- Видео 16
- Просмотров 95 270
JaySeas
Филиппины
Добавлен 16 июл 2021
Solving ETA (same signs, different signs, crossing IDL, crossing GMT)
Being on time at your next call depends on the demand what your ship carries. That is why we get the estimates of distance, speed, and time. And in this video, I'll show you the process of calculating for each.
Просмотров: 251
Видео
How To Setup Your Radar for Collision Avoidance
Просмотров 4,7 тыс.5 месяцев назад
Radars have so much to offer when it comes to collision avoidance. But sometimes, a little of "too much" may boggle you up. So, in this video, I'll show you my own setup when navigating in congested waters. A simple setup and yet effective on so many levels.
Stenciling Overhead Load
Просмотров 2206 месяцев назад
Some ports require caution or warning posters on board a vessel and lacking these items may cause the vessel to fall below the standard. As our vessel lacks a specific poster, I made one from scratch.
How to replace the Rocket of a Line Throwing Apparatus
Просмотров 7976 месяцев назад
We define rocket science as something difficult to learn or understand. But the rocket we’re about to discuss and replace may quite be the opposite. Just remember to consider safety as the top priority. Because a rocket is still a rocket.
How to Decommission an EPIRB
Просмотров 3347 месяцев назад
Just like a war veteran, they too need a retirement. Well, more of a decommissioning. A little harsh if you see it that way. But, it served its time and everything comes to an end. So, in this video, I will show you how easy it is to decommission an EPIRB Unit.
How to be a Third Officer
Просмотров 3,6 тыс.Год назад
There's always a first time for everything. And what better way to know it beforehand. Here, we'll focus on the main topics when it comes to being a third officer; what to do, what are the responsibilities, and more.
Securing Deck LSA and FFE prior Sea Passage
Просмотров 1,2 тыс.Год назад
The weather at sea is really unpredictable. Good to be prepared than regret doing nothing. Here is a video of how I secure my deck equipment.
How to replace an MOB Marker
Просмотров 4,7 тыс.Год назад
One of the easiest items to replace onboard, the MOB markers may just be a plug-and-play setup if you're replacing it with the same item. And in this video, that's just the case. Hope helps. Cheers.
How to replace SART Battery
Просмотров 2,9 тыс.Год назад
Having trouble or doubts when renewing your SART Batteries. Well, worry no more. Here's an in-depth procedure of renewing your Search and Rescue Transponder Batteries. Applicable for Tron SART20 units only.
Setting up New Flags and Halyards
Просмотров 20 тыс.Год назад
Setting up your newly received flags may be mind-boggling. Even I've had challenges with it in the past. But worry no more because all you need to know in setting up your flags and including the halyards are here.
How to stencil a Lifebuoy
Просмотров 14 тыс.Год назад
Having trouble stenciling lifebuoys? Worry no more. You're in the right place. Know the step-by-step procedure on how to stencil life buoys and how to stencil on its curved surface.
How does the HRU work?
Просмотров 8 тыс.Год назад
All Seafarers know the HRU or the Hydrostatic Release Unit and how it works. But, do they know how it really works?
Panama Canal Time-Lapse
Просмотров 64Год назад
Here is a complete start to finish time-lapse video of our transit at the Panama Canal.
How Ships pass the Panama Canal
Просмотров 2 тыс.Год назад
In this video, I'm gonna offer you the best seat in the house. I will show you how we, seafarers, cross the Panama Canal and also give you a simplified idea how this "Water Bridge" works. Just a brief overview to some, the Panama Canal works by moving ships from one ocean to another through inland waterways. But because those waterways lead down to sea level, six lock chambers (three on the Pac...
How to make stencils onboard ships
Просмотров 30 тыс.2 года назад
This is a step-by-step video on how I make a warning sign with zebra marks on one of my projects onboard. Hope you like it.
Great info sir!! Would appreciate it if u continue making informative videos.
