Видео

Hell yeah , got a 1995 corvette with super weak spark. The FSM lead me to distributor , i have it out , going to tey this test , thanks a million👍👍😵‍💫

I have this occasionally. I have noticed that it is triggered as soon as I turn left. Going to check electrical connections at wheel bearings tomorrow

These really should have had a sensor at every 120° and a switch in the engine to change over to an alternate in case one went bad. I just spray the hell out of mine with cleaner for now when it acts up. Doing anything with coolant is scary

What about a 2.7 to 6.1 swap?

Hey bro i have a 5.7 and plan to swap it to a 6.1. Will using a plug and play Diablo sport tuner be enough? Or would i need to change the pcm and other stuff? I would be getting the same year engine as my rt

Try doing a key relearn. Check Google how to do it. Had to do it on my challenger when I got home from the dealership.

Hey how did you get rid of the codes ?

So you put the rgb bulbs in so everything can be a different color? How much if ya do and where do i send it? And how long to get it back? Thanks

Has the new computer been programmed into the car?

5 years later first time seeing March 4 2023

I'm confused...So you said you are testing the opti to see if it's bad. But what are you actually testing? One from the junk yard, or the one that is still on the engine? How are you getting a spark, since the engine has to be running to get one?

Did you find out what was the cause? I have a 2009 dodge charger rt doing the exact same . If anyone knows how to fix please let me know?

Im doin this to my 06 daytona tight now got a 06 300 srt 8 for donor car

Thanks so much! I have a Dodge Challenger 2015. But all Chrysler interiors are similar. My guage cover is cracked. It's driving me crazy so I'm going to replace it. Wish me luck

Bro you don’t even record right

I have the same exact issue sent my ecm off came back same issue want crank had several mechanics nobody has got it crank yet

I just had same problem. They told me it was because I didn't have coolant in tank. I replaced battery starter and all

I have a 06 rt keys got stolen car cranks run find battery went dead ..new battery now car want start

This is still a awesome video! Thanks!

What all did you have to change cause mines in limp mode and it has a 6.1

I’ve found this video as very insightful. I have a 96 vette that went dead after having no previous issues. I’m thinking I can check my opti by removing the spark plug while still connected to the wire and turning the engine over to see if I have spark.

Well just happened to me. And reading the comments guy say parking shift is not getting when should be just push the. Stick hard. All the. Way to park and. Work 👍👍

My 06 Charger RT will start most the time but the problem is the anti-theft system comes on so it stalls out and it keeps doing this and I can't find anything anywhere on how to disable the system or fix the problem! 😞

the same thing happened to me once when i used rattle can adhesive promotor on a pair of harley saddlebag lids which are made of hard plastic. i sprayed the promoter. let set per instructions. then i sprayed a single stage black urethane paint over it. when the urethan had dried the lids had pit marks like popped little bubbles on them. what i realized was the promoter solvents hadn't fully finished evaporating and when i applied the paint over it the promoter solvents simply floated to the surface leaving it looking like a bad case of acne. so i stripped them and used a rattle can grey primer then paint and it worked out fine. i looked at your hood and it looks like there were places that weren't sanded enough you can see some sheen on the red. also what type of paint did they use. lacquer, enamel, acrylic enamel, urethane or epoxy. what might have happened is whatever they used to thin the plasti dip could have caused the paint to lift. companies use like xylene and other harsh solvents and can react to paint. like softening or lifting. and it may not stick. almost like brushing paint stripper in place of the plasti dip. i'm looking to plastidip my brush guard on my suv. and plasti dip won't permanently adhere unless you use the plasti dip primer under it. there is also a glosser they make to supposedly make it glossy. but i read some bad reviews about it not being real glossy. im still debating the plasti dip. i think im going to use al,s bed liner. maybe. i want a rubber type product that stones and like road sand will just bounce off of. but. so far line x has been the only one thats like that. i have had line x in my old nissan p/u. no doubt its the cats meow. but their prices will bankrupt me doing it. more than i paid for the guard. so happy hunting. there are so may dam products and a lot don't give you any warnings, compatibility with what you put it over, etc. all they want is your bank account. and all they give is a crock full of excuses why it was us that screwed up. so they don't have to refund their products.

How about the Ignition switch. Have you changed it ??

Do you know it would be different for a 2020?

Do you know the measurements of your radio?

Hello, are you still making the cameras. I have a 2011 Dodge Charger. How can I get hold of you to buy a kit?

Did you figure out what it was?

Did you end up finding out what was wrong with it?

ik I'm a few years late, but out of curiosity, how much was the transmission swap?

Poor Dodge. You make some new memories in that thing now

That happened to me You gotta replace the starter with a automotive pushstart it will never happen again 💯

My charger is doing the same thing right now it won't start but it sounds exactly like yours what was the problem with your car

I’m definitely doin this so where’s a good place to find a 6.1?

That camera was Not safe.

This happened to me last night stranded me for 5 hours your very first code is the key immobilizer ECM not recognizing the 🔑

I hope your local gas station is nearby, lol sounds great.

How do I get one

I spun mine with a cordless drill with the lights off to get a better look in the dark and only have 4 good ones, going to change the cap and rotor next.

How do the radio harness look for the 2014 charger I wanna change the radio I got the cluster not the kit that comes with the harness

ruclips.net/video/BIdy3HIwZis/видео.html

how did you turn on the fuel level gauge

Man wish I would of saw this vid 13 years ago, Ive replaced my opti 5 times over the period. 94 non vented. Glad you made this.

Hi i have a charger 2013 and i want to replac the cluster to 2016 and up models . is that disable ????

So I have a 2007 Dodge Charger rt r&t package. Will a 2010 Jeep 6.1 motor bolt right up. Or is it things I’ll need.

I'm sure it's the Starter that needs to be replaced

Did you fix your car. And what was it

You didn’t sand prep the red.

Where can i buy them?