- Видео 44
- Просмотров 65 547
Secondary Machine
Добавлен 13 ноя 2022
How to paint a lathe pt.2
In the second part of the series, I talk about choosing the proper tools, their use and some basic painting techniques.
Просмотров: 475
Видео
How to paint a lathe pt.1
Просмотров 3907 месяцев назад
Jumping in to prepping the South Bend 9A for restoration and paint.
Did I get scammed on the South Bend 10K?
Просмотров 2,5 тыс.7 месяцев назад
Please excuse the clickbaitish title…it was the best I could come up wit. Just a quick update on my plans to restore bothe the 10K and the 9A.
A bad case of the South Bends
Просмотров 2,6 тыс.8 месяцев назад
Another South Bend 10k in the shop. That’s 4 lathes in 3 weeks. I should probably seek help, but I’m busy having too much fun. Subscribe and stay tuned for the restoration.
6” mill riser is complete!
Просмотров 8618 месяцев назад
Today I was able to complete the mill riser and get it installed.
I got another South Bend 9” and lots of spare parts.
Просмотров 3848 месяцев назад
See something you need? Give me a shout. Eric 3608407139
South Bend 9A followed me home
Просмотров 1,4 тыс.8 месяцев назад
I told you there’d be another lathe..
Enco mill power feed final and electrical work.
Просмотров 2299 месяцев назад
Enco mill now has X power feed and will be getting some final electrical work also. Pleas click the like and subscribe..
Enco mill power x feed update
Просмотров 7589 месяцев назад
Power feed is coming along, but had one major issue, which required a bit of a work around.
Putting a Servo power feed on the Enco mill. South Bend 10K lathe is up and running again..
Просмотров 3099 месяцев назад
see title. Oh, and like and subscribe pls.
South Bend 10k Metal Lathe 1HP motor upgrade
Просмотров 1,1 тыс.9 месяцев назад
Made some progress on the 1HP motor upgrade.
South Bend 10” lathe spindle inspection
Просмотров 9509 месяцев назад
Today i pulled the spindle so that I could inspect the bearing surfaces and install new oil wicks and rubber drive belt. Hit the like and subscribe please
I built a stand for the Enco mill/ HF led lighting review
Просмотров 3729 месяцев назад
I built a stand for the Enco mill/ HF led lighting review
Enco mill DRO install pt.3 How to deal with two draft angles.
Просмотров 48910 месяцев назад
Enco mill DRO install pt.3 How to deal with two draft angles.
Clausing 8520 vs. Enco 100-5100 mini knee mill comparison.
Просмотров 2,4 тыс.10 месяцев назад
Clausing 8520 vs. Enco 100-5100 mini knee mill comparison.
Another mini knee mill?! Are you kidding?!
Просмотров 3,8 тыс.10 месяцев назад
Another mini knee mill?! Are you kidding?!
I’ve got a thing for small knee mills. Enco 100-5100
Просмотров 3,4 тыс.10 месяцев назад
I’ve got a thing for small knee mills. Enco 100-5100
Clausing 8520 spindle bearing replacement pt.3 / 24 tooth Atlas lathe gear
Просмотров 62511 месяцев назад
Clausing 8520 spindle bearing replacement pt.3 / 24 tooth Atlas lathe gear
Clausing 8520 spindle bearing install pt. 2
Просмотров 47411 месяцев назад
Clausing 8520 spindle bearing install pt. 2
Clausing 8520 spindle bearing install pt.1
Просмотров 66311 месяцев назад
Clausing 8520 spindle bearing install pt.1
Atlas/craftsman Commercial lathe first cuts update.
Просмотров 67011 месяцев назад
Atlas/craftsman Commercial lathe first cuts update.
Atlas lathe update/Clausing 8520 is getting new spindle bearings
Просмотров 951Год назад
Atlas lathe update/Clausing 8520 is getting new spindle bearings
Hi, if it's for sal, I'll pay you a good price 😅
Morse taper adapters for drill press, tailstock or headstock spindles
Where are the big mills? I only see baby mills
having to plan ahead ( order of operations) is something i had not considered as being an art or knack that is required to machine parts without loosing accuracy or as you put it ' painting yourself into a corner'. I love it now.. like preplaying a chess game in your head or on paper when not even near the workshop.
you could have added the a telescope function or offset to the riser you made (?)
Eric. Can you show a video of how you took apart the x axis table top?
I have the same Mill Mach.
3608407139
it is a very cheap part to change out yourself if you need to
It's the board..
I wish I could find a Clausing like that. Very nice
I'm getting dizzy
I think I saw a surface gage on the table behind the surface plate. That’s a much better tool to use with a test indicator than the magnetic indicator holder you were using. Anyway, that little vise should work fine with your bench top mill. Have fun with it !!
