Видео

This video saved me $300! Thank you

Thank you so much worked in 5 minutes after i used your method

Going to try this first befoee checking the secondary spring inside the front latch. Then the puller handle inside the van is the 3rd check spot.

DIdn't work for me - still blue & red flashing

No need for torque wrench?

Sweet

Thankyou so much. It worked for me.

So what happends if you have the remote control? Can u still do it

Thank you for this video! worked perfectly. I literally used a spoon 😂

I recently bought myself an rx 6800 sapphire in a good online store and started playing - in some games everything is fine, in others a solid green screen pops up, an unpleasant repetitive squeak and the problem with rebooting was solved by lowering the video frequency of the core from 2300 to 1700, but you understand that this is a 20% loss in performance, which I did not like at all. Having climbed the entire Internet and forums, I could not solve this problem in any other way, neither the temperature, nor the power supply, nor the processor are to blame here, everything happens only on this video card, which on my last 1050 for 8 years there were no problems. I returned it back to the store, they said that the problem was in the firmware, they slightly changed the firmware (at home I noticed that the firmware was really changed in that the min and max periods were different). The problem was not solved at all. more additional information - in some games the green stuff pops up after a second, in some games you can play for 10 hours and nothing will happen, so I didn't even notice the problem of the first week. fortnite - ok, beamng - crash, cyberpunk - crash, but rare. Sometimes it crashed on the desktop, from telegram and other games. The problem is not related to the settings, for example, all stress tests (furmark, donut, superposition, 3dmark and the test from AMD Adrenaline itself, stability and order for an hour, even when increasing the frequency to 2500). I thought the video memory, tested the occt video memory - no errors, the video core - no errors. Started with other components - no errors. All components worked properly on my 1050, now the green stuff is on the new one. I don't know anymore what this could be connected with. The problem is related to the fact that all the problems continue on b450 motherboards. I am writing the characteristics of the 800w power supply unit, I bought it new with a video card, an expensive ryzen 5 5500 b450 asus tuf games 2 16gb RAM (one APAC strip, the second Kingston, works in overclocking, I tried to turn on the PC without overclocking the RAM - the problem persisted) Windows 10 also had problems with the video card - 1 and 3 RAM slots do not work at all. Even with one flag for 1 or 3, with all variations. No way. 2 and 4 slots work with some limitations. In one of the bright strips, the PC does not start, the second time it will start. It happened that the combination was correct, but still did not start, but it was decided to start the PC with one strip, turn off, and start with two strips. I tested the RAM with a meme test for 4 hours - everything is fine on both strips. In channels 2 and 4, the strips work fine one by one. Once I overclocked the processor incorrectly, it turned off the whole system from overheating - I didn't understand why it crashed, I looked at the temperature, it was 115, but it didn't undervolt, which is strange, like on Intel. After each reboot, the RAM stopped working from such overheating, which is why the flags changed places, started, then again in places and it started working. If you just activate it - a black screen. Sounder got the corresponding error for two long times. This is all very strange, experts help, I've already tried everything, brought it to the service - nothing, what should I do? Maybe I should replace the motherboard under warranty?

I might try this tomorrow. One side closes flush but the other is about half an inch out.

What if you do all that and it pulls 5 or 6 times and then locks bk up again please help

I just replaced mine so we’ll see what happens I had this code earlier this year and replaced the purge valve at the tank, the CEL stayed off for 6 months and now the same code. I hope this solves it

What a fucking guy after like 3 months this legend pops up and now I’m able to play Roblox without it going black I fucking love this guy

How often did you wash them? Did you air dry them or throw them in the dryer? How much did the length shrink from the new ones to the 2year old pair?

Worked like a charm. I was using lawnmower when smoke started coming out. And shut off. Changed the oil (completely black almost gray). Replaced carburetor, spark plug with a kit. Flushed the gasoline. Still wouldn’t turn on. Tried this and worked. Bit of smoke at the beginning but now runs like new. Thank you.

If this censor is out will my car shut off when i put it in drive?? Thats the problem im having now. 2010. My gage said trans was hot.

Can you show the length of the new compared to the old ones

I was able to fix it just by swapping my HDMI cable with another one. I don't remember the specs from the first cable, but it has "high speed/HEC" printed on it. The second cable says it's 8k 60hz capable. This one works perfectly. If anyone is having this problem and can't fix it, try to get a new cable.

Excellent!! Clear accurate information!! Second video I tried and your video was a complete set of instructions in a concise manner!! I appreciate it. Saved me some Money.

This won’t work for me. I hold the mute button and nothing happens.

Any idea where I can get this sensor? I’ve googled it, but they look different compared to the one in the video? Just don’t want to get the wrong one. If anyone has a link it would be greatly appreciated!

What was the car doing that made you change it

I had no idea such a small part couple make such an impact. My car was struggling to accelerate up hills and at low speeds. I got it coded, watched this video, and changed it in less than 15 minutes. Feels like a new car now 😅 Thank you!

Reinstall, checking cable, and etc still not working. Waste almost 10+hours and found ur vid. Simple and my pc working

Great patina. I didn't know chestnut could change like that.

He'll yea thanks 😊

If I get a nvidia card it will go away right?

Tried cleaning both contacts with WD40 and also slightly bend the metalic spring contact on the cover so both contacts now touch each other with more force. Seems to fix the issue for the time...

My favourite bit of RUclips is that we can’t see the dislikes anymore because of some special snowflakes that got offeneddd 😊

Thank you. I was wondering why my watch kept loosing time.

super helpful, thanks!

No clear coay? That's gonna look bad.

I think I should have watched this before apparently killing my lawn mower.

Because of the shrinkage you’d say stick to my regular size ?

Are these the pre washed or raw denim 936’s?

Sell me a pair of your used ones?

My TV won't allow me to put in 1147

Thank you for this video it fixed my ceased motor even with lawn mower oil...you are a 💎

MyColor Adjust allows you to pick a light blue and just about any color you can think off. I had this in my 2008 GT/CS plus the square button on my console that changed the ambient lighting of the cup holders and the floor lights at the foot wells and under the back of the front seats for the rear floor. Loved this total color change in interior and dash lights. I picked a lighter blue for my black and light grey interior.

Hello ,i need help display

gud vid, wish you knew or said which ones which - alotta dumnS ok this topic - for example some say the temperature related 1’s on passenger side, but others say 1 bad one can affect the other anyway, & so on etc., alotta hupla 👋😑

You have got to be kidding me there’s no way that was the issue

This worked my monitor has the amd freesync feature. Half the time it flickers off a second. Was like wtf!? 😅

i have a question i have the same software but there is no HDMI LINK ASSURANCE

This is excellent. Thank you

Almost 3 Weeks Trying Too Reconnect Subwoofee To Sound Bar This Worked , Thank You Very Very Much.

Easiest to access? My right side one is blocked by a wire, so impossible to get the wrench in there. I did it but jesus

Awesome video man thanks 💯

Thanks for video