@@ohmygodmax thanks sir. I will!
Taylor Gary Rodriguez Christopher White Amy
Finn Avenue
hello sir. bakit hindi nka STW ang speed settings niyo? thanks
@@juliusmarkgabon4722 dapat nga naka STW yan sir. Thats on me. Haha
@@jcteruel8153 ahh ok. Haha but anyways great video lalo na sa mga aspiring and new officers 👍
@@juliusmarkgabon4722 salamat sir! Appreciate it!
Leonie Turnpike
Omg
sir are you relative to Jaywalkur?
@@jovaeldelrosario3481 tha car vlogger? No haha 😅
yes sir.. your both good English speaking and tone.. na isip ko bka kuya mo sya.. follower rn ksi ako nun..
Haha salamat sir! Nakikinuod rin ako sa vlogs nya kasi
What is white button on top of HRU ?? Next to text on it
@@amirkargari4883 asked myself the same thing. There's no clear description of what it's intended. But, i think it's for the air inside to escape once the diaphragm is pressed. That's my hypothesis 😅
Amazingly explained in a short video
Thank you! Cheers!
Excellent work
hi third officer your is my motivation i'm deck cadet same with you befor as third officer, third i have question how much measure snape parallelogram standar imo i want make third for my personality becaus make easy working that is template marking
and what is type font for lifebouy, life raft , snap back zone, and another marking third yups standar imo thank you so much sir i hope your can answer my question i need your help i want make,try and learning grow up skill stencil
I am glad that I will never have to listen to that background noise ever again. 😛👎
@@luckycruiser likewise 🤓
Everything is easy to duplicate. Every detail is visible. The directions are clear and easy to follow. Now I can finally fly my flag!
@@ransleighdimpter I appreciate it, brother!
Could you just use bowlines at the 2 ends of the flag halyard through the flag holes or is there a reason these clips are needed?
@@33Templeton i have tried using bowline but it's kind of bulky for me. I needed a much cleaner knot.
@@jcteruel8153 The double-fisherman's knot is more secure, attractive and a bit less bulky than the improvised clinch knot (a.k.a. halyard knot). You might wish give it a try. Using white electrical tape rather than black presents better. I use nothing but double fisherman's knots/bends to attach a halyard to a flag, or to snaps. The working/bitter end gets trimmed, melted with a lighter, then mushroomed into the end of the knot - will never come undone. No dangling end, no whipping, no tape. Using the "bend" version of the fisherman's prevents the attachment loop from collapsing.
@@JohnGreen_US thanks for the tip mate! Will give it a shot on the next halyard project!
Addgbbn l
Good work
Well explained sir.
Great job
Sir pwde po bha makita paano mg gawa ng stencil sa cumputer paano sya m m print n tama ang sugat sa A4 n bond paper. Salamat po sir.
Meron akong clip dun sir sa lifering stencil ko na tutorial
Amazing content Need more videos ❤🔥🔥🔥🔥
How many weeks or months the sailors stay onboard for ?
6-9 months
What paint did you use?
I use alkyd base paint as it is good for outdoors.
Amazing vedio with fabulous explanation...keep it up officer 👏
Thanks! ❤️
Uploading more such videos related to third officer duties will genuinely help. Thank You. ❤ Best!!!
Thank you!
Best Videos for a third officer in making. ❤️
Man, please make a video on how to prepare documents for arrival to the port. I understand that each port is slightly different, but the plus and minus are the same
BS, If you keep on maintaining LSA FFA, Taking inventory, learning new things then who will do the company's useless and unnecessary paperwork ?
It's how you manage life, bruh.
Hello. When does the smoke signal start emitting smoke? Only after contact with the water?
Negative. Seconds after the release pin is removed will the smoke then start to emit.
good day sir...iam from indonesia and i just finished my academy and i have Certificate of competency III and other Certificate of proficiency do you have any job's that i can apply. thank you
Sorry sir. Im just a crew here vlogging hehe
thank you sir 🫡but is it possible to me to being a crew there
@@erydhanniewirayuda4823 our office is located in the philippines
Can you do 1 video about gyro and magnetic compass?
