Видео

Thank you! I wish I would have recorded more, if I had adjusted for the wind I think he would have been a dead antelope but who knows.

Speed goats👍

@@landonharger2041 thanks for the feedback and support! Yes you will have a little larger drop but not a crazy amount remember one of these arrows is 700 grain flying at 242fps. You should absolutely do the test yourself or if you want to explore multiple options I have built an app to tell you all this information you can find it on iOS as archery ballistics/pro archery ballistics. Thanks for the suggestion on a video. I haven’t made a video in a couple months, hunting season got in the way, but I have a lot more planed! If you use android I need beta testers for the app send me an email at proarcheryballistics@gmail.com Take care, Lucas

@@bailymela6854 north idaho

@@Lucas_Palmer_Archery 😂 looks like it’s up in the cabinets

@@danielleib7671 android or iOS? And thank you.🙏

And i agree with all the great comments!

@@jonabub absolutely I did consider reaction time, it was taken away from the flight time. Excellent question.

@@Lucas_Palmer_Archery Thanks for the compliment, means a lot coming from a guy with your work ethics and abilities!

@@chriskillgo8976 make sure to send me an email if you haven’t proarcheryballistics@gmail.com

We are trying our best! Thank you for the kind words we are blessed for sure.

@@TheOffCycle absolutely! The only other variable which is outside of sectional density is time of flight. Since the heavier arrow launched from the same bow will take longer to travel the wind has a longer time to act on the arrow. Cartridges can be manipulated by powder charge so there is some differences there. I try to explain everything in the simplest terms possible. That’s for the comment. Take care, Lucas

@@Lucas_Palmer_Archery charge weight would equate to draw weight and length.

@@MiguelVidal-l8l send me an email proarcheryballistic@gmail.com

@@Zephhyr69 send me an email at proarcheryballistics@gmail.com or reach out on instagram @l.e.a.p_Outdoors. We can talk more

play.google.com/store/apps/details?id=net.leapphoto.www.proarcheryballistics

@@trloftin Awesome! can you send me an email to proarcheryballistics@gmail.com or reach out on instagram so we can message privately. Instagram is @l.e.a.p_outdoors

@@smau990 I have been trying to figure out the load cell attachment still working on it. The spin rate I am going to mark the arrows to more effectively measure but that can be done with the video. Thanks for the questions and suggestions. Your questions are very similar to mine. As far as stabilization of a torqued shot or slightly out of tune bow which is what this would represent I don’t think the spin rate has much affect. However, on a well tuned shaft I think spin rate is more of the deciding factor. But we will see if I can answer any of these questions.

@@ArchersAnonymous-nb4ym I have a video idea with this exact comparison coming up! Thank you for the suggestion!!

Me too there is a whole section that was supposed to be sped up not sure what happened there but. I will try to condense and make it less boring in the future. Thanks for the feedback…. Unless you have insomnia in which case you’re welcome glad I could help! 🤣

Followed up with your email. Thanks for reaching out.

@@WessMaynard351 from my experience I would say yes especially with fixed broadheads it becomes more noticeable. I have some testing planned on this coming up.

Send me an email at proarcheryballistics@gmail.com or reach out on instagram we can chat.

@@geoffader no unfortunately different buckles and I would have to cut the muley freak buckles out or break them to change them they are sewn in.

Glad you enjoyed it! Let me know if there’s any particular topics you’re interested in that I haven’t discussed. Thanks for the support, Lucas

Absolutely, in fact I said in the video, that the test proves and shows nothing. 👍 thanks for watching.

@@danielhoerig2649 check your print setting make sure it says print to actual size or scale at 100% because it’s small printing software likes to scale the image.

@@Lucas_Palmer_Archery my printer app on my phone wouldn’t let me change it. Saved the file and emailed to myself. Printed from the laptop and all is good. Thank you!

@@danielhoerig2649 thanks for the update I’ll have to work on suggested apps for printing. my goal is to provide everyone the ability to print tapes. For some that might be library or Office Depot but still an option. Let me know if you have any other issues.

@@joshuaeck2712 I am working on android version should be out in a couple months. 🤞

@@Lucas_Palmer_Archery oh OK

Appreciate your support.

@@Lucas_Palmer_Archery just printed out some sight tapes to verify what I had selected. This really helped me fine tune my metal sight tape. One suggestion. Give the option for tick marks every 5 yards as every yard is a little crowded. Also love that I can get the tape set up at my elevation and print another for the elevation I’ll be at in September!

@@rrvil awesome glad it was helpful! Thanks for the suggestion I’ll add it to the list.

@@nightvarmint it’s coming I promise.

@@benjamins7799 which HHA do you shoot?

If you can take a couple measurements for me I can add it to the app. I need the diameter of the dial which the sight tape is attached to. The second measurement is the how far 1 pin travels per a full rotation of the sight tape dial.

Awesome, I’ll get that information for you when I get a chance.

I have an HHA optimizer tetra the diameter of the sight tape wheel is 1.677, but it has a couple of tapes on it which are .0035 thick so it could be as low as 1.663. I can’t get it to do a full rotation but did half and the math comes out to 2.365 of pin movement for 1 full rotation. I also have an HHA optimizer lite ultra. The wheel diameter is 1.892 with 1 tape on it so it could be as low as 1.885. 1 full rotation maths out to 1.554 of pin movement.

