Видео

Yepyep, i have it already, i tried to upload it for you, but YT deleted it, cause its violating the rules 😓 You can find it on my FB page 😉

@the_B.A.D. Send me the link, I'll be grateful, but the fact that YT suggests that something like this violates the rules is ridiculous, YT is getting worse and worse

facebook.com/share/r/19A3HM4zrz/ Yep, kinda strange, to share a video on yt from fb, cause yt has tighter rules what?!?! 🤷

​@@the_B.A.D.exactly... and as for the link, I'm on my phone and the link is not highlighted and I can't click on it, can you try again?

@@oliwier8122 facebook.com/share/v/1AkhZuTqsa/

Yepyep, that was a surprise attack... It surprised me too 😂

I'll make some like this, im planning that with all my replicas, but i have more replicas and tasks than time 😓😅

@@1690DAN absolutely! 😉 My kits air seal is 100% (with the correct lubrication) as You can see in my "Another ver." Kit short for example ☺️ And this chamber has a much better seal too than the stock one 😍

I didnt measured the fps, but my Another ver. was 1 joule in stock form, after the upgrading i got 1.4 joules, with the same spring, and a Modify tan rubber Cause of the immortal materials, it can handle heavier springs My piston has +100% weight against the stock one, the heavier piston handles better heavier bbs The another ver uses standard 8mm inner diameter vsr spring, so it can be a good sniper after the upgrading 😉

Thanks ☺️ and be so 😉 ill be here, if you have any question, feel free to ask ☺️

@@the_B.A.D. Well, I'm talking about the discounts, not if you don't give it once in a while because there's a discount code as a discount option

@@oliwier8122 Hellö there! I have an upgrade kit for the S&T Mosin-Nagant series historical-airsoft.com/product-category/mosin-nagant/ My Nagant was 1.1 joule with .32g bbs and 375 fps with .2g bbs woth the stock internals After the upgrading i got 1.7 joule with .32g bbs and 440 fps with .2g bbs so i had to cut my main spring to be under 1.5j 😅 With shortened barrel, and maple leaf Autobot 60 rubber ruclips.net/user/shortsANBk6X7Qtac?feature=share

@@the_B.A.D. Damn, it's a bit expensive for Polish ones, over 500 zlotys, I noticed that you can give a discount there, will there be one for the holidays, for example?

As for the steel mechanism, I would like you to record a video showing how to insert these parts, I personally have problems with this

@@oliwier8122 facebook.com/share/r/TRjPYhCZg41DwBmE/ Here is the complete installing, it was on yt too, but youtube didnt like it 😓 I didnt planned discounts yet

@@the_B.A.D. Thanks for the video, but there is some kind of discount code to enter, too bad

@@oliwier8122 Hellö there! I have an upgrade kit for the S&T Mosin-Nagant series historical-airsoft.com/product-category/mosin-nagant/ My Nagant was 1.1 joule with .32g bbs and 375 fps with .2g bbs woth the stock internals After the upgrading i got 1.7 joule with .32g bbs and 440 fps with .2g bbs so i had to cut my main spring to be under 1.5j 😅 With shortened barrel, and maple leaf Autobot 60 rubber ruclips.net/user/shortsANBk6X7Qtac?feature=share

The energy heavily depends on your pistons weight 😉 All kits have an ultralight piston, the stock one is 13g, the pro is 18g and the tnt is 19g My kit has an aluminium piston with 26g weight My kit handles heavier spring well, it has stainless steel cylinder head, cnc steel spring stand and steel sear All other kits spring guide is just a heavy iron rod.... Mine has an aluminium spring guide, with ball bearing, to avoid the rotation of the piston while moving forward, and let it use all of its and the springs energy to push toward to the bullet I have some fps adjuster ring set, to set the perfect fps 😉 All kit is made of immortal materials, and due to the good orings (with the correct lubrication) it can minimize the fps spread ☺️ Ohh and i send cool sticker with all of my kits 😅 Check in: historical-airsoft.com

Of course😉 ruclips.net/user/shortsANBk6X7Qtac?feature=share -Stainless steel cylinder head -Aluminium piston with +100% piston weight -Aluminium spring guide w. Ball bearing -Steel spring stand -Steel sear

