![Aurelio Bello IZ8EGM](/img/default-banner.jpg)
- Видео 62
- Просмотров 54 102
Aurelio Bello IZ8EGM
Добавлен 15 янв 2013
Raccolta video di autocostruzioni di apparati radio QRP e prove di ascolto di apparati radio commerciali test di antenne e accessori vari hamradio
Видео
Xiegu x6100 good reception of low signal near strong signal of 3 khz
Просмотров 6402 года назад
xieugu x6100 firmware 1.1.5 serial number maggio 2022 good reception of low signal with a strong signal near 3 khz
Xiegu x6100 power output
Просмотров 9762 года назад
Xiegu x6100 power output su carico fittizio alimentazione 13,6 volt firmware 1.1.5 serial number maggio 2022 modalità FM, in ssb ce un pò di differenza ossia 10 e 6m modula benissimo sulle bande basse diversa potenza banda per banda
Xiegu G90 updated at 1.74
Просмотров 1,6 тыс.4 года назад
Xiegu G90 updated at firmware 1.74 beta version from this site radioddity.s3.amazonaws.com/G90_MainUnit_FW_V1.74_build002(Beta06).zip there are two version of firmware this from radioddity is fine and working very well
Xiegu x5105 vs G90
Просмотров 3,6 тыс.4 года назад
Testing xiegu x5105 vs G90 same vertical antenna and rfgain at 50%
Presentazione video xiegu x5105 rtx qrp
Просмотров 1,6 тыс.4 года назад
secondo video dove video presento lo xiegu x5105 in alcuni modi operativi tra cui cw e ssb e digitali con il decodificatore incorporato
Presentazione xiegu x5105 rtx qrp
Просмотров 1,5 тыс.4 года назад
Video presentazione dello xiegu x5105 qrp 5w seguirà video con prove on air nei vari modi operativi
Belka-dsp receiver
Просмотров 7904 года назад
Listen CW mode with belka dsp receiver so quite and good filter
Belka dsp receiver
Просмотров 1,7 тыс.4 года назад
Testing micro receiver Belka dsp with internal loop antenna MLA-30
K3 Elecraft kill the noise from russian radar
Просмотров 2874 года назад
K3 Elecraft kill the noise from russian radar
Icom 7300 vs K3 with new synth board on ssb
Просмотров 3374 года назад
Icom 7300 vs K3 with new synth board on ssb
Icom 7300 vs K3 with new synth board on cw
Просмотров 4834 года назад
Icom 7300 vs K3 with new synth board on cw
Icom 7300 with N1MM software for big spectrum display
Просмотров 7856 лет назад
Icom 7300 with N1MM software for big spectrum display
Not much between them, except the noise floor of the 703 seems higher.
The cost of k2 was highter than icom 703
Ottimo rtx ma se si rompe addio.
Vero del resto come tutte le radio dello stesso periodo per cui i prezzi dell usato sono fuori quotazione
IC-7300 rings in CW.
Yes the k3 is an upper radio on cw
nul
Ciao ho un problema con questo apparato. Ho acquistato una diamond per i 10 metri veicolare e in cw durante la linea mi indica swr e durante il punto invece no: perché????
Ciao. io sul mio 6100 nuovissimo in 10mt ho la potenza bassa, circa 2,5 watt in batteriea, e 6 watt massimi con alimentazione esterna, provato su carico fittizio.
ci sta che il finale dia meno potenza in 10m, però ti consiglio di fare test usando il cw e non la fonia che potrebbe ingannarti se non hai un wattmetro pep
@@aureliobelloiz8egm627 grazie, avevo già effettuato diverse prove con wattmetro pep cw ecc. tuttavia la potenza massima in 10mt è quella descritta sopra. Per curiosità me lo sono fatto sostituire e la potenza effettivamente è la stessa... quindi confermo che è questione di hardware o progettazione ecc...
Col decodificatore e una figata credimi.anchevse pochi italiani
Salve,questa radio ha già la modifica per espansione di banda? Grazie
SSB ?
Nice video fratelo!!! Grazie!!!
thanks Aurelio 73 fantastic video from kb2uew
Hi i see you testing the output power , this is good output, can you please tell me the Batch number of your radio, it is printed on a label on the box, Thanks Dave 2E0DMB
hi Dave the number is W1201, Do you have more different output power? 73
@@aureliobelloiz8egm627 Hi thanks for getting back to me, I had a x6100 some months ago, and 40m was only 3w out on the battery and 6m was under 2w, the firmware Batch number was different than yours, as there has been good firmware out I got another one a few days ago and the output power was the same as yours, But I have to send it back as the speaker has died, it is distorted from low to high volume, There are picking it up Monday, so I should have a new one Thursday Thanks Dave 2E0DMB
@@aureliobelloiz8egm627 This one was b/n w1601 Thanks Dave
Con un po'di fatica 😁😁👍👍 questi trasmettitori in qrp sono proprio belli
no tx rf
Sei riuscito a fare qualche qso in fonia?
ciao certo con ottimi risultati, ho fatto diverse uscite per attivare i siti archeologici, ho avuto sempre un buon riscontro
@@aureliobelloiz8egm627 Grazie Aurelio! Che antenna usi, per curiosita?
