Видео

I can't believe I never saw this .. Seano was a funny man 😂 miss ya mate

Thanks mate worked for me,got more power cant believe the difference

New Zealand. First time watching was a bit confusing but I went bit by bit through a second time as I did the mod and it worked out exactly as you said. One person below also mentioned leaving the brown connector unplugged as well to disable the last butterfly. So I will do that too. Ideally I will take the manifold off and clean up all the intake system, as my engine has done 260,000 in the factory state. Thanks for your help

where does the car get the pure oxygen from?

Awesome run down, just done my zd30 following this video. Cheers heaps mate

Warning to anyone that does this ….. zd30 is know for heads cracking and either piston 3 or 4 cracking aswell the main cause for this issue is having a EGR block on your d22 causing the back of the block to overheat and warp then leading to blow head or piston

I'm gonna have to do this. Good explaining. About time

Thanks bro

You mentioned you get pure oxygen into the intake after the egr block off. Did you add an oxygen generator somewhere too?

Disabling the EGR Will destroy our planet.Have you check the north and south pole most of the ice are melted it means our planet is getting warmer. EGR eliminates the Nox emission produce by the diesel engine. Nox emission contribute allot in global warning. Think the future of our planet.

What does the swirl mod do exactly

finally someone is showing how gets done thank you very much!!!!!!!

How do I check for a boost leak on ZD30?

Brilliant. thank you!!

Anyone ever has to remove your injector pump

اسؤ محرك تصنعه شركة نيسان على الاطلاق لكثرة عطلاته

Reparei o motor não está pegar

My ZD30 only had the green and thd brown, can you advise on what to do.

This is the best egr mod I seen, easy instructions. Cheers mate.

Are there different types of zd30? Mine has brown and black solenoids only, no green.

My zd30 is totally different. Zd30-046050a

Awesome dude, thank U..

Terima kasih atas videonya, punya saya sama Nissan Frontier D22... 🙏🙏🙏

Sorry to lose ya mate. World's not the same without Sean Zemunik, miss you big time😟💜

You're spot on. Belt grip is useless. Makes the noise worse infact. One spray on bottom pulley with motortec and noise gone instantly.

A diagram of the finished lines would have been good lost me

So glad I found this video 👍🏻 Cheers mate your a legend!

20% more boost

Does supercheap have this?

Made simple and easy to follow, thanks. I have a nissan patrol 4 cylinder diesel 4x4 and need a replacement engine ,please help.0835871787.

I have so much dirt inside engine its unbelievable and no power. Will do what you advised tomorrow and let you know if there is any difference.

I know this is a little while after the video was posted but does this mod trigger the engine fault light? Cheers

Mate where can I buy this stuff, my ZD30 screeching like mad and driving me up the wall, replaced belt an tensioner and didn't fix it.

Question i just did this thanks to your video tho i am finding it nkw has a slight ringing type nosie of exhuats fumes hitting the plate i use a bjt of stainless steel that was laying around any thoughts

How much more power do you get

Whats a swirl mod ?

Hello from Colombia South America I have a Nissan Patrol with a ZD3.0 DI engine and I did the EGR block and it works great!! I have a question can I do the swirl to my patrol? My motor seems a little different I have an intercooler on the top of the motor Thank you

Thank you sir

unfortunately thats not actually the swirl mod, thats the egr butterfly mod. the swirl mod is simply unplugging the brownish valve. that stops the swirl valve from working and stops it restricting air flow in the low rpm. the vac pipe rearrange is to disable the egr butterfly while still keeping the "anti shudder" valve working. it is required to do if you block the egr, otherwise the egr butterfly reduces air flow which can cause lower effective compression. other zd30's like patrol/terrano do not need egr butterfly mod because they do not have it.

If you own a ZD30 and expect the engine to last and its done a lot of kilometers then its too late to block off the EGR as the soot is already in the engine, when i rebuilt my ZD30 i had 3, ZD30 engines to look at internally, after my rebuild i found the soot starts as soon as you drive it for the first time, what you have to do is take off the inlet manifold and clean it free of soot, there is no need to carry out the swirl mod because its an old wives tale, i have done 6000 klms since my rebuild which included a new complete head and my engine's oil is clean because the EGR was blocked off from new, there is no issue with the ZD30 heads apart from that they all crack between the valve and glow plugs on all 4, this crack has no effect on reliability of the engine as its just relieving stress in that area, this has been tested and proven by cutting heads up to find out, i work on diesel engine rebuilds my last engine project was a 2010, 4500 John Deere Powertech engine, common rail, cost $7500 in parts and machining, I have had no problems with my engine rebuilds as they are all done with 100% attention to detail.

Where would I get the swirl mod from ???? Really keen 🤤

Dont spray it on the alternator. Aim for the wheel below. The air con unit I think,

I ripped the entire egr system out and capped it off at the exhaust manifold. Works much better. And creates a good place for the egt probe

Cheers mate

Please sub to the channel. I have another large channel. I want this one to take off a bit. Will have more content soon.

Just a side note. Use a bit of goo on the block plate. There is a slight leak if you dont which really does make a big difference. But like most diesel owners it may drive you crazy knowing its there lol. Again not a must.

Thanks for the video mate. Easy to follow. Is the swirl mod essential when blanking egr or will engine run fine with egr blank alone?

Exellent video and tips, thanks. Did your fuel consumption improve much after the EGR block and swirl mod? I've just done both to my ZD30 but I did notice that our models here in South Africa doesn't have the 3rd solenoid with black plug on....

yea, really helpful video mate. like you said the rest of the shit out there has been a bit confusing... do you have to do anything about the egr or is just blocking it enough

best video i've seen yet. thanks