- Видео 15
- Просмотров 690
Made in the Shade Support
Добавлен 4 янв 2024
Switching Between Roller and Sheer Mode for a Bliss Motor
When programming a Bliss motor, there are two options which controls how the remote control operates the shade. Sheer mode allows for incremental adjustments of a sheer or banded shade. Roller mode is designed for roller shades that do not need intermediary stops and faster operation where the position of the stopped shade does not matter.
Просмотров: 18
Видео
Setting the Limits on a Bliss Motorized Shade
Просмотров 1228 дней назад
After programming or during use of the shades, sometimes the upper or lower limit is not programmed correctly or got out of line with others. There are a couple of easy steps to fix both the upper or lower limit of the shade.
Setting a Favorite Position on a Bliss Motor
Просмотров 928 дней назад
After programming has been completed on the Alta motorized shade, many customers have a position they would like to set and forget rather than waiting for the shade to reach that position. There are a few simple programming steps to set a favorite position on a Bliss Motor.
Adjusting Motor Speed on a Bliss Motor
Просмотров 828 дней назад
After the programming has been completed on your Alta Bliss Motor, sometimes one shade is not cooperating like the rest and running at a higher or lower speed. Thankfully there are options to increase or decrease the speed on the motor.
Pairing a Bliss Motor to a Remote Control
Просмотров 1428 дней назад
For the initial setup of an Alta Bliss Motor, or if the shade is not responding and a reset and pair is required again, there are a few simple steps to take for the remote control to operate the new shade.
Copying Channels On A Bliss Remote
Просмотров 1028 дней назад
Groups or multiple shades on a single channel need to be programmed for the shades to operate at one time. If you have multiple shades in a Living Room or Bedroom and desire independent function AND all shades operating together, you will need to copy from one channel to another.
Somfy Motor Resetting
Просмотров 31Месяц назад
This is a quick video to completely reset your Made in the Shade purchased Somfy motor to any learned programming. The purpose of a motor reset is to start fresh with programming and sometimes is needed if the current programming is giving you problems.
Setting the Disto Timer
Просмотров 212Месяц назад
This is a quick video to find the timer settings on the Lieca Disto. First, we want to make sure the measurements are set to the nearest 1/8" of an inch. Don't forget to the extend the backside of the laser so that you can measure in the window properly! The measurement will be taken from the end of the extension.
Somfy Ultra 30 Charging
Просмотров 67Месяц назад
This Somfy Ultra 30 motor is often found on roller shades, but can be used for roman shades, woven shades, sheer shades, or layered shades as well. The charger indicator light will turn red when the battery is dead, amber, and then green when there is a 100% charge.
Charging a Bliss Motorized Shade
Просмотров 41Месяц назад
The Alta Bliss motorized shade is a customer favorite with Made in the Shade. With very easy programming and charging, the Bliss motors will give you many years of functionality.
Somfy Limit Adjustments in User Mode
Просмотров 42Месяц назад
Sometimes a Somfy motor needs a simple adjustment of the upper or lower limit and the shade has already been programmed and in daily use. Rather than completely resetting the motor, there are very simple steps you can take to make that incremental adjustment.
Somfy Battery Replacement
Просмотров 111Месяц назад
Changing batteries with an external battery pack from Somfy. This motorized shade power supply was the most popular choice for window treatments until rechargeable motors took over.
Somfy Remote Deleting Shade on Channel
Просмотров 59Месяц назад
Sometimes during programming, a shade could receive a signal to be added to a remote that was not intended to. Or, we copy and paste to the wrong channel. If your motorized window coverings need a channel deleted on a remote control after Made in the Shade completes the installation, this video should help!
Somfy Remote Copying a Shade
Просмотров 37Месяц назад
There are a few simple steps to take if you want to copy from one channel to the next on a Somfy remote control that was purchased through Made in the Shade. The purpose of this copy and paste might be to add multiple channels or shades to a single channel for an 'all' function, or it might be to copy from one remote to another.
Charging Shades with Metal Fascia
Просмотров 25Месяц назад
Metal fascia is a great choice to cover a roller shade and give a clean finished look. It is not the easiest charging option because the bottom side of the fascia can cover the motor head. Leaving an 8" extension plugged in is an option for easier access, but this cord can get caught in the roll and cause fraying and issues rolling up.