Видео

PCIe 3.0 @ x1 was 797MB/s, PCIe 2.0 = 409MB/s. Bootable from any slot, but as you know it won't beat SATA3 on the x1 lanes, technically. Could possibly be more responsive but data transfers would be the same afaik.

If you're not concerned with closing the case, I've moved the PSU and used full-size dual slot GPUs no problem. Since you mentioned a low-profile GPU I doubt that's your plan and haven't came up with anything beyond a case-swap. Also remember the power limits on the pci-e slot if it doesn't have the separate pins. I think it's around 40w. From my inventory the quadro p620 has been a great match and allows the case to close, just fyi.

Awesome! And thank you, it's something I've always loved digging into. Mostly clueless when editing but still having fun.

It does not have hdmi port what should i do

@@AzizaFatima-q2d just keep trying

Thank you! I went through several ideas and had a specific case I tried first before realizing how perfect the big case was, and it's been my main server since. Glad someone got some use from my play-time ;)

Thank you!! And I appreciate the advice, still not completely sure what I'm doing...

Since when do we ask those kinds of questions?!? For real tho, all these monitors were going to a dumpster so I picked them up then had to think of what I could use them for. Hell, the wood is from an old couch I tore-down for scraps when it was ready to toss. I hoard...but I use the crap, too...

Awesome! Thank you so much, and sorry for such a delayed response. I typically post something then close my eyes for a while afraid to learn what I did wrong... lol

About 8 inches with the hard drive cage still installed, 13ish inches with it removed. The USB3 header and a 6-pin PSU connector might be in the way after removing the HDD cage, depending on the card. I've removed the USB3 cable to make room before, but iirc that prompts a warning you can't bypass. Good luck :)

I’ve never used a Surface PC/Tablet but assume it’s great on there. I laughed back when I saw it on the Xbox too 🤭

​@@fongumodafakucan confirm was amazing on surface RT and original surface pro. But for my pc I used win 7

Thank you!

Yes

Awesome, thank you! 😁

Ltt did it already, but More screens

Not trying to compete, but did they do a "wall" of vertical monitors? I had 9 set up horizontally but none of my equipment would let me create a single desktop with them all. This is using 4x identical low-end nvidia gpus lol.

Yup. Was like $8 on Amazon

I kept wanting to think of a good reply but just crack up every time I read "want to shit their pants". .....I just noticed your username

If it fits and is running anything should "work", but with these HP machines you might get warnings/errors if not using their specific parts.

Thank you! When I get something in my head I have to try it just to see if it's possible.

There are models that support E5-1600 & 2600 series versions 1-4, yes. Sadly the two Z420 Workstations I own do not, without serious bios programming way above my head. I recorded a video figuring that out and returning the first CPU I had ordered but seem to have lost the footage. In short, if the 'bios boot block date' is earlier than 2013 you're stuck, if after, you have options. Discussed here: h30434.www3.hp.com/t5/Desktop-Hardware-and-Upgrade-Questions/No-post-on-Z420-with-cpu-upgrade-to-E5-2695-V2/td-p/7455044