Had some, in stock form it was weak, 375 fps with .2g bbs and 1.1 joule with .32g bbs After the upgrading i got 440 fps with .2g bbs and 1.7 joule with .32g bbs with stock spring, so i had to cut it 😅 now i have a much smoother pull, with maximum energy 😉 The stock plastic piston and the guide are awful, the spring stand is alloy... Meh... Had a huge fps spread, now we are under 2-3 fps spread Mine had a factory defect feeder, it jammed in pull, so i had to modify this part, but then i made this, and available on the shop I have some fps adjuster ring sets for it in stock

😅 RLY! We have some building maps, or separates buildings which would be perfect for a Zombie event 😍

Thanks ☺️

😅 after the first shot, he was still in low-ready, he might was curious if i shot twice 😂

Today chrono showed 1.43 joule and 310 fps with 0.32g bbs And 390 fps with .2 g bbs 😉

Absolutely! Now i have 3 SW Kar98ks, and i love 'em all 😉 Both of them are equipped with my tuning kit ☺️

@@the_B.A.D. so you only play with bolt actions?

Yesyes 😉 my primaries are only bolt actions 😉

@@the_B.A.D. One more question, what weight of BBs do you use? (0.20g, 0.25g, 0.30g, etc)

Im using .32g bbs, on 1.4-1.5 joule 😉

Hellö! I installed this: historical-airsoft.com/product/upgrade-kit-for-st-mosin-nagant/ 😉

@@the_B.A.D. do you ship to North Carolina?

Absolutely! Im shipping worldwide and had some costumers from the US 😉

@@the_B.A.D. Do you know where I could find information on how install these parts?

It easy as 1,2,3 😉 ruclips.net/user/shortsANBk6X7Qtac?feature=share And one of my American costumers wrote a highly detailed guide for the upgrades on reddit 😉 www.reddit.com/r/airsoft/s/bEvw5xIDdG

Thanks ☺️ sadly i dont have time for anything like that (yet) 😓 The community can reach me on FB, insta, yt, tiktok and reddit Im building the communities but it takes a lot of time 😓 😉

Thanks ☺️😍

I dont wanna play with scope, im playing in this "390noscope" style 😉 Any other attachment would be kinda heretic on an original german stock 😅

Hellö, Thanks ☺️ and Thanks for the subscribe too 😍 Im glad when a new player joins our Bolt Action community 😉 In my opinion, the M1903 is not the most recommended one in the list of the historical replicas But, if that is your personal favorite, You will truly love it 😍 It is massive and quite well build, but has some issues 😓 1. Feeding problems, the inner frame doesnt open the magazine lip enough, it is corrigible, i will upload a tutorial about the repair soon 😉 2. Doesnt have an "anti-early-lock" mechanism, so you can lock the handle, without locking bolt in the front, this causes an empty triggering, you have to open the bolt, push forward, and lock again that is a bit annoying, have to get used to 😓 These issues are on the S&T Another ver. Kar98k as well 😓 Im using mine on 1.5 joules, with my upgrade kit (it is prototype yet, but soon will be on my store) with a modify tan rubber My recommended replicas are the Snow Wolf Kar98k or the S&T Mosin-Nagant, they has upgrades on my store, dont have any feeding issues 😉

@@the_B.A.D. yeah, I'm already about to purchase it. I'm getting a scope for it and I'm thinking about just buffering out all the problems and modifying it. I've gotten an ak74 recently and it's been super fun to disassemble. Learning from that bit I wouldn't mind finding the problems with the m1903 and make it better. I know that there is s co2 powered one but least with spring power, you don't have refill it with co2.

Be so 😉 You will love it, and this style of airsoft 😍 Yep there are a bunch of co2 replicas, but i dpnt think they are really skirmishable... Uncomfortable co reload, patrons are empty when they needed, lots of issues with the o ring leaking, and huge fps spread 😓

Danke ☺️😍

​@@the_B.A.D.wo spielst du?