Thanks for the painting advice, much appreciated. Best wishes on your upcoming move with your son.
Thank you, Brian.
Great tips on painting. I'll be coming back to this video next time I paint a machine
Thank you
What are the things you prefer on the SB 10k over the Atlas 10/12s? Am I correct that they both have a .750ish spindle bore?
The Atlas lathes were designed to hit a price point, which made for some shortcuts like gears that aren't made of steel. The SB lathes are much higher quality and weigh substantially more
did you use a new oil seal? if so which one?
Oil seal for what?
@@secondarymachine7521 seal is pressed into the closure plate at the bottom of the spindle.
@@fcc9281 It's for grease, not oil. Yes, I replaced it. I ordered it directly from Causing, but don't have part number.
What are you using for that verticle way cover? Looks like fiberglass mat, maybe rubber? How is it secured at the bottom?
Both mills have thin rubber as protection. Screws and a long thin piece of metal, makes a “sandwich” which holds it in place.
I would buy a follow rest for my 10k and have a question. My gear changes all work very smooth with exception to the first tumbler in the "A" position. no matter what I do it will not engage even while turning the chuck. Any ideas?
It looks like it's barely done any work. Southbend, the most copied lathe ever made.
if you look down the ways with the light just right, you can still see the scraping all the way down it. Lots of life left in this one..
great start - thanks for the degreasing tips
Thanks for watching, Joell
Looking forward to the painting tutorial 😉
Thanks, Joell.
as the owner of a lovely, low use Model 9A, I would have held out for a heavy 10. the 10K is basically a 9A.
The 10k is a step up from the 9 for sure. I will have a heavy 10 someday if the right opportunity presents itself..
Oh man I should of gotten a southbend instead of a Japanese lol
What do you have?
McMaster Carr is top shelf. I usually get 2 day delivery and I live in Texas.
How much? .
Thanks! What year us it? Didn't think anything with sleeve bearings was anywhere but a museum.
👍👍😎👍👍
Keep 10K or put on the large dials. I am second owner of a privately owned 10K 3ft with large dials. Go to lathe with collects.
I may swap the large dials onto my lathe..
**Ace Rust Stop will be the paint. Not Rust-Oleum..
Olá amigo!!! Estou maravilhado com sua oficina, com estas maravilhas de torno,parabéns!!! Lhe desejo muita saúde e cada vez mais sucesso!!!
Thank you, Amigo..
Eu que agradeço amigo@@secondarymachine7521 , obrigado!!!
Damn,,, it looked cold there in the workshop with the visible breath coming out of your mouth. Anyway I have enjoyed your channel for a while now and I’m wanting to flick you a few NZD in order to in some way encourage you in your RUclips endeavours. Let me know how to do this, I support only a few makers on RUclips by the occasional donation and you qualify for my meagre attempt at encouraging you guys to keep making videos.
Thanks Eric,,, such enthusiasm which is inspiring to a person like me. You are definitely a glass half full person.
Thank you Brian.
Very cool ! You've got some nice machines there .
Soon to be nicer, Ed. Thank you for watching and taking the time to comment..
Oh brother, toss that thrust bearing into junk, don`t waste evaporust on it... A bearing that has had any amount of rust in it is dead... No amount of evaporust and grease will fix a ruined bearing... Evaporust the gears and other stuff, that is worth the time, and is not as ridiculously critical as bearing surfaces... Speaking of bearing surfaces, those spindle bronze bearings look nice! All the best and kind regards! Steuss P.s. Looking forward to the painting series!
The problem with just tossing that bearing is that you literally can't buy that bearing anymore. I will at least attempt to bring it back. So far the rust that is on the machine appears to be pretty light and I think the bearing is primarily filled with bad grease...fingers crossed..
@@secondarymachine7521 Huh? Can`t you find a replacement part? I know that machines can come with morbidly stupid bearings and bearing dimensions which are not offered lest ordered as a custom bearing, but hell, there should be something that can replace it? Even if it is a needle thrust bearing... Yeah, i saw the thing, it could be mostly oxidized grease, but i tend to air on the pragmatic surgeon`s methods when dealing with bearings if I even sense a hint of crunch or any nonsense about it that isn`t as smooth as butter... Hopefully it`s just junk grease, if not, well, there is a part that would be worth making on a cnc grinder or even a competent lathe with the ability to produce supreme bearing finishes... I mean, thrust bearings are as simple as it gets, just a tad more complex than a simple bronze bush or bronze thrust washer... The balls are industrial lego and can be had in any material needed, and the races are literally precision grooved washers... The cages, well, they are a bitch, but those could be easily made differently and allow the bearing to function just as good... A decent cnc lathe with the ability to make such races could easily make the cages by just p.c.d. drill-reaming a chunk of bronze or brass to adequately space out the bearing balls... Shit, a good manual set of machines could do it just as well on a 1off basis... Kind regards and best wishes(especially regarding the bearing situation)!
