Видео

@@leroy7628 the parts I used are from IERC. The cab is mounted with an IERC front brace and for the bed, trx hlp t-bed. You can find both on their website.

@ what about the back of the cab? I’m looking to upgrade my sport with the same bed and body as this one. Also what battery mount are you using?

@ well I cut the body to sit very snug and it’s held down with the bungees you see in the video also it doubles as a winch and for the battery tray I use the power wagon sliders offered on the IERC website. I leave it loose enough to slide in a Velcro strap and then I tighten it down (the slider)

@@WestCoast_RC I’m interested In seeing pictures. It is a very slick looking rig

@@WestCoast_RC are you sliders large enough to mount electronics to?

Thank you

@@bwompusss7397 Thank you . www.prolineracing.com/product/1-10-mickey-thompson-baja-pro-x-predator-f-r-1.9-crawler-tires-2/PRO1021303.html

@@MichaelCromey thanks my man I really appreciate it

@@antranekkrekorian6960 thank you

@@LilyAvetyan 😂

@@edsaakyan1701 thanks my man

@@backshedrc I haven’t taken it out on the rocks yet but the tires are very sticky and the inserts feel really good in them. Also the inserts are not as soft when they’re in the tire, I think they’ll be a perfect combo together

@@Rcfull thanks brother

@@natestapp5573 thanks brother, I appreciate the love! I was considering putting in the furitek I just haven’t gotten around to getting one. I went a little crazy with the mods this weekend. Went all out with a bunch of brass, all the way from brass wheels to brass everything underneath the chassis. Servo was replaced as well only thing left is the chassis it self and a motor esc combo. I was also thinking about the new hobbywing combo, looks pretty dope.

@@MNRstander it can at times haha

@@WestCoast_RC 😂

@@MillyAire same pinion. I recently turned this into a 6x6 but on that I went up to a 17 pinion but when it was in the gen9 I left it stock

a.co/d/3ollvcE < that’s the link from amazon for the hitch and the neck on the trailer came as extras with the trailer

@@WestCoast_RC awesome thank you i wish there was a link for the trailer extras. Unfortunately mine is second hand and didnt have that neck

@@ryanfenn22 is your trailer hitch straight? if so here’s another like to balance it out a.co/d/3cEkOMd

@@WestCoast_RC yes i have this one in order just was looking for the actual trailer part as well

@@branthalper1016 both rigs are a TRX4 platform. The comp wagon with the ruptures has inner and outer brass portals for the front and only brass outers for the rear. Front and rear IERC shock mounts with high trail shocks for more articulation. 3d printed flat skid. Dual stage foams from proline. Hobbywing fusion pro 2 in 1 and Holmes hobbies shv800 servo The comp wagon with the Landmines has inner and outer brass portals and a brass rear diff. Front and rear IERC shock mounts. Vented landmines with foams that come with tires Hobbywing fusion pro 2 in 1 and agfrc servo

Personally I have never ran them upside down, nor have I ran any shock upside down but it’s done so that the shock oil doesn’t leak out. I dont like the way they look mounted upside down but that’s just my preference. Others may look at it like more weight down low, but I don’t think it makes a difference in performance where I’d even recommend it or consider trying it myself. Thanks for asking!

Completely stock it runs $450 after upgrading roughly $1k-$1.2k

Where are the light pods from?

@@DiegoSolorio-u1h so the one I ordered isn’t available any more, I tried finding the link for you but is no longer available but I found this and it’s very similar to what I got. cults3d.com/en/3d-model/game/trx4-sport-flat-skid-crawler-clearance

@@DiegoSolorio-u1h honestly this one looks a lot better than the one I have and it brings the transmission a lot lower than mine so in reality it’s a better lcg option than mine

@@OGRadRC thanks brother

Thanks brother

They’re 4.9” and made for 1.9” crawler wheels

They’re the best bang for your buck. Realistically all 3 crawlers are very capable out of the box vs other brands and having to modify it for it to become half way decent. So in the end you spend more money on something you didnt even want in the first place and that’s why these are fairly budget RC’s

Thanks brother. I’ll return the favor 👍🏻

Thank you friend

Thanks brother

That’s where I ordered mine from. No I don’t have the lift kit but I do have the springs pushed all the way down to have more tension so when I haul something on it, it compresses just fine and not so wobbly. And I did add the 3d printed bed widener from AJRC. Makes all the difference

Thanks pal

Thank you

Glad you enjoyed it

Thanks brother

You should it’s bad ass

Thank you

You are Welcome my Friend!

Thanks pal

Thank you brother

Thank you very much

haha 😂😂😂 Thank bro.

Thank you my friend

Thanks my man