bioMérieux University
bioMérieux University
  • Видео 185
  • Просмотров 558 709
BACT/ALERT®: Blood Culture Collection: Winged Set Method
Overview:
This video describes the steps needed to collect and inoculate BACT/ALERT blood culture bottles using the winged set (direct draw/butterfly).
Steps Included:
1. Identify the patient.
2. Have all the necessary supplies within reach.
3. Inspect bottles and remove the flip-top and clean the septum.
4. Assemble the winged collection set.
5. Select and clean the venipuncture site.
6. Perform the venipuncture.
7. Collect the Aerobic bottle first, then the Anaerobic bottle and finally any additional tubes if required.
8. Hold a gauze over the puncture site and remove the needle from the vein.
11. Discard the winged set into a sharps container.
10. Invert the bottles 3-5 times.
11. Label ...
Просмотров: 1 159

Видео

VITEK MS PRIME: How to Perform the Auto Fine-Tuning
Просмотров 287Месяц назад
Overview: The purpose of this video is to walk through the steps needed to perform an Auto Fine-Tuning on the VITEK® MS PRIME Summary: - Assemble all materials - Prepare the liquid suspension - Deposit the liquid suspension on all spot for each acquisition group - Program the Auto Fine-Tuning slide into the VITEK FLEXPREP software - Load the slide into the instrument and launch the Auto Fine-Tu...
BACT/ALERT Bottle: Fill-to Mark video
Просмотров 2493 месяца назад
Overview: This video demonstrates how to use the Fill-to Mark to optimize filling the BacT/ALERT® with the appropriate amount of blood. Information: - Provides a Visual target to aid the collector in drawing the optimal 10mL specimen volume in accordance with the package insert. - It increases the blood collection performance and eliminates the need to manually mark the bottles. - Shows the use...
BIOFIRE FIREWORKS: Installation Pre-requisites
Просмотров 1033 месяца назад
Overview: The purpose of this video is walk you through the pre-requisites for connecting your BIOFIRE system to FIREWORKS. Summary: - Review the BIOFIRE version requirements - Identify the files to exclude during the installation - Discuss FIREWORKS notification emails to enable - Explain MFA security Let's get started!
GENE-UP®: LYSIS WORKFLOW
Просмотров 1663 месяца назад
Overview: This video is to demonstrate the lysis workflow for the bioMérieux GENE-UP assays. Steps include: • Required equipment • Demonstration of lysis workflow Let's get started!
Configuring BIOFIRE FIREWORKS on the BIOFIRE SPOTFIRE System
Просмотров 964 месяца назад
Overview: The purpose of this video is to demonstrate configuring the BIOFIRE FIREWORKS for the BIOFIRE SPOTFIRE. Summary: • Pre-requisite installation requirements for connecting your BIOFIRE SPOTFIRE system • How to configure the BIOFIRE FIREWORKS on the BIOFIRE SPOTFIRE Let's get started!
BACT/ALERT Bottles: FAN PLUS Gram Stain
Просмотров 6474 месяца назад
Description
VITEK MS: Sample Prep - Bacteria/Yeast Using a Loop
Просмотров 4664 месяца назад
Overview: This video describes the reagents and disposables required for sample preparation using a calibrated loop to properly prepare bacterial and yeast samples for testing on the VITEK MS.. Steps include: - Assemble All materials - Add the Calibrator to the Calibrator Spot - Add a Bacterial or Additional Bacterial QC Organism to a Sample Spot - Add a Yeast or Additional Yeast QC Organism to...
BIOFIRE SPOTFIRE System Software 2024 Installation Video Guide
Просмотров 2024 месяца назад
Overview: The purpose of this video is to demonstrate updating a BIOFIRE SPOTFIRE system to the SPOTFIRE System Software 2024. Summary: - Preparing the required materials for installing the SPOTFIRE System Software 2024 - How to install the SPOTFIRE System Software 2024 - Verifying the successful installation of the SPOTFIRE System Software 2024 Let's get started!
BIOFIRE FIREWORKS: Dashboard and Software Navigation
Просмотров 2224 месяца назад
