Видео

@@alejandromartinez7368 no, I'm still on the same tire.

@@JimmyS1981 it's white grease.

@@DerikBouffard okay kool thanks. And did you put thread lock on any of the bolts? I didnt watch the whole video. If you didn’t, do you suggest I use some and if so, should I apply it to the actual rotor threads or the threads on the actual spacers?

@@JimmyS1981 I didn't put anything on the studs. Just torque the spacer to spec like you torque the wheels. I know some People add either anti-seize or thread lock but I don't. I remove these spacers every year, so I want to keep it easy to remove. That's also why I add white grease between the rotor and the spacer.

@@DerikBouffard thanks ! You know what would be helpful !!?? If you can post a video on how to apply torque specs. I don’t know anything about it or what the torque numbers “mean”

If the pull cord dosen't engage, the bendix is not the issue. Out of the case the bendix will be a little loose. I'd look at the pull cord cam, it might not work properly.

@DerikBouffard thank you, I'll have a look at it. First real clue in days.

@DerikBouffard yea man, that was exactly it. The little spring behind the pall was shot, I had another recoil laying around and replaced it and sure enough, pall is engaging, once it's light I'll put it together. Kinda a newb, thanks places I called were telling me to get a new wheeler.... lmao 🤣

Running like a champ, I owe you one.

@@Brave_Heart333 I'm glad I was able to help you !

No, you would need to convert the Quad to a 12 volt circuit.

Yes, one shock can become weaker than the other. Usualy, when you see a difference in height it will be the springs.

@@DerikBouffard thanks

Nice ! I've never heard this intake, I'll take a look.

Not that I remember, I did a lot of highways and never got annoyed by this exhaust.

Yes, I have a set of airlinks leveling kit installed on the front. These tires have not rub with the spacer and the leveling kit.

They're not the same as the magnum/xplorer. I found these ones on eBay. The oem parts number and dimensions are in the description, compare it to yours. www.ebay.com/itm/265120751313?fits=Model%3ATrail+Boss+325%7CMake%3APolaris&itmmeta=01HVRS01EHC9CBP42RPTA8XBNQ&hash=item3dba6d9ed1%3Ag%3AtbQAAOSwE6BjKMpy&itmprp=enc%3AAQAJAAAA8LKcAx0ytd2zV%2B75Xg8N1Bybqsm%2BGuPVjXYLSjo9V%2BImeWZwoMi0n1yEH9Lp0Y06e9DqcVG6al8Tw%2Bi7%2BNZkdx2I4YSBJ0tBIxpGOexckbIIJBWXfzxfJi%2B1%2Bts30BA61LI3XwM1a%2B2IK1kyGpc2FsLl3nwEs%2F%2BjGCkEVCfspro%2BiQQcwuizYzv%2FJ4uGlfEi708bCAY7GOKCRtQBkvuqWeJEamHPSNihQezZuWM0yLGLNJmsLniyJDusF98w4h4YKz72rBbx4gh37ea0PnS5LnuGV98JuPH0Ltj%2BLthoqRJLeSZ8mevljJw8oFRQpfX2zA%3D%3D%7Ctkp%3ABFBMrpeAmd5j&LH_ItemCondition=3

Mines not a magnum I should be good then

It's setup as it came, straight out of the box. ! It worked well for our application !

Loosen bolt. Remove pack. Loosen plug. Remove plug. Reverse.

If you can’t tell what’s being done just by watching the video, maybe go back to eating glue again 😂

Put some penetrating oil. Remove completely the 2 bouts ans try to pry the base open with a big flat screwdriver or a punch. I'll give it more room.

Yes, it has a silicone gasket when I removed it the first time. I don't put it back because I'll remove the cover again and I don't go in deep water.

Hi, I'm confident a 265/65 will fit without a lift kit. I have a leveling kit on my GC but it's for the look not because of a clearance issue.

I have them on my 2020 Laredo. It fits fine without any lift.

Salut, oui je pourrais faire ça, par contre je suis pas encore rendu la dans mon entretien. Si tu as des questions je peux peut-être t'aider si tu m'envoi un message sur instagram.

The shock should go in 6 or 7 inches

It looks like the kit I have is no longer available, ARES release a updated kit : www.amazon.ca/ARES-11053-3-Piece-8-Inch-Magnetic-Swivel/dp/B09HJWZY2M

Yes ! I replaced it more then a year ago.

@@DerikBouffard do you have the part number for the bendix. I order the starter but i cont find a part number For the bendix. With the same brand.