Solving for its errors?
@@jcteruel8153 yes
@@jcteruel8153 yes
i would really glad if u can publish the book at 2:48.i really want a copy of book like that
thanks. it's my personal notes.
@@jcteruel8153 Nice, consistent handwriting - from a graphic designer & calligrapher :) It was interesting to see how you dab paint onto a stencil rather than using an aerosol.
@@mikew3194 thanks man! I prefer a thick layer when doing the stencils onboard a ship
Bravo ❤
Unbeatable content bro❤
Thanks, brother!
@@jcteruel8153 keep making more LSA/FFA vedios like this of all practical safety work....I love this vedio specially as u have dismantle HRU astonishingly!!.. IT'S INCREDIBLE WORK the way you have explained 👑
Youre a Legend
Thanks, legend!
out of what material are you making the stencils??
Old paper charts
I think they must amend this MOB smoke and light signal to AIS-MOB, more effective and easy to locate because it will send signal to VHF DSC and ECDIS. Also, it is good in maneuvering recovery
I fully agree as well!
You are very fast to follow step by step please easy2 so that we can follow
Yes. Noted. ✌🏻
really the best way to do this. At my time i was creating my own way, and afrer and after i had some small mistakes, which i could awoid by this guide. Thanks for this video, hope it will help a lot of 3rd officers later on.
Thanks, man! Glad to help!
is this one of the jobs of OS onboard sir?
Making and cutting the guide is mainly the 3rd officer's job. When applying, it may be for everyone. So that includes the OS.
I guess I now have an idea how to mark my flightcases... thanks man, good job
Right on, man!
Wow... i was looking for exactly the same xD
Good seamanship please always provide us a good and tricky things of seaman job on your channel ♥️♥️
Sir I can’t do this
Which part sir
@@jcteruel8153 3.55 / 4.10 I can’t put like you and you second video stencil lifering 1.18 / 1.28 between can you help me please sir
Sir please tell me how you can do this excel because I can’t find front size in excel program I like you channel please help me
Appreciate it brother! Try seeing my other video about the lifering. I had a detailed explanation about that.
@@jcteruel8153 thank you because I use excel 2019 I can’t find it
@@captainblack5940 doesnt matter i think. It all works the same
@@jcteruel8153 sir this post 2.16 minute between 2.20 minute I can’t do this. I saw you lifering video but I can’t. I can’t make it size maybe my excel problem
Nice work
Only fitted hats allowed
I really have enjoyed watching your videos. Super interesting watching you work. If I may ask you a technical question, I see you are moving fairly quickly as you stencil with the paint roller. Your stencil prints appear to be sharp edged images with no paint bleeding under the stencil. How is that accomplished? Most stencil artists say you have to offload the paint roller and make multiple light passes but you seem to be very successful in applying a heavy coat of paint and move rapidly. Could you give me any advice so that I might have success? I am an older person wanting to try to stencil at a business and need good advice. Thanks for your videos, they're very fascinating to watch
Hey thanks man. If you really want an instant heavy coat of paint, try using a foam like what i did in this video. On paint rollers, i too use minimal amount of paint and make 2-3 coats just to sharpen those letters. Using too much paint on a paint roller will cause paint to sip through the stencil guides. You could watch the other stencil video on my channel.
@@jcteruel8153 Thanks very much for the information. I will keep watching your videos. You do great work, Looks super professional. Merry Christmas to you and yours and a very Happy New Year. 🙂🎄🎆
@@rtea7 thank you so much sir! Happy holidays as well
Solid videos! Akala ko nung una foreigner. Salamat master
Hahaha salamat master!
What a great channel 😊 i wasn't expecting to see such a low number of subscribers
Thank you so so much!!!
😂😂😂
Thank you Sir….