Видео

@@The_VietnAmerican yes I can, won't be right away but I'll try get one done in a couple of weeks.

@ no rush! Thanks!

@@John-s5s9i buy a new one, they are only 20 quid and don't do that again lol.

@@tohaalaidroos591 Hi bud, no, you would need to change the body mounts.

@@anishkumars7064 I havnt checked but it's not that fast. alright for a large room, indoors.

@@KeLee-wz6wc yes bud, you can also. install the Hobbywing bl30 which is a bit smaller and just as good. This was mentioned in one of the comments 👊.

yes, exactly the same. 👊

@@JayCanfield Thanks for the comment bud, Glad It helped you out 👊

@@Doeswhatitsays-cc1ce Love the content style. Calm, to the point with insightful advice on things you ran into. The stripped screw in the diff is a perfect example. A lot of other creators in the RC space could take tips on how-to's from you. Hope to see more.

@JayCanfield Thanks man 👊 I have other stuff on the way just moving house at the mo. 👍

if I remember correctly, yes it does, just not with steering. also has 2 speeds on the controller.

@@nastygollum I'm pretty sure it would. be perfect for it. 👊

​Awesome. Would the (single) fan be also put in channel 6? The instructions mentioned something about channel 6 being reserved for the gyro? Otherwise does it matter ?​@@Doeswhatitsays-cc1ce

@nastygollum don't think it matters. They all supply power.

@@jaredsayers9920 Good stuff, and good luck, these things can be tricky sometimes. Thanks for the comment bud 👊

@@savihalba hi bud, I haven't tried the newer transmitter. I havnt had a go at getting the lights working but I'll see if I can get it done. I'm a bit tied up at the moment as I've been moving house, soon as I'm sorted I'll be back on it, just got stuff all over the place at the mo.

@@Doeswhatitsays-cc1ce thanks for the answer. Good luck on the move.

@@eliflynn7282 I'll be honest and say I don't have a h14 but with the 301 tyres being flat, and on concurved, they will have better grip on tarmac.

@@markathompson Thanks bud, that's what I'm aiming for. I'm glad this is being recognised. cheers mate 👊

@Doeswhatitsays-cc1ce you are welcome 💪

@@fortisbellator_ hi bud, there is adjustment on the sterling links, the arms going to the servo. you can adjust the toe with these. Just turn the bar between the end links. Or you can look up adjusting the toe in and out and for what usage you would apply in or out. Hope that helps.

hi bud, it's been fine so far. The magnets can be glued if you want, I haven't had a problem. with them so far and no bars have bent. Not everyone has availability of a glue gun or old enough to use one. but magnets can be used in this way as a glue less easy to mount system. which is what I done it for. So for hard bashing yeah will prob fall off, but if ya bashing these things that hard then ya prob got bigger better cars to bash than this one.

@@mpampis_o_fou hi bud, I have had no issues with delay with this new transmitter and receiver. 👊 no need to adjust the throttle.

@@coreytaran9689 hi mate, yes you can. You actually have more control. On the original. you have off, 75% and 100%. on this controller you get 0-100. you can set the speed to whatever you want and all done on the controller 👊

@@kjetilpedersen583 nice 👊

@@unknow1288 ruclips.net/video/8DKcOz0O5ko/видео.htmlsi=S2e-VaFvf42wtb1V

@@360woodierc na it's not to bad, just take your time bud 👊.

@@johnrangoo Thinking back to when I made this video, I was on the understanding that the shafts were of a better quality and fitment for the bearings. So I changed them. There is no slack on them now so can rule these out from any problems with steering slack in the future. You can prob leave the originals in and they will be fine.

@@anthonyzamano3929 Heya bud, might be worth you going through it again, only way to find out is to open it up again and see if you have missed something out or not put something back. Let me know how it goes please dude, be interested in knowing what caused that so other people can learn if there was a mistake.

@@Mr316jon316 hi bud, I would say the v64 are faster, better handling and quality, but the turbo racing are still awesome, I'm in no way saying one is better than the other, they are both really good and you'll be happy with any of them. If I were only getting one, it would be the v64 van. But I'd still want the other lol

If you want to race them, it depends on the surface the tracks are made of , at top speed on sharp turns , the turbo will stick to the tracks while the V64 sometimes flip on high speed at sharp turns . This video made me hunt down 3sets of anki tracks , I enjoy racing the V64 at First speed on anki tracks , it’s easier to control the while the turbo c-75 will sometimes loose traction and becomes a drift car, my recommendation is you get one of each so you can race and fell the excitement, it’s like owning a bus and a car , they are different feelings

@titusm hi bud, I've not had that happen to me, yet, but when it does I'll know what the problem is and put a fix up but untill it happens, this won't fix a wobbly wheel. It will give better control and responce. sorry I can't answer your question untill I have experienced it.