@@1Wayfix here's the link : Starter Drive Bendix Replacement for Polaris ATV Sportsman 335 400 450 500, Places# 3085394 3087030 SM1329850 SMU5003 a.co/d/2Hse3Sk

Sorry, I show the last one because I thought it was the hardest to do. I didn't had any difficulties to change both spark plugs on all 8 cylinders. Can you tell me wich one is hard to reach ? Thank you.

Glad this video helped you ! Sorry I can't test it, It depend what year is your Jeep. Mine is a 2014, so the light over the rear door are simple bulbs. If you have a chip board like the map light in the front, my guess is that you could open them and use the same principal as the map light. But I don't have any exerience on these light. I don't even know if you can open it. If you decide to try it let me know !

I was able to change out the ones in the back using the same video, they are easier to remove if your car has a sunroof. I will see if I can attach any pics here for you.

@@DerikBouffard my Jeep is 2021, I'll try it, I'll let you know how it ends 🤣🤣, thank you 🙏🏻

@@kinsmen1764 That would be great and very helpful, thank you 🙏🏻💪🏼🔥

@@JoseOttati01 Great have fun ! hahaha

He showed the hardest one brah

True ! I found the bolt on my work bench maybe 2 weeks later and put it back haha

since they are from mopar / OEM they come pre gapped

@@jhwstar3 Yes, nowadays spark plugs usually come pre-gapped for the most common engine type that uses that p/n plug. But any good mechanic will tell you to always double-check that gap (on each and every plug) with a gap measurement tool before installation (and also if you accidentally drop the plug on the ground or hard surface). It only takes about 2 seconds per plug to verify the correct gap (& 6 seconds more to adjust it, if necessary). With 16 spark plugs needed for this high-tech V-8, it's highly likely that the gaps on one or two plugs might be a little off coming out of the box. But then I'm a little O.C.D.

O'Reilly's sells pre gaped plugs.

Yes you can just swap the old one for the new one. In my case I found that relocating the boost solenoid make it easier to reinstall.

@@DerikBouffard Sounds good, thanks for the info

9-14.8 VDC, all the specs are here www.superbrightleds.com/little-dot-smd-led-accent-light-ld1-x

You can find Mikuni carb for this quad on eBay.

@@DerikBouffard got a link bubba ?

@@Donttreadonme95 www.ebay.com/sch/i.html?_from=R40&_trksid=p2334524.m570.l1313&_nkw=polaris+3130498&_sacat=0&LH_TitleDesc=0&rt=nc&_osacat=0&_odkw=1995+polaris+300+4x4+carburetor&LH_ItemCondition=4

Thanks ! I've read about this too, but it's been over a year now and I didn't notice any vibration at any speed.

Not all but yeah I had to fill it up after the install.

@@DerikBouffard ha! Ask me how I know! I was laying under the car and when I pulled the axel free, the trans dumped all over my arm and chest 🤣

Surely you could remove the existing LED and solder a new one on the board. You'll need a smaller and thinner LED than the one I use. I'm not the most meticulous so this way was easier for me.

It won't add any HP and I don't think you'll notice a better throttle response. It's mostly for the sound at this point.

Sure if your plugs have 115k miles, put new ones in will help ! you might not get back all the MPG you've lost but it should improve it.

Absolutely would be a big factor if the plugs are fowled up. Sometimes the plugs can still be good though even at 115K miles, but you should change anyway.

I got 170k miles on my original plugs still getting 20 mpg highwy

to solve the problem I connected the cables of the LEDs purchased to the 2 normal bulbs present in the body ... now everything is ok🙂

I didn't have to. You only have to shorten your studs with certain style of wheels. For me the 1'' spacers fitted on my 18'' wheels but not on my 20''.

​@DerikBouffard I have bought a set of 1" spacers for my WKII JGC, but I have 20" wheels, will they not fit? Plus no one locally wants to fit them. They say they are too dangerous. I want them on but worry they will fail, is this likely? Thanks in advance

Where did you purchase thr led lights from?

Obviamente el modelo, los lúmenes y el color cambiarán el resultado de la iluminación. ¿Usaste los mismos LED que yo? ¿La iluminación también es tenue para el led interior y exterior de la luz trasera? Si es así diría que es por el modelo de led.

It's hard to tell, but you can look if your Spring is properly seated on the top and bottom. Maybe the shock is not all the way down in the hub.

@@DerikBouffard can i snap it to you. i need assistance

Yes, it should fit ! It's the same turbo and engine has you said.

www.remark-usa.com/products/muffler-delete-for-lexus-is?variant=18241816756320

I got a grand Cherokee 04 I want to add some 20" on it as well but I need spacers since the rims didn't match the lug pattern on mine , did I get to add spacers? If so which ones u went with