fire pit in our backyard, planning on putting on a light brown wood stain with a spray on polyurethane top coat just to weather proof a little bit. Hopefully should come out pretty good, Nice job on the arms, may need to add that to my to do list

I want to make this bench for my kitchen, can you tell me what height of the sear is from floor to top of seat board, would greatly appreciate it, TY

easy peazy lemon squeezy. Nice work!

That is what I did to my shop . After all was done I then put in a Senville mini split that works great .Makes these 100 degree days more enjoyable to go out in the shop and work .Good luck .

Love this, thx

Could you use the cutoffs from the back to make the arm supports under the cup holders?

I know that you placed the angle finder so the camera could see it, but it really needs to be perpendicular to the saw blade for accurately setting the blade.

Nice.

Great video

If you are using an 8' board and you cut 2' off where do you get the 32" piece.?

I made a few of those in the spring, no one bought them and I wound up giving them away a couple weeks ago.

A CLEAN shop is a safe shop!

I like this build. I saw the one Rouge built. I see yo have every scrap that you ever made, just like me. Who says you need a neat shop?

Thank for your videos on this bench, really like the explanation as you went along. So I saved the video for a future project. really like the modifications you made. By the way I'm jealous of your shop space, My space is only a 10 x 10 shed. One day I hope to graduate to a bigger space. Keep making videos you do a good job all around.

where did you buy the fence?..all of them on ebay and amazon are china knockoffs..only difference is they dont have the kreg sticker

With the speed square (at 3:05) all you had to do was flip the square over! The other side is a 45!

Nicely Done! Very Nicely Done!!!. I loved the regular guy approach to this. It was great when you said to make a measurement and a cut you pointed to the actual end and point of the board to reference when so many others I've seen just blab "cut 10 inches from end". I'm like what end, what point? Nice bench. I will try one, you 30 mins, me 30 days!!! I might round of that corner at the top of the legs and I think raising up the 2 back rest pieces a few inches so that you can put a curve or curves on the top board which would give it a different look. Maybe even some scroll cut out designs in the back rest pieces. Just my 2 cents, easy for me to say after you had built it. Nicely Done! Very Nicely Done!!! Thank you!!!!!!!

Thats a good project that should sell well Thanks for the video.

Very nice , that looks great .. My wife just informed me she wants me to make her two chairs like your bench .

How long are the corner supports and the top trim

My bandsaw & table saw both have aluminum tops, makes it real easy to keep the rust off.

1. Your shop makes my shop look clean. 2. I just built a similar mobile planer stand, but mine looks better. 🤣🤣 3. Love the upgrade to RE’s bench. I was planning on building his, now I’m planning on building yours. You need a bit of practice on camera angles, etc but otherwise a good video.

I bought this fence couple years ago absolutely love it

i spent a few thousand hours running a bandsaw ... 200 grit sand paper to polish the table and apply 2 or 3 coats of Boshield T-9

I do the same thing to my table saw top . I use one extra step before waxing and that is bar keeper friend . It really helps to clean that cast iron .

where did you get your set up blocks?

That’s a nice upgrade with the armrests and in my case beer holders, great job running through it for those interested in building

Thanks for the video, very entertaining and informative.But, lol, this 60 minute build would take me about 60 hours and I know it isn't as easy as you make it look. That's why I love watching the vidoes and letting you guys do the work. I admire all you fellows for your talent and keep up the great work and videos. Thanks again.

I bought what they call a small pet tent and sat the rear of my miter saw in it. Captures at least 95% of the dust and is flexible enough to pivot for 45 degree cuts. If I remember it was about $20 on amazon. Once every couple of weeks I suck it clean with a hose from the central vac. Good part is my saw is on a rolling base so the tent just comes along.

I haven’t used my oscillating saw (multi tool) for years. Thanks for showing how you use it.

You rock partner!!

Very nice , like how you explain the details . The only complaint I have is that I did not find your site sooner .

Thank you for putting this together. Love the bench and you make it look so easy. I'm sending this vid to my hubby as a hint to make it for the front porch. Thanks again. Great video.

Nice project and nice explanation.

Kinda like this bench. It's different and looks like a fun build. But... may I suggest one thing? On the cupholders, cut out 2 or 3 inches into the support. As is, you have 1-1/2" to sit your beverage. Fine for a coffee cup but disastrous for larger containers.

Always going to be critics in the comments. Ignore most. Great vid

Preassemble you legs and then attach them to the corner during your assembly. Makes it much easier.

Matt you should of told me I have an old school one that you can take the top off of and has the separate inserts I ain't using it for nothing lol

Could you give a material list or cut dimensions first so that we can screenshot it? This is the first of your videos that I have seen. I look forward to making this and watching your other videos !! Thank you

Miter cut not bevel

Is there a reason why you are “pulling” the miter saw blade vs. bringing the miter saw out, plunging down, and then “pushing” the blade to finish the cut.

Do i have to gain 50’lbs to make this ?

Thank you so much sir, for making a video for the beginners. Your explanation and the demonstration of how things go is such a blessing blessing to someone like me. I've been injured on my job and trying to find hobbies to do but not understanding the tools and how to use them but you have made it where a disabled person as myself could at least follow your instructions and make something

Surely you know that the “speed” part of the speed square is that you don’t have to pivot for a 45…? I was actually shouting at you 😝 JUST FLIP OT OVER! great vid though. I made two in the 30 minutes just by batch cutting extras.

NICE

Looks great. How long can the seat & back boards be cut before a third leg is required?

Brad nails. Not air nails

You really shouldn't claim this the sturdiest on RUclips. The way you assembled it was way harder than it should have been.