@@Doeswhatitsays-cc1ce Thanks. It might be that the other videos with that issue might have been wrong. I looked at your video to understand how the steering is for this rc before buying. It helped a lot. Thank you.

@titusm no probs at all. 👊

​​@@Doeswhatitsays-cc1ceIs there any video about fixing wheels wobble for 14210 or similar please share it, I found many videos for other RC cars but with different mechanism and dont worry I have many shims 😂 I have stock 14209 some v2 with hex screws and partialy metal steering like in this vid but there is plenty room for shims everywhere

@@aminirfan2716 I don't think so.

@@Sam-nz2zs it should. do yes, but if your gonna be using them. solely for drifting then you may want to lock the rear diffs and stiffen up the rear shocks.

@ really all round on and off road. Concrete and grass and dirt

@@Sam-nz2zs I can't say, I haven't tried to drift on grass, or dirt. I would look at my guide as being on Rd and for racing not so much drifting.

@ so what diff oils would you recommend for standard bashing on road and off road for this rally car ??

@Sam-nz2zs same as what I say in the video, it's bashing so will work.

@@Sam-nz2zs same as you, I haven't read the manual. but after opening all my mjx diffs, none were filled properly from factory. better to re do them with what I've said in the video or if you know what you need for how you drive then go for it 👊

@ I don’t know but with your diff oils will the car still drift on road and off road?

@@Sam-nz2zs yes, mine does.

@@NotThatOneThisOne Heya mate, I believe you just turn the gyro around. some have a switch, some don't and you just spin em round. 👊 BUT the dumborc gyro has a small button, push it twice and should flip the direction.

@@user-wp9mz Hahaha thanks mate, glad they helped you dude!

@@TheKeks2011 hi bud, I havnt tried different batteries but for a charger I can recommend a Turnigy accucel 6....as this is what I have used for over 8 years now.

@@Doeswhatitsays-cc1ce tha nk you my friend

@@sandervandijk7440 yeah, there awesome little cars!

@@garywilson6146 Glad to help bud 👊

@@m_san_d I've not tryed that yet, only because I prefer the ldarc, but when I get a chance I'll give it a go, probably won't work though.

@@Doeswhatitsays-cc1ce tyvm, yeh the ldarcs are awsome, spliced a skeletor van and gravdigger on the two extra shells of my daughter's m58

@@The_RC_Family Hi mate, it does help as the servo and servo saver are stronger, but it will still happen. i have an idea on a fix for that but I need to try it out first.

​@@Doeswhatitsays-cc1cea fix for that would be great. Thinking about printing something with 3d printer

@@NoodlesNJ1 What do you mean everytime you post I delete? I made a mistake on a video which you quite rightly pointed out, your comment was not deleted, I actually removed the video took your advice and reposted a revised video which is the one you are commenting on now. if you look at the title, it says, REVISED! So I don't keep deleting your posts, as you have only ever posted on the old part 1 video. Your comment has gone because the video has gone. I havnt repeatedly deleted your comments and anyone on here can vouch for that as they would have seen them, feel free to speak up anyone who thinks I've been deleting peoples comments. In regards to your experience, I have been into the hobby for over 30 years, and had plenty of different brands through the years but I really don't see how this matters! Your not better or worse than anyone else, so I don't know why you felt the need to express this in a comment on my channel. I have not once mentioned how experienced I am in any video, there's no need too. If you have all this knowledge, start a channel and help people out! Don't let your knowledge go to waste. I'm not sure about heating up the end of a screwdriver to loosen the screw, But I have never done it that way, if I found this to difficult I would heat the brace bar the other side of the screw, as we all know metal expands when heated, then I would hold an ice cube on the screw head to cool it, reducing the size of the screw, and releasing the grip of the lock tight. This is my method, but I will try yours next time to see if it works better and let you know the better method so everyone can get them out with ease. Perhaps you could try my way and see what you think? Don't take this comment out of context, everything I have just said I have said in a very respectful way and in a friendly manor. Your message will stay here as I haven't yet deleted anyone's comment from my channel, good or bad, apart from any which were on the original video as they got removed with the video. People can make there own mind up on watching my videos or taking any advice. If they don't like them, then there are other channels they can also watch. If they do watch and like then I thank them all as much as they thank me. 👊

Why don't you make a perfect video and show us?

@@anthonylim5120 Ok

@@oldmandoingstuff8997 Thanks man, I'm going through moving house at the moment, once I'm settled ill be back on top again. Defo gonna do some guitar videos, I made my intro music lol

10-4​@@Doeswhatitsays-cc1ce