Overview: The purpose of this video is to understand the dashboard and navigate the BIOFIRE FIREWORKS software. Summary: - Know how to log into the BIOFIRE FIREWORKS software - Explain the dashboard and understand how to change the views - Display test results Let's get started!
VITEK MS: Sample Prep - Bacteria and Yeast the VITEK PICKME Pen
Просмотров 5234 месяца назад
Overview: This video describes the reagents and disposables required for sample preparation using the VITEK PICKME pen and nibs to properly prepare bacterial and yeast samples for testing on the VITEK MS. Steps include: - Assemble All materials - Add the Calibrator to the Calibrator Spot - Add a Bacterial or Additional Bacterial QC Organism to a Sample Spot - Add a Yeast or Additional Yeast QC ...
GENE-UP: SAMPLE PREPARATION
Просмотров 845 месяцев назад
Overview: This video is to demonstrate sample preparation for the bioMérieux GENE-UP® assays. Steps include: • Required equipment • Demonstration of sample preparation Let's get started!
BACT/ALERT Blood Culture Collection: Indwelling Cath Method
Просмотров 8295 месяцев назад
Overview: This video describes the steps needed to collect and inoculate BACT/ALERT blood culture bottles when collecting from an indwelling catheter. This is not a preferred method since the risk of contamination is increased significantly. Steps Included: 1. Have all the necessary supplies within reach. 2. Identify the patient. 3. Disinfect the indwelling catheter port as recommended by your ...
BACT/ALERT Blood Culture Collection: Needle and Syringe draw method
Просмотров 6 тыс.5 месяцев назад
Overview: This video describes the steps needed to collect and inoculate BACT/ALERT blood culture bottles using the Needle and Syringe draw method. Steps Included: 1. Identify the patient. 2. Have all the necessary supplies within reach. 3. Inspect bottles and remove the flip-top and clean the septum. 4. Assemble the syringe and safety needle device. 5. Select and clean the venipuncture site. 6...
MINI VIDAS: Cleaning the Strip trays Video
Просмотров 2846 месяцев назад
Overview: This video describes the steps required to clean the trays on the MINI VIDAS® analyzer. Steps Includes: - Powering down the analyzer - Cleaning the reagent strip trays - Cleaning the plastic tray - Cleaning the strip preparation tray Let's get started!
VIDAS: Cleaning the Strip trays Video
Просмотров 1316 месяцев назад
VIDAS: Cleaning the Strip trays Video
VIDAS 3: Cleaning the Strip Trays Video
Просмотров 706 месяцев назад
VIDAS 3: Cleaning the Strip Trays Video
GENE-UP: Introduction to the new GENE-UP PCR workflow
Просмотров 1,1 тыс.6 месяцев назад
GENE-UP: Introduction to the new GENE-UP PCR workflow
GENE-UP: PCR WORKFLOW
Просмотров 1,5 тыс.7 месяцев назад
GENE-UP: PCR WORKFLOW
GENE UP: How to Use the GENE-UP DECAP UP
Просмотров 6697 месяцев назад
GENE UP: How to Use the GENE-UP DECAP UP
ETEST: Multi Pack Handling and Storage
Просмотров 2357 месяцев назад
ETEST: Multi Pack Handling and Storage
BACT/ALERT VIRTUO: Changing the Maximum Test Time
Просмотров 2368 месяцев назад
BACT/ALERT VIRTUO: Changing the Maximum Test Time
COUNT-TACT® 3P® Plates Systems: How Open Plate Packaging
Просмотров 1108 месяцев назад
COUNT-TACT® 3P® Plates Systems: How Open Plate Packaging
COUNT-TACT® 3P® Plates Systems: How to Close Plates
Просмотров 818 месяцев назад
COUNT-TACT® 3P® Plates Systems: How to Close Plates
BACT/ALERT VIRTUO: How to Unlock a User Account
Просмотров 1648 месяцев назад
BACT/ALERT VIRTUO: How to Unlock a User Account
VITEK 2: Accessing Long Term storage
Просмотров 1798 месяцев назад
VITEK 2: Accessing Long Term storage
VITEK 2: Adding a Card definition
Просмотров 3388 месяцев назад
VITEK 2: Adding a Card definition
VITEK 2: Defining a VITEK FLEXPREP Cassette
Просмотров 2838 месяцев назад
VITEK 2: Defining a VITEK FLEXPREP Cassette
VITEK 2: Editing a Cassette
Просмотров 1408 месяцев назад
VITEK 2: Editing a Cassette
VITEK 2: Finalizing a Card
Просмотров 1108 месяцев назад
VITEK 2: Finalizing a Card

