Видео

Are they worth it? Might pick up a set today

I have the star shaped bits but there is a piece in the middle of each of the screws so i cannot fit my bit in. Is this a special set of Allen wrenches with a hole in the tip so they fit over that piece in the screw?

Usually the quick release versions are unserviceable, so this is very interesting. Looks like it's discontinued by ARES though, figures.

You're all over the place with your measurements. The zeroing wasn't off by 2 mm, it was 0.02mm. Then later, when the diameters were off by 0.08mm, you said 8 thousandth's of an inch. It's 8 HUNDREDTH's of a millimetre. C'mon man.

i have the same one and my hub is slipping and i don’t know what to do about it can u please tell me some tips possibly?

No there's actually more in America. And thank you for watching our video and using our information. We did learn back after we did our video that there's even more bikes because I was going to buy another one of these and it was numbered in the 900s I reached out to my contact at SE bicycles and they still have not gotten back with me I have been waiting and waiting and they still have never gotten back with me and frankly I'm a little pissed because they won't tell me exactly what's going on So to my understanding there are over 1200 of these bikes so 250 In America is incorrect I have not been able to update a video because I have not gotten the actual information as of yet still waiting for SE bicycles to contact me I'm going to have to try to reach out to them again The dropouts are where the wheel connects to the frame that is standard on every bicycle. If you noticed the tires they are the tread pattern The vans shoes bottom tread underneath the shoes is the same tread as the tires and the grips... 250 was a fair deal The bike is beat up pretty badly It's a shame that the guy did that to that bike. And missing all the parts he probably sold them off because they're hard items to find and someone will pay a pretty penny for them That's just my speculation... I also could be wrong the guy could be completely negligent and lost the parts why and how I don't know but someone it would buy a bike like that and spend as much as it costs new and then lose parts like that I just would find that very odd that it wouldn't be taken care of with the cost of what it's worth I can safely say that owning one. You can see it in our videos BMXMayers

「v-44985」 is this tool's model number.

I'm not sure if i made the right decision i order 3/8 and 1/2 drive wright impact sockets and 1/4 drive proto sockets, i got the 3/8 wright sets and both had 2 defects, i got one of the proto 1/4 sets and all of them are perfect quality I'm still waiting for the other sets to show up but I'm starting to think i should have gone proto everything

Tengo el tercer modelo de Craftsman, el selector es de plástico de igual forma el botón para sacar el dado, me hubiera gustado que fueran de metal, sabes si venden repuestos de metal? Muchas gracias por el video.

I've been wanting one of these but I've been worried about the double paws. I know their staggered to get the 120 count and was always afraid first time I clean the ratchet I would knock it out of alignment (both paws falling into the same position). Is there some design mechanism which prevents the paws from landing on the same tooth or do you just need to be extremely precise when reassembling?

Did you get it for least under $1,200?

What size wheels are they I need to change mine

Thanks again for this Brother. That is a great looking bike for sure! God bless.

Thanks Brother for sharing another fine bike with us. God bless and keep it coming!

l forget very quickly what food to eat for the brain

Tell me what food should be eaten to sharpen the mind

Choose: Wright or Williams?

I love my Dk Sprinter

Thanks Brother. Interesting. God bless you.

Interesting info, thanks. That little piece of plastic has tiny little tabs that's hard to capture in a video, and can really going flying if you're not careful. I have the quick release version of this (BP-1338QR) which was actually cheaper ($25) than the non-QR version when I got it. I've been using superlube oil (51004) and haven't had any problems, but am guessing you were referring to using the superlube grease which is too thick or sticky.

Is that brake caliper grease i was jw..

It's a 43 tooth!

Thanks Brother, God bless.

I don't like to criticize anyone who makes videos to try and help others, so I appreciate you trying to help, but I would like to bring up a point that you may not have considered. You never break a tap, in the real world, by hitting it with a hammer to break it off. The tap will break because it "binds up", and you keep trying to turn it, and when it snaps, it is really "seized" in the hole. If you just run a tap down and then artificially break it off with a hammer, as I think you said you did, the tap will not be hard to remove, because it isn't "seized". Anyway, thanks for the video, and I hope I understood you correctly, that you did indeed just artificially break the tap off???

I love mine....i use as my emergency road side kit.

if the mm didnt work, try the sae.

Wish I could get this in England

That is ridiculously expensive.

Thanks, I think I'll just remove the screw to lubricate this, don't wanna spend 45-mins fiddling with it.

I wonder if there's a company that sales a compatible kit with 90t that would fit this ratchet and make it it's as good as a gearwrench or Carlyle ratchet 🤔

Have had it since fall of 22 it's got some power and will break loose a Trailer ball hitch

Do you really need 1/4 magnetic impacts? Usually chrome can rip the fastener heads off with not much effort so can't see a need for 1/4 impacts. If I need an impact, it's 3/8 or 1/2 inch. I do like magnetic sockets and drivers, but it's not usually a big deal either. I still gave you a thumbs up as this was a great review for those that want something like this especially for $30.

My bad! I confused the similar posts! Funny.

Good morning Brother. Looks like my earlier comment dropped. I thanked you for an interesting post. I thought those must be spring loaded the moment I saw them. Thanks and God bless.

Thanks for this review Brother. When this post started I wondered if there was a spring in there. I like the look of these. Thanks again and God bless.

🇺🇸

Just to let you know the "B" stands for bare tool, have a great day!

Thanks Brother for a good review. God bless.

Hi mate am England and on amazon now we can get tekton and craftsman v series am in need of a 3/8 flex head and i really dont know witch i should get your opinion will be appreciated

God told me this is made in Jina.

Is it the Pro or the Dr version?

Your thumbnail photo isn't the model in your video.

How does it ride? Im a new father and I want to get back into bmx so the price range looks good but don’t wanna spend 200 if It’s not worth it thanks for the video!

Fuckin Christ mate why’d it have to be so long

Their going for $60+ now on the ebay. I have a set in package on marketplace for $70 (to negotiate) right now and people are clicking on them.😮

Thanks Brother, held my attention. You are very industrious! Most of the rest of the country would have thrown it out and bought another one without even trying to make a repair. God bless you and thanks for your prayers, my family and I suffereed no harm from the effects of the hurricaine. So many others are suffering.

Yeah I'm thinking it was the Chinese one that had that sandpaper like feel that was a couple years ago Ace Hardware and I don't remember the country of origin I just know it wasn't USA you done a very good comparison I think the tolerance might have been a little better on the USA despite the fact that it has wear and tear I'm assuming if the USA wrench was new it might have won that but to find a New Old Stock Craftsman wrench would be like pulling teeth maybe not so much if you go to eBay route the most Craftsman tools you find I've been used quite a bit thanks for sharing my friend I was looking forward to this comparison

Wish i keep all my craftman back when i started in 2011 only have a few 😢

Maybe just the tag was made in INDIA?

I'm overseas (Europe) and the Indian made one looks good (for what it is) however, I'd take the American forged one any day of the week. We Europeans are all about quality and tradition, which means tools must be made in country of origin, we will (largely) ignore tools that are not made that way. Added. Exception to that rule are cordless tools (we have few domestically made options, basically only German made) out of necessity. @OP Appreciate you sharing this.