No, you can't get this baring anymore. I do think someone on ebay is selling a thrust bearing that will make it go, but I don't want that on my lathe if I can avoid it. This bearing was made for Southbend and long since unavailable unless you buy used.. @@camillosteuss
@@secondarymachine7521 Hell, if you don`t mind, write down the specific dimensions and ball size for me... I am not promising anything anytime soon, but once i get a new shop built, contend with all of my machines that need an overhaul or a service, and finish dealing with all the shit that i severely overlooked - I will likely add that bearing to a list of parts that i will be making and offering... Yeah, i get not wanting to just compromise willy nilly with random - possibly adequate bearings, especially if no true-to-type replacement is to be found... Regarding the dimensions, it`s od, id, ball size, race thickness(i assume both are the same), assembled bearing thickness(groove calc. through previous sizes), ball amount and that`s it really, as i will likely be making the cages out of bronze(if nothing, it will look better in tandem with bronze spindle bearings)... Now, preferably, all dimensions would be in sub-micron range, but for what this bearing is, a micron readout will do quite well... I will draw a tech print and insert it into my folder until the time i can get down to biz... You needn`t rush, but if/when you find some time to do so, i would appreciate it, and i think that one day, a lot of people will too... All the best!
Why not just Give prices ? What we want to hear .
You're the ONLY person that has asked..
I don't know , I would guess others in the market for a lathe are interested in what he paid for them ?
What you pay will have a lot to do with your location. Things on the West coast are more expensive than the Mid West as an example.@@edflower109
What spindle taper do you have? MT2 or BS7
This one was MT2
Nice score! Finding one with all the horizontal conversion parts is pretty rare. Although, part of the reason all those horizontal milling parts get lost is because they were so infrequently used.
An early Bridgeport round ram with the 36" table is a great machine for home shop guys. You can find them with the J head, which takes R8. The original M head is a MT2 spindle, shorter quill travel, no power down feed. Anytime I see one of those Clausing mills on the west coast, the seller is asking crazy money. I have a full size Bridgeport, which is a big step up from my last mill (Burke Millrite), but if I ever need to sell it and downsize, I'd probably get the HF knee mill, which is the same machine as that Enco
Hello from Washington!
At least your machines are relatively small. I bought a lathe that is practically the same as the one I already had but one model newer and in better condition but they weigh 5,000 lbs each
That floor looks slippery....
Lol. That spot that looks like it is glossy is actually just white spray paint. But you're right, it did look like it would be slick...
Repair kits are sold for the backgears that is an easy peasy repair. Google online.
I can stop if I need to..well maybe not...I have a 200 year old lathe, aSouthbend and a complete Atlas with a full set of tooling.
There's something about vintage cast iron..
@@secondarymachine7521 Super cool. I wish I could save all the old machines.
Very nice machines. Love your work
Thank you
I have a 9" engine lathe from them
I think I might be able to repair the pully with care as *bronze type flame repair with flux rod. Understanding the outer radius might be difficult if existing damage or heat process repair cause distortion. I have resorted to ebay for some small parts and continue to study best upgrade as to my SB 9C. It's SN 62016. I traded a day and a half of fitter work for the lathe, stored outside and where I have cleaned and repaired to basic functions. I find I so like it's useful component as to my workshop. I watch Max Grant's Swan Valley channel and have gained real insight to repair some of the features. Watching with interest and delighted to see your new machines in progress. Regards, McGary
Want to know how to break the teeth on a bull gear? Engage the back gear and don't pull the pin on the bull gear to lock the plot up to break the chuck loose from the spindle.
How much you want for that mill?
Looks like it is already spoken for.
@@secondarymachine7521 Oh Darn thanks
Did similar riser for my Jet mill.
Big improvement? Any drawbacks?
I've got the same mill, and I did the exact same thing with mine. Spinning a 66lb chunk of cast iron in a 10 lathe was scary. I bought a 6"dia cylinder of iron from MC Master and bored about 3" out of the center. When I put the riser on I used lapping compound to flatten the surface of the original casting. I think you'll be very happy with the mill, I am.
I didn't think to try the lapping compound. Turns out I didn't even need to re tram Y and X is only about .oo4" high at the back of the table. Not too bad..
stumbled over video, why are you changing ?
Changing what? Mills? I got a really good deal on the Enco, so selling off the Clausing. Hope I understood the question correctly..
Very impressive.
Thank you, Gary!