@@tommasocastelli91 vari tipi ce uno stilo della mfj da 5,5m su bobina che si cortocircuita per trovare la risonanza che va molto bene ma devi mettere almeno 4 radiali. Per il qrp l antenna deve essere valida ho anche una mp1 ma non è il massimo
I have one of these. If you unscrew the antenna top you'll find a small metal biro pen inside. My SB2M puts out a measured 498 milliwatts PEP. Despite the low power, I've managed a contact from the Purbeck hills, Dorset, England, to Majorca using a 11.5 wave centre fed wire dipole strung between 2 parked motorcycles, back in 1994.
mine is a little bit instable on frequenzy but i think is normal with this vfo system
I love my Belka-DX receiver, even bought the full battery speaker kit for it later,. a DX machine with just the telescopic antenna and can handle my ampilled loop too.
Enjoy it 73
ssb? ten tec /icom ssb ? test
I am sorry but the icom is on the other desk 😃 73
Nice QSO! 73 de KN4KAW
L'accordatore automatico è integrato o bisogna comprarlo a parte?
È di serie, la radio non prevede optional è già tutto a bordo anche la batteria
Buongiorno Aurelio e grazie per questa recensione, ho trovatola radio ottima per il mio utilizzo senza spendere una cifra,un informazione, l’accordatore è entro contenuto perché non riesco a capire dal l’audio,ancora grazie e 72 da Ik1mso
Si è entrocontenuto ed è veloce ed efficace, per essere un rtx cinese devo dirti che è molto curato
@@aureliobelloiz8egm627 grazie sto valutando di acquistarlo sembra un ottima radio e molto robusta. Buona Pasqua a te e famiglia
@@lucacozza1757 ti consiglio di prenderlo nuovo, anche perchè se in Italia hai due anni di garanzia se in Cina tramite radioaddity hai la sostituzione in caso di mafunzionamento, se lo prendi usato fai caso all unico difetto noto ossia test della radio in ricarica da spenta alcuni esemplari presentavano il difetto di un ronzio nel suo altoparlante, difetto per il quale la casa madre riconosce la sostituzione del prodotto 73 e buon divertimento
Beautiful Radio the k3. I have the new synthesiser board in mine. Amazing.
On ssb the difference are not easy to understand but on cw the K3s is a war machine
Good evening, I would like to open the station in 11m. In Romania we use the CB band for free, on trucks. I can't use xiegu x5105 in 11m. Can you help me with this problem?
a sti prezzi comprate roba seria,naturalmente comodo per attivita esterna grazie per i video
Per avere le stesse funzioni devi comprare un kx2 elecraft che tra accordatore e batteria siamo sui 1350€ quasi tre volte lo xiegu. Ti assicuro che è robusto e ben fatto ha un buon ricevitore supereterodina!
Which one is better for portable CW if use both with power output 5W? Also X5105 sounds less noisy and with better AGC.
I like too much the x5105 is a very portable qrp with a good receiver tradictional proget so quite
Ciao Aurelio volevo chiederti dove lo hai acquistato mi piace molto lo vedo ben fatto rispetto ad altri Grazie IZ7QUC ANTONELLO
Ciao Antonello è molto robusto e la batteria dura tanto probabilmente è il più ben fatto qrp portatile presente sul mercato io lho presi usato su Arifidenza. Ps per un acquisto usato tieni presente che alcuni serie soffrono di un difetto per il quale l azienda prevede il rimborso o la sostituzione, durante la ricarica della batteria a radio spenta il difetto consiste nel sentire un fruscio nell altoparlante. Nel mio questo problema non c era purtroppo non so darti indicazioni su quali serie ce il difetto meglio sempre fare un test 73
ruclips.net/video/05L_2HEQglk/видео.html Новая модель Belka DX 1.5- 31 MHz
Good!
Ciao vorrei un consiglio, conviene spendere intorno ai 450 euro per questo G90 nuovo oppure intorno alla stessa cifra per un usato tipo yaesu ? grazie scusa il disturbo
ciao il convenire è un fatto soggettivo, il g90 è un sdr con un buon ricevitore 20w e accordatore, lo yaesu di cui parli ha queste caratteristiche? anche il g90 potresti trovarlo usato e spendere molto di meno. a me è piaciuto anche se non lo posseggo piu lo sostituito con un qrp molto piu costoso l FDM DUO ma parliamo di altra categoria!