In Ungarn 😉

Thanks ☺️ and Thanks for the subscribe 😉 Sadly the Snow Wolf and the S&T Kar98k's receivers arent on the same diameter, and the Snow Wolfs dont have the cut on the stock for the ZF39 mount it's not insurmountable if you have the right tools and minimal mechanical affinity 😉 But im planning to build a sniper from a Snow Wolf with ZF39 Aand i have upgrade kit, to build a sniper for both, on my webshop 😉

@@the_B.A.D. nice maybe you can do a Video how to the build with the zf39😁👍🏽

It has to be Hungarian, but as i learned the two languages are quite similar ☺️😉

@@the_B.A.D. so i saw like a few spare parts for sale for the sw Kar98k so ill propaply fix the gun and stuff

And I’m gonna buy svr10 parts for s&t Kar98k becouse someone said they fit

@@urho5487 which parts do You need? ☺️

@@the_B.A.D. the whole back of the bolt and a plastic part on the inside of the gun

It was pretty awful in stock form, i could not pull back the bolt, cause of the too deep thread of the side screws... The thread was pushed into the feeder, and the bb in the magazine locked it 😅 -I made a new feeder, what is available on my webshop The internal parts were just a bunch of trash, lightweight plastic piston, awful plastic guide, alloy parts where steel is needed -i made my upgrade kit, which is available on my shop: -Stainless steel cylinder head -Aluminium piston -Aluminium spring guide w. Ball bearing -Steel spring stand -Steel sear In stock form, mine was 370 fps with .2g bbs, and 1.1 joule with .32g bbs After the upgrade, i got 430 fps with .2g bbs, and 1.7 joule with .32g bbs So i had to cut the spring to our local rules, to be under 1.5 joule I shortened the barrel And my CNC aluminium HopUp chamber is in progress, and soon will be available on my shop The externals are quite okay, only the barrel has a small wobbling The conclusion: It is a very funny rod, but if you want to take out the maximum from it, the upgrade is neccessary 😉

I think, the most common cause of it, is the broken feeder 😓 If it breaks it cant load the bb, but is break had to be critical Or it has a serious hop rubber scratch, and it stops the bb 😓

Not just heavy, it is scratchy to load n lock, in stock form In mine i have my upgrade kit, with the stock spring, and with super light pull and push 😉 My kit will be soon on the shop 😉

@@the_B.A.D. oh which upgrade kit?

It is in prototype from yet, but it is like the others ☺️ -Stainless steel cylinder head -aluminium piston with +100% weight -aluminium spring guide with ball bearing -steel cnc spring stand 😉 I need a few weeks for that, but when it is ready, it will be availabée on the shop 😉

@@the_B.A.D. hey do you know if they can take other VSR10 magazines?

Would be fun, to play it in the house of mirrors, but what would we do with so many broken mirrors, after an event? 😅

Thanks ☺️

Cool, a had a PPK/S decades ago, i loved it, but it wasnt a long-live thing 😓 Now i have the MK23 and a Storm Glock 17gen4 i love them, but i search for something more stylish 😉

@@the_B.A.D. ok

Which hop rubber do you use? Mine is running with modify accurate tan with brigded barrel, but for unbridged barrels the best is the maple leaf autobot 60° 😉 I dont have any experience with the rai zen, im using the stock barrel ☺️ Check the fps too with .20 and .28 g bbs, im running it with. 32g bbs, mine is shooting around 300 fps with .32g bbs 😉

@@the_B.A.D. I think I have unicorn or stock, it's black rubber which I cannot really remember if I have switched it. Anyway looking forward for your secret Hop up mod as well

If you are not sure if you swapped it, it was long ago, soo i advise to swap it to a modify or a maple leaf rubber The stock rubber (and other black rubbers) are very weak, you have to overhop it, and it causes a high energy-loss, with a good rubber, the system can use all of its energy The range will be longer But it is just physics, the heavier bbs will fly slower, but with more stability 😉

And you can use a shorter inner barrel, im using a 420 mm modify barrel, it gives a bit extra power and fps 😉

Thanks ☺️

Would be easy, i like to give the a bit chance 😉

and Beast 😍

Thanks ☺️😍

🤜🤛😉