Видео

You saved my family! Thanks a lot! Worked perfectly with my machine also.

Hi I have a WK2 GEM my problem is display screen when pressing power on all good but screen light is good it used to say wait then start but this week it just shows a yellow lit up screen but nothing else as I have no contact for p.aying music have good day

Fixed our dishwasher last night, using your advise, pulled it out and tilted it backwards, there must be an orientation sensor in them somewhere, thanks 👍.

You absolute god 🫡 worked a treat!

Awesome man everything as you said. Think something blocked the pump. Cleaned it out and tilted appliance on its side and bingo she lives again 🎉🥳👏✊️🫡

Thank you so much. Exactly what I needed!

After struggling to work out what was wrong with the machine and reluctant to call out a professional until I’d tried everything. I was recommended your channel and I gotta say you’ve got me either an expensive bill or a whole new machine. So thanks 😂

Ty, Very helpful.....

Thanks! Tilting my machine (SKS50E42EU) solved the blinking water faucet light issue 🙂

Thank you for the video. I have a GEM WK1 in a the sound board and the power boards are well but all the key note buttons do not work. Kindly help me out.

I’m a complete newb. Where would I be able to purchase a capacitor please?

Bro... thanks...it is work for me!!

thanks a lot! this video allowed us to fix the dishwasher in 5 minutes with no cost

there is a wet sensor in the tub down and you have a leaking water my friend. not calling the costumer service, may lead into a bigger bill. the poor pays twice my friend.

You are the BOSS ! I have watched dozens videos and no one helped me solve this issue until I found yours. Got the dishwasher out, tipped it to the right, little bit of water came out and that did the trick. Massive thanks you saved me some $$$.

Can you list the order of the wires

Just fixed mine. I suspected a cap. This video gave me confidence. Switched the cap, noise is gone and works as new. Thank you!

This worked for my bosch thank you🎉

I have mi box.it was updated but then it went black. It is showing nothing . How can I fix it please help

i just solved the error on my dishwasher, just after watching this video! thank you

HELP ME! SOMEONE SHARE WITH ME THE MDZ16ab.img

Thank you ❤❤

Brilliant! Thank you! Tilting the machine worked.

Thank you - after watching this video I fixed the same issue with mine. ❤

Nice video, Can we get that controller from other company and fit it in ikea desk ? That whole board with memory functions and keys

Thanks for sharing your expertise! The spring unit on my TU-10 broke (the holes that hold the spring cylinder in place). Any chance you would know how to fix that? Thanks

Thank you so much. Dead Bosch dishwasher with flashing tap light. Constantly trying to pump. Pulled it out. Tipped it over and out came some more water. Reinstalled it and what do ye know. Good as new. Saved us a wedge of money. Hero.

Thanks for this upload

The only video I've found regarding replacing the FCB1010 leds! Do you happen to have a link or size of the leds that fit?

my update was stuck on 5% but i fixed it by disabling 'update only when wifi is on' setting in updater

Thanks mate, it helped me a lot. It works.🙂

Could you show the possibilitys of this Firmware?

Worked for 2 rounds, after that same issue. What else can I try?

I want to get one. Can I still get one?

Good job It helped me a lot

You saved me ... Thanks thanks

I have one at my disposal. They crackle very much. Panning all over the place. Volume knob on max to get a little over average volume. What are those ‘bulbs’ you clean an did you replace them?

Very useful. Tilting the dishwashed get some water out and then the warning lights disappeared. thank you

Thank you so much! In case the TL-WPA4220 is still working but makes high frequent noises: this capacitor has maximum only half or less of its former capacity left! -> A change will remove the high frequent noice. Some comment regarding the soldering effort: just remove the capacitor with heating the pins from the backside of the PCB - move the capacity carfully during heating with your finger as long as pins are out of the PCB (let both PCBs connected) and drill afterwards with a 0.8mm drill the remaining solder out of both holes. Use a new capacitor with long pins and thread it from the front side into the two holes of the PCB -> solder it and cut off the remaining pins from the backside of the PCB. -> safe your nerves to demount the connection between PCB (platine) 1 and PCB 2 🙂

Thanks a lot for this great video, I removed the water from the back where a plastic cover holds the inner and outer water pipe, and now it works again. I used soap instead of the expected cleaning tabs and it made a lot of foam and therefore I had a lot of water out and also at the floating sensor, thanks ;)

Legend

My fricking hero!! Nice one bud! 👍

Download MDZ16AB.IMG firmware Image link not working please help

your tilting advice worked! thanks!

I have the same exact Macbook Pro i have no experience with soldering but it would be super useful if i could maybe get a kit or something what do i need for all of this and what capacitor?

Please how can i reset my keyboard wk2000 oriental

Yeah, thats a good Video für me, cause i want to clean my macbook too.

I have almost the same dishwasher with the same problem, but the LED tap symbol is only blinking after a finished program! Is it the same?

This worked for me! Thank you so much!

For the stubborn screw: you can make a thin hole in it and use a "screw remover tool" to get it out - it's a right handed conic screw that screws into the hole and then you can use it to unscrew the stubborn screw.