Комментарии

  • @jamsienicole4328
    @jamsienicole4328 Месяц назад

    Don’t you use the aerobic bottles first?

    • @biomerieuxuniversity6090
      @biomerieuxuniversity6090 Месяц назад

      Hello - When using a syringe, the anaerobic bottle is inoculated first to prevent changing the atmosphere of the anaerobic bottle by introducing air that may be present at the top of syringe. Additional information on this can be found in the bottles package insert. If you have additional questions you can also find support at 1-800-682-2666. Thank you.

  • @elhamNasiraei
    @elhamNasiraei Месяц назад

    how we can update our system to use kits? can you teach?

  • @akinleminuolubunmi4540
    @akinleminuolubunmi4540 3 месяца назад

    Beautiful

  • @Betobending
    @Betobending 4 месяца назад

    Is there any possibility a complete cassette is edited by a super supervisor?

    • @biomerieuxuniversity6090
      @biomerieuxuniversity6090 4 месяца назад

      Please contact CustomerService-IDAST@biomerieux.com as they can assist you with your question.

  • @LiberianGirl03lovemj
    @LiberianGirl03lovemj 8 месяцев назад

    Does it come with an user manual including the reference values?

  • @funnymei89
    @funnymei89 10 месяцев назад

    Hi, what happens if I forgot to click 'QC'? Will my atcc be run like a normal patient?

  • @Jjnvchhhhhhhj
    @Jjnvchhhhhhhj 11 месяцев назад

    How to define new ATCC strain within Vitek2 Setting

  • @youngwillard1226
    @youngwillard1226 Год назад

    Where would i find the computers name?

  • @telannabrown6850
    @telannabrown6850 Год назад

    Amazingly, I figured this out with the help of my site specialist over the phone. I'll never forget that day.😅😂😂😂

  • @lylebates4636
    @lylebates4636 Год назад

    Promo-SM

  • @mayraherrera3737
    @mayraherrera3737 Год назад

    why is it necessary to unplugged the instrument?

  • @fastdraw73
    @fastdraw73 Год назад

    Nice. No need to no longer blow the dust off using the blue bulb. Note that when the Vidas is turned off, the scanner may be at any of doors A-E, not just door A or B.

  • @fastdraw73
    @fastdraw73 Год назад

    Nice. No need to no longer blow the dust off using the blue bulb. Great job.

  • @maimonaijaz8829
    @maimonaijaz8829 Год назад

    How much time vitek ms takes to give results?

  • @mohammedalshafie1810
    @mohammedalshafie1810 2 года назад

    Excellent

  • @JoaoLucas-oj5tw
    @JoaoLucas-oj5tw 2 года назад

    cool

  • @faberobledo8237
    @faberobledo8237 2 года назад

    𝕡𝐫o𝕄o𝔰𝓶

  • @fastdraw73
    @fastdraw73 2 года назад

    Very nice video and great job!

  • @fastdraw73
    @fastdraw73 2 года назад

    Very nice! This should help customers that are unfamiliar with this procedure and will keep the downtime to a minimum while one watches this video instead of calling in for help. Good job.

  • @fastdraw73
    @fastdraw73 2 года назад

    Very nice! This should help customers that are unfamiliar with this procedure and will keep the downtime to a minimum while one watches this video instead of calling in for help. Good job.

  • @ZWPathLab
    @ZWPathLab 2 года назад

    Hii Biomeriux I want your products in large quantity

  • @ZWPathLab
    @ZWPathLab 2 года назад

    In which it usd