Complimenti interessantissima recensione , decodifica anche il CW ? Grazie 73 Franco IV3HBY
si certo decodifica anche i segnali psk31 e rtty oltre il cw
In the 11m lane, someone managed to open the station. and how did you do it. Thanks 73!
I could see that the display of the X5105 is updating much slower that the G90. But I still like X5105 a lot more. Could you tell me some more disadvantages of X5105 comparing to G90? Thanks a lot!! DE YO8UFO
what is antennae?
Se stringi molto il filtro cw scampanella ?
Ciao a distanza di qualche anno hai ancora questa radio? Cosa ne pensi essendo economica?
non è più nella mia stazione da molti anni ormai ma ricordo che aveva un buon ricevitore se la trovi ad un prezzo accettabile prendila però tieni presente che a 1050 euro nuovo prendi un 7300 che è molto più innovativa di questa, diciamo che un prezzo decente di acquisto usata potrebbe essere 600 euro altrimenti vai sparato verso un 7300
I want one!
Where is soft 1.74 available ???
its available here facebook.com/groups/578581345625251or here xiegug90.groups.io/g/main/topics
@@aureliobelloiz8egm627 The link provided on the forum with the new firmware does not work, can somehow share it? And I don't have Facebook and I don't want to.
@@igorelectronicselectronics5838 there is this link but you must subscrive to it xiegug90.groups.io/g/main/files/G90%20Firmware%20V1.74%20041420
Impression: 1.74 is definitely an UPGRADE. FFT scaling looks good and seems to be more responsive (starting to look what "right should look like"). RF GAIN needs less sensitivity and the ability to adjust in greater increments. With the speech compression / power fold back issue resolved, improvements on mic gain can be made to the degree to adjust in greater increments. CW pass band filtering is now automatic to 500 (simply change the operating mode to CW or CWR). 73s DE John - AG4KN
i think with firware 1.74 the fft is really improved and the color green is more readable, but on tx i see problem with compressor and there is a wrong swr picking at the end of trasmission that can reduce the power. it can be improved i think
@@aureliobelloiz8egm627 I haven't experienced the wrong SWR selection issue yet. I did change the SWR threshold from the 3.0 / 1 to 2.0 / 1 and haven't seen any issue... yet?!? 73s.
Ciao Aurelio di quanto è l'autonomia della batteria? Se hai avuto modo di testarla. Graqzie Marco in3ufw
Almeno 5 ore alla massima potenza e con uso intenso
Perfetta recensione con due video ben fatti. Grazie Aurelio, 73 de IK2RGV
grazie Stefano 73 de iz8egm
So do you like it?
MatthewJay L yes i like it very much because is so little 95gr e more sensible, i can use it indoor with your telescopic antenna. Good quality alluminiun case etc etc
73 de PY5CL
73 too de iz8egm
You aren't centered on the passband on the K3. The CWT is shifted to the right. It will be even better if you center.
Yes, if you want the number of difference go on sherwood list the K3 is on the top of the list from many years the 7300 is a good entry level but isn’t a top radio
Superior Ten Tec front end, so back off the RF gain, it's at 100% there. Ten Tec far and away superior radio.
Sputnik hi right, but the radios are in the same conditions, also icom 7300 have a good rfgain control!
You've got a good point with both at 100%. Gain, bandwidth and skirt adjustments will put either radio on my top shelf!
@@aureliobelloiz8egm627 the 7300 dosn't have a RF GAIN, it's just a variable attenuator in front of the ADC, so the noise level stays the same regardless of it.
Have both radios, listening to Orion vs 7300 for SSB is like listening in a quiet room vs a very noisy restaurant. Love the 7300 transmit audio, so operating using BOTH radios, best of both worlds.
Thanks for the video Aurelio - very interesting...
Don R hi thanks the sound of 7300 is very clear
@@aureliobelloiz8egm627- Yes excellent audio on both radios. However the touch screen, better video resolution, and faster refresh speed on IC7300 makes Orion seem very dated. I was disappointed with Orion screen from the beginning so never bought one myself, even though I am a huge Ten Tec fan. Thanks again!
The frequencies of the radios are different. IC-703 = 14018.05 Elecraft K2 = 14018.00
hs1754 yes are different the frequenzy meter of the transceivers
Much cleaner sound on the 7300. The ring on the tentec is almost unbearable
I am sorry but is impossible at moment i have changed my setup 73
Could be any slower switching between the two?
I am sorry but is impossible at moment i have changed my setup 73