Видео

Did you manage to save it?😳

I don’t even see Tonex in zadig 😢 can. A normal usb to C, cable be used? As I don’t have a c port on my 1 year old laptop

I've had this happen twice and I thought it was my fault, but it didn't just happen to me. I was switching from M mode to S mode and suddenly the drone fell to the ground 🤬

thanks, bro !!!

Dopeee, I want to do the same thing on my deck, using thermal paste is not as efficient 👌👌

I've notice the same thing happening to me, but only after I Avata 2 suffers a hard enough impact on the ground or tree and I an "IMU error" or "Sensor error" reading. When I switch to normal or sport form manual, the Avata 2 starts flying backwards and full speed. Two days ago my Avata 2 did a back flip and then nose dive into the dirt after switch from manual to sport.

Copper reacts with liquid metal 🤦

no, no bug at all. you were simply too close to the ground/ too late to pull out( that's what she said) of the dive. I saw no issue of control interruptions. you were down to 12%, you already got, or should have gotten an alert that power was reduced. even if you didn't, now you know, under 33%, cruise home. heck under 50% cruise home and store the batteries happy.... sucking them down to 10% or less is NEVER good. they don't like staying this low. sorry, user error, lack of power from low battery and crazy maneuvers... ( I do acro on the O.G. Avata all the time) now maybe the Avata 2 changes from sport to manual instantly, unlike the first one. maybe that's the issue. should be an update for that.

no punch outs or heavy throttle commands when the battery is that low! (it was less than 15%) that's probably why it browned out.

I was actually trying to control it as I lost control when I changed to sport mode. It just went drifting to the right and up. There is a river few meters away that's why I was figthing to get control. But yeah once I had it o manual it just dove straight down. Minimal damage good thing ai printed a gimbal protector and those side protector.

I cant say one way or the other, but I can tell you what I did notice. After you switched into sport and then tried to go back into manual, your gimbal tilt angle was fluctuating rapidly and wildly. It also looks like the drone was responding to your stick inputs while you were trying to switch. For me when I switch to manual from normal or sport mode, just let go of the right stick entirely as it needs to be centered. then just hold the left stick inside the little bar for a moment and it should be a smoother transition. In conclusion I would say there appears to be some pilot error but ultimately it sure look like it just dropped straight down out of the sky. I've had mine drop sideways on me from a hard turn but never face down like that. I hope any damage was minimal!

I downloaded it but some reason nothing shows up in the drop down box.. NM I found it. My issue is it won’t update firmware and usb communication error

Man, thanks a lot!

Seems to be a continuing problem with tonex pedal. Had to send mine back to Sweetwater for repairs.

I bought a mint condition (except for a failed sdd) surface pro for real cheap. Im thinking on booting from a microsd card and running my system from there. would you say thats doable?

wrong way and those pads on Ram chips are bad too but ok

That's way too much liquid metal.

really need your help how to setup steam deck controller on ryujinx? im using dual boot steam deck windows 10

Couldnt really tell if either ran well or better than the other with it sped up. Which ran the emulator better?

Your char sucks dude

Don't be a dumbass and do this to your deck

do you guys not read instructions ? if it takes 24 hours for the conformal coating to seal and heal. why would u slap it on, throw in some liquid metal right away and power it up. the professional way to do it would be putting 2 layers and waiting 24 hours to apply liquid metal

I have issue using steam controller driver and steam at the same time, I usually disable the SWICD when running steam or stopping steam when use just SWICD for diablo 2 for example

Thank you.

Even you don't have remote play button inside game pass launcher? Did you get swicd with ps remote play ? If yes,how?

what size thermal pads are those? Any issues closing the deck? Looking at doing something similar. What were your gains? was it worth it?

no fps counter?

how, and what areas did you apply the conformal coating? This is something I wish to do with my steam deck but i don’t know what stuff to coat, in for future protection

Was it worth it?

do you know any solution for black bars?

I noticed you are not using eletronic rape to trap the LM inside the heatsink in order to avoid shortage. If you're already using tape then it's not showing. Any further tips?

Can you use the right stick to target skills instead? The track pad looks hard to use.

How do you get rumble with swcid

I personally prefer KODI to Steam Big Picture Mode as a default interface. I used to run my Alienware Alpha like that. My PREFERRED windows user interface for the deck would be Windows 8.1, if I am completely honest. I used 8.1 on a T100 Transformer book and it was an absolute delight. But despite trying for several hours to rewrite drivers to work, I could not get 8.1 to 'work' on the deck. Which is a damnable shame. Windows 10 and 11 (and for that matter, all flavors of linux) are just vastly inferior to windows 8.1 when it comes to useability with a touchscreen and controller.

Yes it's easy to do but pointless to me, you can't do basic things like change brightness, turn on or off bluetooth and wifi, or changing TDP, so i would have always to start it in big picture and then close it to Windows desktop to change those things

I used to do this on my old desktop but from experience, skipping explorer.exe sometimes causes issues with Bluetooth controllers.

Wish this would work on Mines. No beta version of Microsoft edge

what do u use this for?

Kinda blasphemous but I'll allow it

Nice

Nice

Y tho

Cool

Hi are you running this with SteamOS?

Hey there this legit I have a psvita on CFW 3.60 enso and I have done this when I set up my sd2vita I downloaded all the psvita games on my original memory card and then copied everything that was inside the ux0 folder on my pc to the sd card works without any problems.

What's your PC config?

how to get rid of ugly red screen?

8re ?

Fake

Hi, do you have any guide to get display Port working ?