Видео

What operating system do you want to connect with? What is your mobile phone?

Check if the problem is solved by using VPN and IP of other countries?

We will soon include the link to purchase this car cigarette lighter connector in the video description section.

There is a switch on the device to switch to 5.1 channels. You must use that key

Yes, it's perfect for building a variable DC power supply.

That's fascinating! I'm glad the funky Hammond organ track made the video enjoyable for you.

Thank you for your support. I'm glad you found the video helpful! I suggest you watch our new video about 0-100V digital voltmeter. Link: ruclips.net/video/fSS-SGHEFJc/видео.html

It's a good point, continuous charging can be hard on batteries.

The VGA port only transmits the image. In this converter, a separate 3.5mm AUX audio input is considered. The sound output is also considered as 2 white and red AV plugs.

@newtecpro if I want to use it as aux to rca will it work without vga and display rca cable ??

Yes it is possible. Audio conversion from AUX to AV is done separately. But this is not logical. You can use a normal 1 to 2 audio conversion cable to convert 3.5mm AUX to 2 AV

@newtecpro I have old home theatre rca speaker I tried that but output is very low so I think it has external power source so it could work ??

I will put the link to sell it in the description soon. The price is around 1 to 2 US dollars.

thanx my frind

It is absolutely true because only the bass filtered sound is heard

Please note that this module is not for charging. It is a step-up and step-down module and does not have full charge protection. To charge a lithium battery, you must use this charging board, which we explained in this video: ruclips.net/video/bVbF_IWbiOo/видео.html

@newtecpro yes i am not using this as a lithium battery charger, just as a temporary power supply to use on my circuits. Was curious about this setting on the module as i couldn't find any proper documentation for this board. I think you were one of the few channels that show this board so i thought you might have more use of this board by now.

I'm glad you enjoyed the video!

This is unusual! Could you check the remote control buttons? You might have accidentally enabled a random music option.

@newtecpro Thank you very much for your interest,I will check the remote as you said.Greetings from Turkey/🇹🇷🤚

There is no difference in sound quality. In fact, they all use the same IC chip. So the difference is only in appearance.

hello The charging voltage of 4 to 4.2 is almost suitable and there is no problem.

Thank you for your support. I'm glad you found the video helpful.

Thank you for your support, dear friend.

Yes, you can set the buck converter output to 3.7 volts or slightly higher (maximum 4.2 volts).

did you check Do you give exactly the same voltage to the telephone bases? If the battery voltage is 3.7, you can slowly increase the voltage to 4.2. Is the problem solved?

Thank you for watching, hope you enjoyed it!

We will include the purchase link in the video description soon.

@newtecpro will you provide circuit diagram??

Thanks for watching! I'm glad you liked the low frequency Subwoofer.

Yes, Bluetooth offers the most flexibility for wireless audio playback.

Yes, it is true, but the analog model is easier to program. Also, the number of daily programs is more.

Glad it was helpful!

There are 3 MP3 player models and 1 MP3+mp5 Video player model.

@@newtecpro mp5 dont exist lol

No, it does not need internet. A wireless Wi-Fi connection is established between a mobile phone, tablet or laptop with a dongle. The dongle then creates an HDMI output for the TV

Solder the wires to the inner pins. And the cable comes out from the end section. We will post a new video of the correct method soon.

@justanotherfella4585 The negative lead goes to the side of the LED attached to the side springs. The positive lead goes to the other side of the dropping resistor attached to the LED.

You are absolutely right, this can be annoying, especially on big amplifiers. Make sure to test it out before connecting it to a big amplifier.

You're welcome! I'm glad you enjoyed it.

Yes, this model works in all countries

I am glad that this video was useful for you. I hope you will see our next videos and share your comments with us.

I'm glad you liked the video!

You're welcome! Hope it helps!

@@newtecpro definitely it was helpful, I’m just beginning my journey into Robotics. 75 years young Retired Air Force,Software / Systems Engineer, Amateur Radio AA4SH

You're right, it's used for measuring voltage, very useful for various projects.

We will soon include the purchase link in the video description.. Its price is about 1.5 US dollars.

Make sure you have connected the Ammeter in series with the load.

Hello, I'm sorry you encountered a problem. It's recommended to set up the 3.5 mm jack (pins) and use a separate Bluetooth audio receiver module. If this does not work, you can search for the IC datasheet online. Locate the audio input pins and very carefully solder the stereo output to the IC audio input pins. Please note that this task is quite challenging and requires a high level of skill.

Describe the problem

thnx

Yes, it is true. There are 2 pins. + and -

Hello. 2 amps is safe and if you cool it down a lot it can output up to 3 amps

No, this is not normal. Please check if the battery is fully charged or not has an effect on this output voltage?

@newtecpro I find that module work unstable below 3.7V input, because lack of undervoltage lockout then Voutput bump, try it