@@benjamins7799 Thank you very much I added the features to the app, based on your measurements. Updates usually take a day or so to get approved, so you should be able to update tomorrow to version 2.8, which has these sight tapes. Let me know if they appear to matching up or not, hoping to get my hands on more sights soon to add as many as I can. Thanks again Side note if anyone has a sight they would like supported please provide the measurements and I will happy add them!

@@Jsfea01 spin rate does helps to balance out imbalance in the arrow system. Imbalance created by shaft flex, weight imbalance, geometry imbalance, shaft straightness, insert straightness etc. so ideally we want a rapid spin up. However, I have not gotten to the point of determining how much spin is necessary hopefully I can create some guidelines to follow for that. Surface area and where the surface area is relative to the shaft is the most important factor. Thanks for the question.

Thanks for the support, any comments, questions, or suggestions please let me know. 2 months free should still be active until August.

@Lucas_Palmer_bownerd_engineer I checked for it, unfortunately I don't have IPhone, is it, or will it available for Android?

@@SWMissouriOutdoors I am working on the android version. Keeping the cost low by doing it myself makes it take longer. I am hoping a couple months to have it finished.

@@royleerobinson5 correct and change the value listed as “scale adjustment” listed on screen it will be a whole number. I also recently was made aware of a bug when switching between sights specifically from sport high to black gold/linear it does not like to update. However if you click on HHA or one of the other options then back to black gold it will update correctly. Working on a fix right now for that.

@@royleerobinson5 update is now live to fix that issue. Make sure to keep the app updated I add features often any problems please let me know. Take care, Lucas

Awesome! So i live in wyoming and setting up a tape out here is a nightmare witht the wind. Like 5 months ago we were trying to use a rifle ballistic app to do what you did in the video using ballistics indoors to get marks. Have you done more of that and what was your experience?

@@royleerobinson5 I have had a couple individuals try it with good results. However it is very sensitive and easy to be off it is more of a “bore sighting” get you on paper requiring fine tuning. However with the app it becomes unnecessary. You can use the onscreen or printed tape to set pin gaps. A buddy of mine just got a new bow we set it up in about an hr and we’re shooting 90yards without issue. We set the pin gaps to the linear tape option and matched a tape that came with his sight. For curved sight tapes like spot hog you would select a linear tape option to set pins and then Print the tape for the actual sight you are using fast Eddie black gold or whatever. He was hitting a little low at 20 made a slight adjustment and he was dialed from 20-90 with the tape and pins he runs a 5 pin slider. Does that process make sense? I have a bunch of videos I am in the process of making detailing how everyone can do this.

Also you can still do the ballistics method with the free or paid version of this app. You would select the pin you are trying to sight in for example 60yards as the zero, change one of the columns to drop and then shoot at one of the distances 5,10,15, 20 yards and hit the amount high listed on the drop column. However, it's much more accurate to use the sight tape section to set up your sight.

@@bowhunter7922 hey great question no I definitely did not assume constant velocity, I actually built a ballistics calculator based on a study of arrow drag from the Japanese institute of technology which found drag coefficients of an arrow. Fom that I determined the drag per interval from launch to x yardage to determine what would be the downrange velocity. However, some discussion in the video is discussing the two most common arguments of today. Which are energy based penetration estimate vs a momentum based estimate. Neither are accurate which ED Ashby confirmed in his testing as well. I then used the poncelet model of penetration specifically a solution for a non deforming elongated rod to estimate penetration which followed much more closely with EDs results and others. Thanks for your question and support, take care.

Thank you very much!

Thanks for the tip! I appreciate the support take care, Lucas

@@davidvedder2145 I’m working on a way to measure this. We will see if it works

@@C.Fowler the FOC video comes after this one. FOC Flight, Penetration and Buckling? Archery Eduction Video 4 all about FOC ruclips.net/video/uKjj2wqxoOU/видео.html

@@loganchapman105 thank you will do! I realized too late after I posted that I never did that. It’s kinda like watching paint dry isn’t it. 🤣. Take care, Luc

@@thewhiskybowman the wind is blowing from top to bottom, many people had the same question so thank you for asking. More videos to come thanks for the support. Take care, Lucas

@@Lucas_Palmer_Archery Thanks for the reply, I did have a look at the questions before posting and hadn't noticed that it had already been asked. Unfortunately I don't think youtube always shows us (the viewers) all the comments, which must be frustrating for content providers having to answer the same things over and over.

@@thewhiskybowman Its all good! I don't mind the comments with questions, it helps me to know what I need to explain more next time. I made that comment such that you didn't feel bad for asking since many people thought the same thing. It's a good question to answer multiple times makes the answer easier to find. You are absolutely correct RUclips does not show all or even in order the comments. Sometimes I miss comments as well and I am supposed to get a notification for each one! Anyway take care and thanks for you support! Luc

@@gowithabow your welcome stay tuned lots more to discuss!

Agree!