Видео

hi, nice tuto with vyper, i jts try to find new update setting , but im lost in g code, so i just copy past but the order is like this G21 ;metric values G90 ;absolute positioning M82 ;set extruder to absolute mode M107 ;start with the fan off G28 X0 Y0 ;move X/Y to min endstops G28 Z0 ;move Z to min endstops G0 Z0.2 F1800 ;move nozzle to print position G92 E0 ; specify current extruder position as zero G1 Y10 X180 E50 F1200 ;extrude a line in front of the printer G92 E0 ; specify current extruder position as zero G0 Z20 F6000 ; move head up G1 E-7 F2400 ; retract G04 S2 ; wait 2s G0 X0 F6000 ; wipe from oozed filament G1 E-1 F2400 ; undo some of the retraction to avoid oozing G1 F6000 ; set travel speed to move to start printing point M117 Printing... G5 is it correct or doesnt matter?

Would have been great if you had shared what settings you used.

Any chance of a update for input shaping?

i followed the stepps but when i went to flash the lcd theres one line of code that wont show up but it does in the video any help please

Good info. But a little more explanation of how to get into the software to make these changes would have been helpful. You didn't mention how to do that if my printer isn't connected directly to the computer. What kind of wires to use, etc.

How does the wash & cure step work tho??

Good morning I just received this printer. When should we put on the protective screen?

this micro-SD card config worked for me: - MBR (not GPT!! the SD-Card will not be recognized) - 4GB size partition; - 4096 KB; - FAT32; - Prorgramm i used: MiniTool PartigionWizard (free)

I see you use / make custom firmware for the Vyper. Do you remmend upgrading to a custrom firmware?

Tell me please what thickness of leveling paper? I have lost it.

What do you have under the laser cutter?

Overall great tutorial. Only thing I would have added (sure I figured it out myself) when it came to the E-step calibration you could have said that your value 98 you use for the calculation is simply 100 minus you measured offset. Just so every noob would get it. But that is a veeery tiny thing in a great video. thanks man helped me a lot

Sorry for the long comment but 1st of all great video as always I do appreciate the time and effort you made to bring such a quality description, 2nd as a Zbrush 3D sculpt user and also having Anycubic Photon M3 - if you want a true test for any 3D resin Printer you should look for a "head bust or Cloth" with a heavy bumpy skin texture on it, otherwise, you won't be able to see the true capabilities of the printer - usually, if I want to print a figure, for example, I tend heavily to increase the details so that the machine can bring them to life , no matter which printer you have what ever 2k or 12K , What makes it stands is the sculpted project itself

Mine doesn’t go higher

Can I send you my Kobra for calibration? Lol

Do you have a profile for this printer cr-m4 having trouble with retraction. Do you have it set for?

Is there a way to do the Esteps without physically connecting the printer amd PC? Mine are in different rooms

He does not have a screen protector?

My lines all narrow in the center when I did linear advance test. Not a single one is nice and even. Please help. I also do not get an m900 returned when I send m503

Bonjour 😊 super vidéo très claire et bien expliqué 👍 un grand merci pour cette Excellent travail 😊

If you would be so kind, what model accelerometer did you use, and what is involved in installing and taking advantage of it? Thanks, Greg

It helped me a lot because before, the printing errors were very noticeable on my prints, and the printer didn't want to start the print cooling fans. However, I copied these settings, and now everything is working perfectly.

How did you get the number 98 to divide 100 by?

Did you have to adjust the zoffset or did it set it automatically?

im looking into buying a 3d printer for d&d terrain and minis. would one of these be sufficient or would i need some sort of "hardening" device? i have no idea....

Hello friend, can you help me with the Vyper firmware?, I don't want to spoil everything and I want to find out how to properly flash it with the zombie 2.8 version, please help, thank you in advance)

cannot find any videos explaining your firmware setup and calibration. would have tought to find something on your channel but no luck

Hello thanks for your videos, I can’t get mine to connect I have it pluged in to usb on computer any ideas? got connected had to restart program then I got a different port

Every reviews on these machine look great so I don't understand how we could have purchased one with miss manufactured parts, it's turning into a nightmare.

Hello! What are the printing parameters that you are using in this printing?

Hello Installed Zombie 2.8 on my Anycubic Vyper 3D Printer. Tried using the "Pause at Height" and "Filament Change" The printer Paused at layer 12 then I changed the filament hit the pause button and got this error Waiting for cache command to complete and the printer just hung there had to power off then back on vyper. What is wrong?

Clear and concise! Many thanks StudioZombie 3D. Your time is appreciated.

thank you very much. What machine limit should I have in prusa slicer? The time estimation is very wrong since i flashed your firmware (2.8).

Thanks for this tutorial, Ive followed it twice and in both situations, I only get 0, 0.5 and 1 when printing the K factor linear calibration pattern. How can I make it print more lines? Thanks again

Great review - have you tried the Creality Sonic pad ? Thinking about buying one of these But I’m wondering how it handles a little bit more speed like when running clipper with a sonic pad

Picked one up this Black Friday hope it arrive soon :)

Picked this up on Black Friday sale. Excited to give it a go

almost 1000% awesome Mine has a temp wire Im lost on. The instructions are very unclear

Impressive machine indeed!

Nice job Will - love seeing your product reviews

Yea brother your back 💪

Hi How r u i need help with my Vyper please is urgent can u help me ??

Thanks for your video. I'm testing my linear advance, and all the lines look the same to me. None of them seem to be better or worse than the others. Any suggestions on what I should look for or settings I shuld change?

Hello, I have installed your firmware for the Vyper to use Linear Advance. The flashing worked without any problems but unfortunately it does not print the LA calibration pattern. It prints the first line (K0) after that the lines are incomplete or not printed at all. It also does not print the numbers next to the frame. But I did everything like in your video. Do you have any idea what the problem could be?

Any chance you can pass the best settings on I use normal pla or silk pla I have a kobra neo bought this one because my pla was getting jammed in the hot end would not release and had a noisy fan on start up credit to anycubic they did send me a new hot end and psu 😊😊

I bought an Anicubyc cobra max printer and it did a few prints with a satisfactory level of quality and then it started to have under extrusion the whole object has holes in it. I tried various flow and temperature settings and a lot of other things, but there was no change for the better. Then I wanted to do an e-step calibration with the pronterface and I noticed that the extruder stops three or four times while pushing the 100 mm filament and then continues, regardless of whether it pushes the filament through the hot head or directly from the extruder without a bowden tube. There is no way I can set it to push exactly 100mm, it always has underextrusion, sometimes by 25mm, and it always pushes less than 100mm. The gears in the extruder are good and clean. Could you give me some advice if the problem is in the motor, the motherboard, the voltage that the motor receives or what it is about. Thanks a lot.

This is brilliant thank you very much, is there any chance of a similar video for PETG in Cura for the Vyper please, have got some resonable prints but if I add supports the print ime rockets from 4 hours to 5+ days!

Soo helpful! Thank you so much!!

What slicer did you use and how did you input it into the slicer? i have cura and it isnt an option to select.