Видео

thank

Where did you come across the alumminum at?

Good 🙏🙏 subscribe Karen aur help Karen

Hey can I ask which brand of tab-wires did you use here? Why it can automatically stick on the surface of busbars without soldering Sn/Pb wire?

Thank you very much, I like very well

What is the size of spacer is it 1/16 or 1//8 or more in this video

Question: What is the density of Qsill? I need to mount cells on the inside of a vacuum formed convex acrylic sheet, so I wonder if water on top of the plastic bag sheet can be used in place of the fiberboard used in this video to apply light pressure and prevent the Qsill pooling in the middle of the panel?

Congrats great panel... Anyway, hows the resin encapsulated panel performing in yr 2020 ?

I ordered a kit a few years ago and am just getting around to building it and I don't see anywhere in your videos that explains attaching the junction box to the panel as well as attaching wires to it. Can you advise?

very accurate plans for something like that I found on Avasva

Why not one red wire and one black wire instead of HDMI cable?

you medded it up with that plastic , let it dry by itself

USB not HDMI. Small slip up. Thanks for the demo.

The tab wire moves in all directions when you try to solder. It's not that easy.

Most Platinum based silicone is 10:1, but there are other ratios. Most importantly, never use platinum based with anything that has been used with tin based silicone or chlorinated rubber, as it will never cure properly. I would assume that means cleaning all of the flux off of all the solder joints so that organic tin does not come into contact with the silicone.

What is Eva?

Great place to learn how to make it yourself much much cheaper. Just google for 'Avasva' website:)

I made it by myself. I used Avasva solutions for that.

Curious as to how long it lasts in the sun. Isn't the qsil (and glass) way better?

Instead of TPT, what can we use as subtitute?

Make it yourself thanks to Avasva solutions. I think it's the best way to learn how to build it in the cheapest way.

Xx

HDMI Cable?

amazing

Just order one from ebay for a 8€ and youre done.

im sure you'll build it yourself. I made it 2 weeks ago thanks to inplix website.

Nice work, what would the cost of a panel like this go for going this DIY route?

very nice vid, thanks, motivated me to keep learning proper tabbing wire soldering

Nice movie. I am using inplix instructions to made it and I did it already :)

Great

very good video

If you want to make it too just use InpliX handbooks.

what kind of glass are you using?

Many thanks for this video : this is the first one I see that shows this way of dispatching the silicone. It looks to be the best solution to me.

Paul Martin Is it possible for the encapsulation to seep between the face of the cells and the glass or doesn't it matter?

Hi Mark, Looking at the back side of the cell:-I am using flux pen.The right line was taped well and the middle line all 3 small strips were not tapped. I tried again . not tapped. I tried with a new tapping bar, still not tapped and now the three strips in the middle line are look like burned and black in colour. I did not tried the left line yet. Is there any way to clean the black line? or the cell is still good to use with left and right lines are tapped?

is there solder on the wire??

Will this work on repairing broken panels?

Thank you for posting this. You can read all day but nothing beats actually watching it done. This helped me understand the process A LOT!!!!!!!!!!!!

All cell phones I have tried have built in charge controllers.

Great video. It might not be necessary but adding in a diode to make sure discharging doesn't occur when cell-voltage drops could be helpful.

Thanks for the instructions . Very helpful.

I found this video to be very helpful. Thanks for posting it

I have bought solar cell DIY kit couple years ago, but never made it because that encapsulation stuff was so expensive. I checked again after watching this video. Prices were still way too high. I could buy ready made panels with the price of that liquid only! Ridiculous. :D Do you know (much) cheaper alternative to QSIL 216 or other "official stuff" that is made for this? Seems that I can't never ever complete the kit if price is this high.. at least when shipped to finland. Checked from EBAY several encap. liquids and they were all out of my range, if not the the stuff itself, but after adding 30-50 EUR shipping costs they were.

Hi Mark when you say face I assume you mean face of the cell? The gap between the cells is so the wire can go down to the back side of the next cell

Couldn't you tin the face of the solar panel, then lay down the tabbing wire onto the face of the solar pannel, without a 1/8" gap?

One thing I don't see performed is the preparation of the electrical leads to be connected to a solar installation system. Can you please provide this information?

We are providing new frames now that solved this issue available at americansolarsupply.com and on ebay. We also will be marketing a new kit in the next week that uses EVA. Ive been working on the best method for curing EVA in the home, school, and lab environment. It will be a 15 volt 20 watt kit that will fit in the oven. Normal build time is 2-3 hours. I am working on the video right now. Please visit our new sales sight as we are re-building the company from the bottom up Americansolarsupply.com.

Great video guys! One minor criticism - you spent so much time perfecting this process, but I noticed that your frame looks a little too narrow, it appears that the edges of the solar cells will be shaded by the aluminum frame. don't want to be picky, and I will be following your advice on my own DIY panels... Thanks again!

very good video, thanks, but, When do it is used the EVA FILM?